uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2019-02-15	imx: ventana: add support for GW5901/GW5902	Tim Harvey
2019-02-15	imx: ventana: add support for GW5909	Tim Harvey
2019-02-15	imx: ventana: add support for GW5908	Tim Harvey
2019-02-15	imx: ventana: add support for GW5907	Tim Harvey
2019-02-15	imx: ventana: add support for GW5906	Tim Harvey
2019-02-15	imx: ventana: add i2c detect for all LVDS displays	Tim Harvey
2019-02-15	imx: ventana: skip nand init for nandless boards	Tim Harvey
2019-02-15	imx: ventana: add support for Z101WX01 LVDS display	Tim Harvey
2019-02-15	imx: ventana: add support for GW5905	Tim Harvey
2019-02-15	imx: ventana: remove setup of I2C3 from SPL	Tim Harvey
2019-02-15	imx: ventana: do not iomux UART1	Tim Harvey
2019-02-15	imx: ventana: mv88e61xx change LED configuration	Tim Harvey
2019-02-15	configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support	Abel Vesa
2019-02-15	board: mx6sabresd: Remove the enet reset gpio handling	Abel Vesa
2019-02-15	board: mx6sabresd: Remove non-DM code	Abel Vesa
2019-02-15	configs: mx6sabresd: Add DM_SPI_FLASH necessary configs	Abel Vesa
2019-02-15	board: mx6sabreauto: Remove the non-DM code	Abel Vesa
2019-02-15	configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs	Abel Vesa
2019-02-15	mx6sabreauto: Add DM_GPIO support	Abel Vesa
2019-02-15	mx6sabresd: Add DM_GPIO support	Abel Vesa
2019-02-15	configs: mx6sabresd: Add SPL FIT and DM support	Abel Vesa
2019-02-15	configs: mx6sabreauto: Add SPL FIT and DM support	Abel Vesa
2019-02-15	arm: dts: Update all the dts[i] files for imx6[q\|qp\|dl] sabre[auto\|sd]	Abel Vesa
2019-02-15	arm: dts: Add all the imx6[q\|qp\|dl] sabre[auto\|sd] u-boot dts[i] files	Abel Vesa
2019-02-15	board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL	Abel Vesa
2019-02-15	board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL	Abel Vesa
2019-02-15	mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds	Abel Vesa
2019-02-15	configs: imx6sabreauto: Add DM_USB support	Abel Vesa
2019-02-15	configs: imx6sabreauto: Add DM_MMC support	Abel Vesa
2019-02-15	usb: ehci-mx6: Make regulator DM_REGULATOR dependent	Abel Vesa
2019-02-15	usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE	Abel Vesa
2019-02-15	net: mv88e61xx: fix autonegotiation on ports	Tim Harvey
2019-02-15	doc: imx: habv4: Remove secure_boot.txt guide	Breno Matheus Lima
2019-02-15	doc: imx: habv4: Move encrypted boot guide	Breno Matheus Lima
2019-02-15	doc: imx: habv4: Add Secure Boot guide for i.MX6 and i.MX7 SPL targets	Breno Matheus Lima
2019-02-15	doc: imx: habv4: Add Secure Boot guide for i.MX6 and i.MX7 non-SPL targets	Breno Matheus Lima
2019-02-15	doc: imx: habv4: Add HABv4 introduction	Breno Matheus Lima
2019-02-15	doc: imx: habv4: Remove extra hab directory for a cleaner documentation struc...	Breno Matheus Lima
2019-02-15	ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard	Marcin Niestroj
2019-02-15	MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL	Adam Ford
2019-02-15	net: dm: fec: Fix regulator enable when using DM_REGULATOR	Adam Ford
2019-02-15	ARM: imx6q_logic: Correct phy fixup for broken ethernet	Adam Ford
2019-02-15	ARM: imx6q_logic: Enable SPL Booting from NAND	Adam Ford
2019-02-15	MTD: NAND: mxs_nand_init_dma: Make mxs_nand_init_dma static	Adam Ford
2019-02-15	MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC	Adam Ford
2019-02-15	ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code	Lukasz Majewski
2019-02-15	ddr: vybrid: Provide code to perform on-boot calibration	Lukasz Majewski
2019-02-15	ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ)	Lukasz Majewski
2019-02-13	Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot	Tom Rini
2019-02-13	efi_loader: fix EFI_FILE_PROTOCOL.GetInfo()	Heinrich Schuchardt