summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-04-04efi_loader: Fix network DP with DM_ETHAlexander Graf
When CONFIG_DM_ETH is set, we assemble the device path properly with a full device hierarchy. Our helper function dp_fill() even put the MAC node itself in it for us. However, for non-DM compatibility we also have code in that added the MAC node manually. That code now runs on top of the existing MAC node: Handle 0x3db2f6b0 /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ] /USBClass(0,0,9,0,0)/USBClass(424,9514,9,0,2)/MacAddr(b8:27:eb:e1:81:47,1) /MacAddr(b8:27:eb:e1:81:47,57)/EndEntire We obviously don't need the additional node and in fact, grub chokes on it and fails to match the DP against the ethernet device node. So this patch moves the additional MAC node into the non-DM code path: Handle 0x3db3fde0 /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ] /USBClass(0,0,9,0,0)/USBClass(424,9514,9,0,2)/MacAddr(b8:27:eb:e1:81:47,1) /EndEntire While at it, we also mark the non-DM MAC node as ethernet. Fixes: b66c60dde9d ("efi_loader: add device-path utils") Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: Fix return value for efi_add_runtime_mmioAlexander Graf
The efi_add_runtime_mmio function incorrectly returned the added address as return value rather than EFI_SUCCESS. Fix it by checking the return value of efi_add_memory_map properly. Fixes: f057cfef5dc ("efi_loader: exit status for efi_reset_system_init") Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: Optimize GOP moreAlexander Graf
The GOP path was optimized, but still not as fast as it should be. Let's push it even further by trimming the hot path into simple 32bit load/store operations for buf->vid 32bpp operations. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: Optimize GOP switchAlexander Graf
We usually try to compile for size, not for speed. Unfortunately with the more powerful GOP infrastructure to handle all sorts of GOP operations, we end up slowing down our copying hot path quite a lot. So this patch moves the 4 possible GOP operation modes into separate functions which call a common function again. The end result of that is more optimized code that can properly do constant propagation throughout its switch() statements and thus removes compares in the hot path. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: use __always_inline for pixel conversionHeinrich Schuchardt
We optimize for size using -Os so gcc might ignore 'inline'. Pixel conversions are called so often that we always want to inline them. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: RestoreTPL should execute queued eventsHeinrich Schuchardt
When the TPL is lowered queued events may become eligible for execution. iPXE uses the following pattern to request event execution: bs->RestoreTPL ( TPL_APPLICATION ); bs->RaiseTPL ( TPL_CALLBACK ); Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: use TPL_NOTIFY for network timer eventHeinrich Schuchardt
We use a timer to poll the network. iPXE is used for booting from iSCSI drives. It has been changed to run at TPL_CALLBACK most of the time (which is not what the UEFI spec recommends). By changing our timer to TPL_NOTIFY we can ensure that it is nevertheless executed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04git: mailrc: Add myself and efi to listAlexander Graf
I wasn't listed in the mailrc before, let's fix that. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: correctly support parameter delta in BltHeinrich Schuchardt
In the Blt service of the EFI_GRAPHICS_OUTPUT_PROTOCOL the parameter delta is measured in bytes and not in pixels. The coding only supports delta being a multiple of four. The UEFI specification does not explicitly require this but as pixels have a size of four bytes we should be able to assume four byte alignment. The corresponding unit test is corrected, too. It can be launched with setenv efi_selftest block image transfer bootefi selftest Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_selftest: unit test for event groupsHeinrich Schuchardt
Supply a unit test for event groups. Create multiple events in an event group. Signal each event once and check that all events are notified once in each round. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_selftest: fix device tree unit testHeinrich Schuchardt
Include libfdt.h was moved by commit b08c8c487083 ("libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>") Fixes: e236200c7fa6 ("efi_selftest: check installation of the device tree") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi: Correct header order in efi_memorySimon Glass
The headers are not in the correct order. Fix this. Also drop libfdt_env.h since it is not needed. Signed-off-by: Simon Glass <sjg@chromium.org> Rebased Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: use constants in efi_allocate_pages()Heinrich Schuchardt
Using the existing predefined constants is less error prone and makes the code easier to read. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: show UEFI revision in helloworldHeinrich Schuchardt
Output the UEFI revision number in helloworld. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_selftest: unit test for EFI_SIMPLE_TEXT_INPUT_PROTOCOLHeinrich Schuchardt
Provide a unit test for the EFI_SIMPLE_TEXT_INPUT_PROTOCOL. The unicode character and the scan code are printed for text input. To run the test: setenv efi_selftest text input bootefi selftest Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: add missing EFI_RESET_PLATFORM_SPECIFICHeinrich Schuchardt
EFI_RESET_PLATFORM_SPECIFIC is one of the values that can be used for the EFI service ResetSystem. The missing definition is added. The value has to handled in efi_reset_system(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_selftest: test gop bitbltHeinrich Schuchardt
The test checks all block image transfer operations of the graphical output protocol. An animated submarine is shown. To run the test: setenv efi_selftest bock image transfer bootefi selftest Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: implement missing bit blit operations in gopHeinrich Schuchardt
With the patch all block image transfer operations of the EFI_GRAPHICS_OUTPUT_PROTOCOL are supported. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: implement event groupsHeinrich Schuchardt
If an event of a group event is signaled all other events of the same group are signaled too. Function efi_signal_event is renamed to efi_queue_event. A new function efi_signal_event is introduced that checks if an event belongs to a group and than signals all events of the group. Event group notifciation is implemented for ExitBootServices, InstallConfigurationTable, and ResetSystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: define GUIDS for event groupsHeinrich Schuchardt
Event groups are used to signal multiple events at the same time. They are identified by GUIDs. This patch provided the predefined GUIDs of UEFI specification 2.7. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: manage events in a linked listHeinrich Schuchardt
Lift the limit on the number of events by using a linked list. This also allows to have events with type == 0. This patch is based on Rob's patch efi_loader: fix events https://lists.denx.de/pipermail/u-boot/2017-October/309348.html Suggested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: fix formatting errorsHeinrich Schuchardt
Fix formatting errors in efi_boottime.c indicated by scripts/checkpatch.py. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: clear signaled state in CheckEventHeinrich Schuchardt
CheckEvent must clear the signaled state. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: check parameter in InstallConfigurationTableHeinrich Schuchardt
Check that parameter guid is not NULL. This avoids a possible NULL pointer exception. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: correct input of special keysHeinrich Schuchardt
Don't set unicode_char if scan_code is set. Add support for page up, page down, and insert. Correct input of function keys. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_selftest: check installation of the device treeHeinrich Schuchardt
The unit test checks if a device tree is installed. It requires that the 'compatible' property of the root node exists. If available it prints the 'serial-number' property. The serial-number property is derived from the environment variable 'serial#'. This can be used to check if the image_setup_libfdt() function is executed. A Python test is supplied. It sets a value for serial# and checks that the selftest shows this as serial-number. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: support device tree for bootefi selftestHeinrich Schuchardt
The second argument of the bootefi command should always be usable to specify a device tree. This was missing for bootefi selftest and bootefi hello. Proper error handling is added. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: check initialization of EFI subsystem is successfulHeinrich Schuchardt
Up to now errors in the initialization of the EFI subsystems was not checked. If any initialization fails, leave the bootefi command. We do not retry initialization because this would require to undo all prior initalization steps. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: do_bootefi_exec should always return an EFI status codeHeinrich Schuchardt
The return type of do_bootefi_exec() is efi_status_t. So in case of an error we should always return an EFI status code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: efi_get_time_init should return status codeHeinrich Schuchardt
All EFI initialization functions should return a status code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: exit status for efi_reset_system_initHeinrich Schuchardt
efi_reset_system_init provides the architecture or board specific initialization of the EFI subsystem. Errors should be caught and signalled by a return code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: simplify calling efi_init_obj_listHeinrich Schuchardt
efi_init_obj_list() should be executed only once. Rather than having the caller check this variable and the callee set it, move all access to the variable inside the function. This reduces the logic needed to call efi_init_obj_list(). Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: consistently return efi_status_t efi_watchdog_registerHeinrich Schuchardt
efi_watchdog_register() should always return a status code and not a boolean value. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: return efi_status_t from efi_net_registerHeinrich Schuchardt
Consistently return status codes form efi_net_register(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: return efi_status_t from efi_gop_registerHeinrich Schuchardt
All initialization routines should return a status code instead of a boolean. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: Convert warnings to debug() prints] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: efi_smbios_register should have a return valueHeinrich Schuchardt
Errors may occur inside efi_smbios_register(). - Return a status code. - Remove unused variables. - Use constants where applicable. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: provide new doc/README.uefiHeinrich Schuchardt
Provides information about - usage of the bootefi command - overview of UEFI - interaction between U-Boot and EFI drivers Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Acked-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: delete doc/README.efiHeinrich Schuchardt
Delete README.efi. It is replaced by a further patch. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: Initial EFI_DEVICE_PATH_UTILITIES_PROTOCOLLeif Lindholm
Not complete, but enough for Shell.efi and SCT.efi. We'll implement the rest as needed or once we have SCT running properly so there is a way to validate the interface against the conformance test suite. Initial skeleton written by Leif, and then implementation by Rob. Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> [Fill initial skeleton] Signed-off-by: Rob Clark <robdclark@gmail.com> [Rebase on v2018.03-rc1] Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: remove deprecated ConsoleControlProtocolHeinrich Schuchardt
The console control protocol is not defined in the UEFI standard. It exists in EDK2's EdkCompatiblityPkg package. But this package is deprecated according to https://github.com/tianocore/tianocore.github.io/wiki/Differences-between-EDK-and-EDK-II Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: parameter checks for LoadImageHeinrich Schuchardt
Add parameter checks in efi_load_image(). Check memory allocation is successful in efi_load_image(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT"Andre Przywara
Now with the MMC environment gone, we have enough space to accommodate the Pine64 "non-plus" .dtb again. This reverts commit 47952b8e42c2790150e16d3d4235b3a1ee0ba9bb. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-04sunxi: revert disabling of featuresAndre Przywara
In January some commits were introduced to mitigate the U-Boot image size issues we encountered on sunxi builds. Now with the MMC environment removed we can bring them back, as we practically don't have a size limit anymore. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-04sunxi: disable direct MMC environmentAndre Przywara
Since the dawn of time for the Allwinner support in mainline U-Boot we store the environment to the SD card and write directly at 544KB from the beginning of the device. This leads to problems when the U-Boot proper image grows beyond 504KB and eventually overlaps. With one release of having the environment preferably in a FAT partition, let's now turn off the MMC variant fallback, so we get back all the space we need to implement features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-04-04net: sun8i-emac: remove support for old bindingAndre Przywara
The original DT binding used by U-Boot's sun8i-emac driver was not really agreed upon, and deviated from the "official" binding now used by the kernel. Since now all U-Boot users have been converted to the new binding, we can remove support for the old DT nodes from the driver. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-04arm: dts: sunxi: update H5 to new EMAC bindingAndre Przywara
The U-Boot driver for the sun8i-emac was using some preliminary DT binding. Now since Linux got its own driver in v4.15 and our driver can now cope with both bindings, let's convert the DT nodes used by the OrangePi PC2 over to the new bindings used by the kernel. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-04arm: dts: sunxi: update H3 to new EMAC bindingAndre Przywara
The U-Boot driver for the sun8i-emac was using some preliminary DT binding. Now since Linux got its own driver in v4.15 and our driver can now cope with both bindings, let's convert the DT nodes used by the various H3 boards over to the new bindings used by the kernel. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-04arm: dts: sunxi: update A64 to new EMAC bindingAndre Przywara
The U-Boot driver for the sun8i-emac was using some preliminary DT binding. Now since Linux got its own driver in v4.15 and our driver can now cope with both bindings, let's convert the DT nodes used for the Pine64+ board over to the new bindings used by the kernel. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-04net: sun8i-emac: add support for new EMAC DT bindingAndre Przywara
The Ethernet MAC used in newer Allwinner SoCs (H3, A64, H5) got an upstream Linux driver in v4.15. This one uses a slightly different binding from the original one used by the U-Boot driver. The differences to the old binding are: - The "syscon" address is held in a separate node, referenced via a phandle in the "syscon" property. - The reference to the PHY is held in a property called "phy-handle", not "phy". - The PHY register is at offset 0x30 in the syscon device, not at 0. - The internal PHY is activated when the node, which phy-handle points to, is a child node of an "allwinner,sun8i-h3-mdio-internal" node. Teach the U-Boot driver how to find its resources in a "new-style" DT, so that we can use a Linux kernel compatible DT for U-Boot as well. This keeps support for the old binding for now, to allow a smooth transition. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-04net: sun8i-emac: support new pinctrl DT bindingsAndre Przywara
The Linux kernel driver for the Allwinner pin controller gained support for generic properties, which are now also used in the DTs. The sun8i-emac Ethernet driver for new Allwinner MACs reads the pins from the DT, but so far only supported the old binding. Update the parsing routine to cope with both the old and new bindings, so that the newer DTs can be used with U-Boot and its Ethernet driver. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
generated by cgit (git 2.34.1) at 2025-01-07 19:07:55 +0000