summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-25clk: imx8: split code into common and soc specific partPeng Fan
To make it easy to add new clk driver for i.MX8, split the code into common part and SoC specific part. Make the get/set/enable non static and introduce a num_clks for soc_clk_dump, because the arrays are moved to clk-imx8qxp.c. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25imx8: add cpu supportPeng Fan
Add cpu type and Kconfig entry Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25arm: dts: introduce dtsi for i.MX8QMPeng Fan
Introduce basic dtsi for i.MX8QM, only support SDHC/FEC/LPUART. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definitionPeng Fan
Add i.MX8QM clocks definition Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25dt-bindings: pinctrl: add i.MX8QM pads definitionPeng Fan
Add i.MX8QM pads definition Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25pinctrl: imx8: add i.MX8QM compatiblePeng Fan
Add i.MX8QM compatible Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25boot.src: Provide dsa_core.blacklist bootarg when booting via NFSLukasz Majewski
This setup is a bit special as Linux kernel (4.19) is not supporting in-kernel NFS rootfs mount and Distributed Switch Architecture (DSA) operation. For that reason it was necessary to provide a bootarg to allow userspace enable it afterwards if needed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25Convert CONFIG_USB_EHCI_MX5 to KconfigLukasz Majewski
This converts the following to Kconfig: CONFIG_USB_EHCI_MX5 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: config: Remove not needed CONFIG_MXC_USB_PORT defineLukasz Majewski
After i.MX5's EHCI conversion to DM, the CONFIG_MXC_USB_PORT is not needed anymore and should be removed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boardsLukasz Majewski
This commit enables the DM_USB on HSC|DDC i.MX53 based boards. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25USB: DM: Convert i.MX5 ehci code to driver modelLukasz Majewski
This commit converts i.MX5's EHCI USB host driver to driver model (DM_USB). It is a straightforward conversion (to reuse as much code as possible), based on ehci-mx6.c code. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: Remove EHCI specific code from HSC|DDC board fileLukasz Majewski
As EHCI on i.MX5 has been converted to driver model, the board specific code, necessary for VBUS USB power supply setup is not needed anymore. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25DTS: Enable USB host support (including regulators) on HSC|DDC boardsLukasz Majewski
This commit enables the support for K&P's HSC|DDC imx53 based boards. It was also necessary to provide device tree description for regulators to avoid board specific code definition. The GPIO pin description responsible for VBUS control has been moved from "hog" group to usbh1 dedicated one. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25DTS: Provide USB host DTS description for i.MX53 devicesLukasz Majewski
This code has been ported from Linux kernel - tag v5.1-rc2. The difference from the kernel is the removal of: fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; properties, which are not needed for correct u-boot operation (as PHY setup is done in ehci-mx5.c file itself). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic fileLukasz Majewski
After unification of the rootfs for both HSC and DDC devices, only one, common wic file is necessary - without the distinction of specific board. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related filesLukasz Majewski
After switching to DM/DTS support of esdhc3 - the code in this patch can be removed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: defconfig: Move CONFIG_FSL_ESDHC to KconfigLukasz Majewski
The CONFIG_FSL_ESDHC is now enabled and defined in Kconfig, not in include/configs/kp_imx53.h Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: Enable CONFIG_DM_MMC and CONFIG_DM_BLK on HSC and DDC boardsLukasz Majewski
This commit enables DM_MMC and DM_BLK on imx53 based HSC and DDC boards. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25DTS: Add esdhc3 device tree description tuning for HSC|DDC boardsLukasz Majewski
In this commit the esdhc3 controller is enabled as well as it is remaped to mmc0 to not break legacy code. The pinctrl setup (e.g. 0x1e4) is the same as one from in-board file definition. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTSLukasz Majewski
After commit efd0b791069a ("eth: dm: fec: Add gpio phy reset binding") the in-board file definition of ETH PHY reset can be removed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25imx8qxp: mek: enable dm-spl for pmPeng Fan
with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled, the bind and probe code in board file could be removed. Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25ARM: omap3_logic: Enable UUIDAdam Ford
Instead of hardcoding the mmcroot to /dev/mmcblkX, use the UUID method. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-25ARM: imx6q_logic: Allow storing environment in FAT on eMMCAdam Ford
Some variations of the imx6q_logic board have eMMC instead of NAND. Rather than creating a separate defconfig, this patch adds the ability to read/write to eMMC (mmc 0:1) when NAND doesn't exist. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-25ARM: imx6q_logic: Allow optional arguments to cmd lineAdam Ford
This adds an extra, optional environmental variable called 'optargs' which if enabled allow additional parameters to be passed to the kernel (ie, quiet, cma=128M, etc.) Each script that setups the bootargs will just append this. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-25imx8: mek: move HUSH_PARSER to defconfigPeng Fan
Move HUSH_PARSER to defconfig, otherwise meet " => run netboot Booting from net ... Unknown command 'if' - try 'help' Unknown command 'then' - try 'help' Unknown command 'else' - try 'help' Unknown command 'fi' - try 'help' Unknown command '0x80280000' - try 'help' Unknown command 'if' - try 'help' Unknown command 'then' - try 'help' Unknown command 'then' - try 'help' Unknown command 'else' - try 'help' Unknown command 'fi' - try 'help' Unknown command 'else' - try 'help' Unknown command 'fi' - try 'help' " Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25imx8qxp: mek: Enable CMD_FUSEPeng Fan
Enable CMD_FUSE for i.MX8QXP MEK Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25imx8: fuse: add fuse driverPeng Fan
Add fuse write for i.MX8 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25imx: sip: add call_imx_sip_ret2Peng Fan
This function will be used by i.MX8 fuse driver. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-24Merge branch '2019-04-22-master-imports'Tom Rini
- Add and enable brcmnand driver on a number of relevant platforms. Also add and enable LED drivers on more bcm platforms. - Various ARMv8 fixes/improvements, including extending PSCI functionality. - fs_loader improvments - Various FIT/SPL improvements - PCI bugfixes - Poplar platform ethernet support - MediaTek MMC improvements - Android boot improvements
2019-04-24image: android: fix 'iminfo' typoEugeniu Rosca
Fix below CP warning triggered by the 'iminfo' output in another patch: WARNING: 'addrress' may be misspelled - perhaps 'address'? Fixes: 4f1318b29c7a20 ("common: image: minimal android image iminfo support") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2019-04-24image: android: allow booting lz4-compressed kernelsEugeniu Rosca
According to Android image format [1], kernel image resides at 1 page offset from the boot image address. Grab the magic number from there and allow U-Boot to handle LZ4-compressed KNL binaries instead of hardcoding compression type to IH_COMP_NONE. Other compression types, if needed, can be added later. Tested on H3ULCB-KF using the image detailed in [2]. [1] Excerpt from include/android_image.h +-----------------+ | boot header | 1 page +-----------------+ | kernel | n pages +-----------------+ | ramdisk | m pages +-----------------+ | second stage | o pages +-----------------+ [2] => iminfo 4c000000 ## Checking Image at 4c000000 ... Android image found kernel size: 85b9d1 kernel address: 48080000 ramdisk size: 54ddbc ramdisk addrress: 4a180000 second size: 0 second address: 48000800 tags address: 48000100 page size: 800 os_version: 1200012a (ver: 0.9.0, level: 2018.10) name: cmdline: buildvariant=userdebug Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-04-24test: env: Enable env unit tests by defaultHeinrich Schuchardt
If CONFIG_UNIT_TEST is enabled we should enable the individual tests by default to ensure good test coverage. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23ARMv8: PSCI: Fix PSCI_TABLE relocation issueLars Povlsen
This fixes relaction isses with the PSCI_TABLE entries in the psci_32_table and psci_64_table. When using 32-bit adress pointers relocation was not being applied to the tables, causing PSCI handlers to point to the un-relocated code area. By using 64-bit data relocation is properly applied. The handlers are thus in the "secure data" area, which is protected by /memreserve/ in the FDT. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-04-23bootm: Simplying cache flush codeTrent Piepho
The cache flush of the kernel load area needs to be aligned outward to the DMA cache alignment. The operations are simpler if we think of this as aligning the start down, ALIGN_DOWN(load, ARCH_DMA_MINALIGN), and aligning the end up, ALIGN(load_end, ARCH_DMA_MINALIGN), and then find the length of the flushed region by subtracting the former from the latter. Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23malloc: Fix memalign not honoring alignment prior to full malloc initAndreas Dannenberg
When using memalign() in a scenario where U-Boot is configured for full malloc support with simple malloc not explicitly enabled and before the full malloc support is initialized, a memory block is being allocated and returned without the alignment parameter getting honored. Fix this issue by replacing the existing memalign pre-full malloc init logic with a call to memalign_simple() this way ensuring proper alignment of the returned memory block. Fixes: ee038c58d519 ("malloc: Use malloc simple before malloc is fully initialized in memalign()") Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-23spl: spl_nand.c: Add NAND loading messageStefan Roese
This patch adds a short message to the SPL NAND loader, which displays the source and destinations addresses including the size of the loaded image, like this: U-Boot SPL 2019.04-rc3-00113-g486efd8aaf (Mar 15 2019 - 14:18:02 +0100) Trying to boot from NAND Loading U-Boot from 0x00040000 (size 0x000a0000) to 0x22900000 I find this message quite helpful - hopefully others do so as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-23ARM: MediaTek: Add support for MT8516 SoCFabien Parent
Add support for MediaTek MT8516 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-23pinctrl: add driver for MT8516Fabien Parent
Add Pinctrl driver for MediaTek MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2019-04-23clk: mediatek: add driver for MT8516Fabien Parent
Add clock driver for MediaTek MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> [trini: Redo whitespace] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-23clk: mediatek: add support for SETCLR_INV and NO_SETCLR flagsFabien Parent
Add the implementation for the CLK_GATE_SETCLR_INV and CLK_GATE_NO_SETCLR flags. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2019-04-23mmc: mtk-sd: fix configuration option checkFabien Parent
We either need to use IS_ENABLED(CONFIG_FOO) or CONFIG_IS_ENABLED(FOO). IS_ENABLE(FOO) will always return false. This commit fixes the comparison by using the CONFIG_IS_ENABLED(FOO) syntax. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-04-23mmc: mtk-sd: add support for MT8516Fabien Parent
Add config for handling MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2019-04-23mmc: mtk-sd: add source_cg clock supportFabien Parent
Some MediaTek SoC need an additional clock "source_cg". Enable this new clock. We reuse the same clock name as in the kernel. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2019-04-23poplar: enable Ethernet driver supportShawn Guo
The 'phy' reset of gmac device in kernel device tree is not generic enough for u-boot to use, so we need to overwrite the 'resets' property as needed. With this device tree fixup and poplar_defconfig changes, Ethernet starts working on Poplar board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23net: add higmacv300 Ethernet driver for HiSilicon platformShawn Guo
It adds the driver for HIGMACV300 Ethernet controller found on HiSilicon SoCs like Hi3798CV200. It's based on a downstream U-Boot driver, but quite a lot of code gets rewritten and cleaned up to adopt driver model and PHY API. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23reset: add reset driver for HiSilicon platformShawn Guo
It adds a Driver Model compatible reset driver for HiSlicon platform. The driver implements a custom .of_xlate function, and uses .data field as reset register offset and .id field as bit shift. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23reset: add polarity field into struct reset_ctlShawn Guo
Some reset controllers support different polarities for reset operation, so let's add a polarity field into struct reset_ctl. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKSThierry Reding
If a platform defines CONFIG_NR_DRAM_BANKS, each DRAM bank will be added as a PCI region. The number of MAX_PCI_REGIONS therefore needs to scale with the number of DRAM banks, otherwise we will end up with too little space in the hose->regions array to store all system memory regions. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23pci: Add boundary check for hose->regionsThierry Reding
Make sure that we don't overflow the hose->regions array, otherwise we would end up overwriting the hose->region_count field and cause mayhem to ensue. Also print an error message when we'd be overflowing because it indicates that there aren't enough regions available and the number needs to be increased. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23ARM: da850evm: Remove legacy MMC codeAdam Ford
With the migration to DM in SPL and the DT support, the old legacy code is no longer neaded, so this patch removes it Signed-off-by: Adam Ford <aford173@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-25 16:47:02 +0000