summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-29drivers: net: fsl-mc: add support for CONFIG_DM_ETHIoana Ciornei
Make any adjustments necessary in order to support DPAA2 devices probed using CONFIG_DM_ETH. While at it, fixup some styling issues aroung the switch-case statement. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: ldpaa: add DTS based probing supportIoana Ciornei
When CONFIG_DM_ETH is enabled DPAA2 network interfaces will now probe based on DTS nodes with the "fsl,qoriq-mc-dpmac" compatible. In this case, transform the ldpaa_eth driver into a UCLASS_ETH driver and reuse the _open()/_tx()/_stop() functions already inplemented. For the moment, the ldpaa_eth driver will support both configurations: with or without CONFIG_DM_ETH enabled. Any 'struct eth_device' occurrence now has a matching 'struct udevice' made mutually exclusive based on the state of CONFIG_DM_ETH. Signed-off-by: Florin Laurentiu Chiculita <florinlaurentiu.chiculita@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: add Layerscape mEMAC MDIO driverIoana Ciornei
Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate Ethernet Media Access Controller) and the Fman 10G Ethernet MACs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28lx2160a : Update eMMC boot environment variableMeenakshi Aggarwal
Update mcinitcmd and bootcmd environment variable for emmc boot. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls208xa: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1028a: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1088a: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Move GIC RD tables init to soc.cHou Zhiqiang
Move GIC redistributor tables initialization to CPU setup function. This patch introduces a GIC redistributor tables init function, and moves the function of reserving memory for GIC redistributor tables to soc.c and adds a argument for the memory size to reserve, BTW rename the function so that it is more readable. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Kconfig: Select RESV_RAM if GIC_V3_ITSHou Zhiqiang
The GIC redistributor tables initialization depends on RESV_RAM config, so select RESV_RAM if GIC_V3_ITS is enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28board: lx2160a: Align RD tables address to 64KBHou Zhiqiang
As the lower 16bit of the redistributor pending table is reserved for describing the memory attributes, we must give a 64KB aligned address to the GIC LPI initialization function. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28board: lx2160a: Add check in GIC RD tables initHou Zhiqiang
Program the GIC redistributor tables only when succeeded to reserve memory for them, otherwise kernel will lose the chance to program them using allocated memory. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Add RESV_RAM check in resv_ram addrHou Zhiqiang
The initialization of gd->arch.resv_ram pointer should depend on if the RESV_RAM config is enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28armv8: ls1046ardb: update the DIMM WRLVL_START valueYuantian Tang
The WRLVL_START values are optimized for old DDR MTA18ASF1G72AZ. Update DDR struct to set new WRLVL_START values so that the new DIMM MTA18ADF2G72AZ get optimized and the old DIMM still works. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1021a: Append CMA configuration to bootargsAlison Wang
The default reserved memory for CMA is high memory. If LPAE is enabled, highmem pages are non-remapped and can not be used with dma_alloc_coherent. Reserving low memory for CMA is needed for LS1021A. This patch appends the related CMA configuration to bootargs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28include/configs: ls1012afrwy: support dhcp bootBiwen Li
Add support of dhcp boot for ls1012afrwy Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-27Merge tag 'video-for-v2020.07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - simple panel 'nv140fhmn49' compatible - rockchip eDP and LVDS drivers build fix
2020-04-26video: simple_panel: add boe,nv140fhmn49 displayPeter Robinson
add "boe,nv140fhmn49" display to compatible node. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Anatolij Gustschin <agust@denx.de>
2020-04-26drivers: video: rockchip: fix building eDP and LVDS driversPeter Robinson
The rk_edp.c and rk_lvds.c files reference rk_setreg which is declared in hardware.h so include it so the drivers build. Adjust rk_lvds.c so includes are in alphabetical order while updating. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Vagrant Cascadian <vagrant@debian.org>
2020-04-25Merge branch '2020-04-25-master-imports'Tom Rini
- Assorted minor fixes - Actions S700 SoC and Cubieboard7 support
2020-04-24rtc: ds1374: typo WatchdogHeinrich Schuchardt
%s/Watchdoc/Watchdog/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24spi: mpc8xxx_spi: fix missing dev_err definitionRasmus Villemoes
The build currently fails with drivers/spi/mpc8xxx_spi.c:64:3: warning: implicit declaration of function ‘dev_err’ [-Wimplicit-function-declaration] ... drivers/spi/built-in.o: In function `mpc8xxx_spi_set_speed': drivers/spi/mpc8xxx_spi.c:227: undefined reference to `dev_err' Fixes: 4856cc7a97 (mpc8xxx_spi: implement real ->set_speed) Fixes: 1a7b462dee (mpc8xxx_spi: put max_cs to use) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-04-24spl: fit: do not check argument of free()Heinrich Schuchardt
The free() function checks if its argument is NULL. It is superfluous to do the same check on the calling side. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24MAINTAINERS: add entry for cubieboard7 configAmit Singh Tomar
This commit adds entry for cubieboard7 config under Actions Semi OWL family. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24doc: boards: add Cubieboard7 documentationAmit Singh Tomar
This adds build and flash steps for Actions S700 based Cubieboard7 board. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: add Cubieboard7 board supportAmit Singh Tomar
The Cubieboard is a single board computer containing a Actions S700 SoC(with 4 ARMv8 Cortex-A53 cores). This patch adds respective defconfig alongwith .dts(copied from Linux v5.5-rc6 with hash "b3a987b0264d"). Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24actions: Move defconfig options to KconfigAmit Singh Tomar
This patch moves some of the config options from bubblegum_96_defconfig to respective Kconfig files. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: add support Actions Semi S700Amit Singh Tomar
This patch adds basic support for Actions Semi based S700 SoC, which is driven by common owl framework. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: dts: actions: s700: add u-boot specific dtsi fileAmit Singh Tomar
Devices like uart and clk are needed to be enabled before relocation. this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: actions: add S700 SoC device treeAmit Singh Tomar
This patch adds .dtsi file(sync with Linux 5.5-rc6 with hash "b3a987b0264d") and required binding for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores. It also provisions dts file to be built based on selected platform(CONFIG_MACH_S900/S700). Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24clk: actions: Add common clock driverAmit Singh Tomar
This patch converts S900 clock driver to something common that can be used for other SoCs, for instance S700(few of clk registers are same). Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: dts: actions: s900: add u-boot specific dtsi fileAmit Singh Tomar
Devices like uart and clk are needed to be enabled before relocation. This patch adds u-boot.dtsi file that mark these device as dm-pre-reloc. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: dts: sync dts for Action Semi S900Amit Singh Tomar
Synchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b0264d". Also, it removes older clock binding defined for S900 along with undocumented compatible string "actions,s900-serial" from serial driver and adapts clock driver to cater to new bindings. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24serial: actions: add compatible stringAmit Singh Tomar
This patch adds "actions,owl-uart" string to the owl uart driver. It is also defined in Linux kernel. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: actions: rename sysmap-s900 to sysmap-owlAmit Singh Tomar
Now that memory maps(for both S700 and S900 SoCs) can be managed using a common file, rename sysmap-s900 to sysmap-owl to reflect the same. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: actions: Add common framework for Actions Owl Semi SoCsAmit Singh Tomar
This commit adds common arch support for Actions Semi Owl series SoCs and removes the Bubblegum96 board files. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24coccinelle: adjust NULL check before free()Heinrich Schuchardt
The free() function checks if its argument is NULL. We should avoid checking for NULL before calling free like in     if (result->tds)         free(result->tds); The list of relevant functions differs between Linux and U-Boot, e.g. we use free(). Adjust the list of relevant functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24coccinelle: check for casting malloc outputHeinrich Schuchardt
Casting the (void *) output of memory allocation functions before assignment like in sata->cmd_hdr_tbl_offset = (void *)malloc(length + align); is useless. Adopt the Linux kernel script scripts/coccinelle/api/alloc/alloc_cast.cocci. Now 'make coccicheck' generates warnings like: ./drivers/ata/fsl_sata.c:143:29-33: WARNING: casting value returned by memory allocation function to (void *) is useless. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24kbuild: cherry-pick kbuild changes from LinuxMasahiro Yamada
b42841b7bb62 kbuild: Get rid of KBUILD_STR 2aedcd098a94 kbuild: suppress annoying "... is up to date." message 9c8fa9bc08f6 kbuild: fix if_change and friends to consider argument order ebf003f0cfb3 kbuild: Consolidate header generation from ASM offset information 2982c953570b kbuild: remove redundant $(wildcard ...) for cmd_files calculation 8a78756eb545 kbuild: create object directories simpler and faster 4d4b5c2e3b6e treewide: remove explicit rules for *offsets.s 01d509a48b46 kbuild: remove unimportant comments from ./Kbuild Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-24kbuild: add FORCE to dependency of $(obj)/dts/dt-platdata.oMasahiro Yamada
if_changed must have FORCE as a prerequisite. Add $(obj)/dts/dt-platdata.o to 'targets' so that the corresponding .cmd file is included. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-24cache: l2x0: Fix write to incorrect shared-override bitLey Foon Tan
The existing code write bit-0 for shared attribute override enable bit. It should be bit-22 based on cache controller specification [1]. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0246f/DDI0246F_l2c310_r3p2_trm.pdf Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-24README: remove references on no more used config CONFIG_SYS_RCAR_I2C*Patrick Delaunay
Remove the references in README on CONFIG_SYS_RCAR_I2C_* not use in U-Boot drivers/i2c/rcar_i2c.c, since commit a4d9aafadb31 ("i2c: rcar_i2c: Remove the driver") and commit a06a0ac36d59 ("i2c: rcar_i2c: Add DM and DT capable I2C driver") Checked by the command: grep -r SYS_RCAR_I2C * And these CONFIG are only defined in arch/arm/mach-rmobile/include/mach/rcar-base.h Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-24cosmetic: README: Fix one CONFIG namePatrick Delaunay
Only replace CONFIF_ by CONFIG_ Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-24dm: mmc: Update mmc_get_mmc_dev() to use const *Simon Glass
This function does not modify the device to change it to use const *, so that callers with a const udevice * can call it without a cast. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-24pci: Add a macro to convert BDF from linux to U-BootSimon Glass
U-Boot's BDF format has its bits in the same position as the device tree PCI definition. Some x86 devices use linux format in their register format and it is useful to be able to convert to U-Boot format. Add a macro for this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-24uuid: Use const char * where possibleSimon Glass
Update the arguments of these functions so they can be called from code which uses constant strings. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-24lib: Add a function to convert a string to upper caseSimon Glass
Add a helper function for this operation. Update the strtoul() tests to check upper case as well. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24test: Add the beginnings of some string testsSimon Glass
There are quite a few string functions in U-Boot with no tests. Make a start by adding a test for strtoul(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-24lib: strto: Stop detection when invalid char is usedMichal Simek
This issue has been found when mtd partition are specified. Autodetection code should stop when the first invalid char is found. Here is the example of commands: setenv mtdids nand0=memory-controller@e000e000 setenv mtdparts "mtdparts=nand0:4m(boot),4m(env),64m(kernel),96m(rootfs)" mtd list Before: Zynq> mtd list List of MTD devices: * nand0 - type: NAND flash - block size: 0x20000 bytes - min I/O: 0x800 bytes - OOB size: 64 bytes - OOB available: 16 bytes - ECC strength: 1 bits - ECC step size: 2048 bytes - bitflip threshold: 1 bits - 0x000000000000-0x000010000000 : "nand0" - 0x000000000000-0x000000400000 : "boot" - 0x000000400000-0x000000800000 : "env" - 0x000000800000-0x000006c00000 : "kernel" - 0x000006c00000-0x000010000000 : "rootfs" Where it is visible that kernel partition has 100m instead of 64m After: Zynq> mtd list * nand0 - type: NAND flash - block size: 0x20000 bytes - min I/O: 0x800 bytes - OOB size: 64 bytes - OOB available: 16 bytes - ECC strength: 1 bits - ECC step size: 2048 bytes - bitflip threshold: 1 bits - 0x000000000000-0x000010000000 : "nand0" - 0x000000000000-0x000000400000 : "boot" - 0x000000400000-0x000000800000 : "env" - 0x000000800000-0x000004800000 : "kernel" - 0x000004800000-0x00000a800000 : "rootfs" Signed-off-by: Michal Simek <michal.simek@xilinx.com> Fixes: 0486497e2b5f ("lib: Improve _parse_integer_fixup_radix base 16 detection") Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Pali Rohár <pali@kernel.org>
2020-04-24mtd: nand: pxa3xx: fix raw read when last_chunk_size == 0Baruch Siach
Commit 6293b0361d9 ("mtd: nand: pxa3xx: add raw read support") added the local data_len variable in handle_data_pio() to track read size, but forgot to update the condition of drain_fifo() call. That happens to work when the layout last_chunk_size != 0. But when last_chunk_size == 0, drain_fifo() is not called to read the last chunk, which leads to "Wait timeout!!!" error. Fix this. Fixes: 6293b0361d9 ("mtd: nand: pxa3xx: add raw read support") Cc: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-04-24common/board_f: Make reserve_mmu genericOvidiu Panait
Introduce arch_reserve_mmu to allow for architecture-specific reserve_mmu routines. Also, define a weak nop stub for it. Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-28 14:56:57 +0000