summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-01rtc: m41t62: add compatible for m41st87Marek Vasut
This adds a compatible string for m41st87. This ensures that this driver can be used for m41st87. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-03-01gadget: f_thor: add missing line breaks for pr_err()Seung-Woo Kim
After the commit 9b643e312d52 ("treewide: replace with error() with pr_err()"), there are pr_err() usages without line break. Add missing line breaks for pr_err() used in f_thor. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2020-03-01dfu: Reset timeout in case of DFU requestAndy Shevchenko
In case dfu command is being executed with timeout option, the timer may expire in the middle of DFU operation. If there is DFU request coming, we may simple reset timeout value to prevent aborting of ongoing DFU operation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Ferry Toth <ftoth@exalondelft.nl>
2020-03-01ARM: rmobile: Limit bootloader size to 1 MiB on R-Car Gen3Marek Vasut
The HF/QSPI flash layout permits up to 1 MiB large bootloader blob, set CONFIG_BOARD_SIZE_LIMIT to enforce this limit and set the monitor size to match accordingly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-02-29Merge tag 'efi-2020-04-rc4-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc4 (2) In Linux next-20200228 patches have been merged to load an initial ramdisk using an EFI_LOAD_FILE2_PROTOCOL provided by the firmware. See commit ec93fc371f01 ("efi/libstub: Add support for loading the initrd from a device path"). The idea behind it is that the firmware should be responsible for validating the initrd in a secure boot setup. This pull-request comprises a patch series which let's U-Boot provide an initial implementation of the EFI_LOAD_FILE2_PROTOCOL providing the initrd.
2020-02-29Merge tag 'uniphier-v2020.04-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2020.04 (3rd) - Enable ADMA and HS400 for the eMMC driver on 64-bit SoCs - Add some convenient environment variables to handle SD card - Sanitize the NAND controller reset sequence and its WP handling - Sync DT with Linux
2020-02-29ARM: dts: uniphier: remove U-Boot own EEPROM compatible and propertyMasahiro Yamada
The compatible string "i2c-eeprom" is U-Boot own compatible, which has never been approved by the DT community. "u-boot,i2c-offset-len" is also a U-Boot own hack. Linux adds "atmel,*" as generic compatibles, and U-Boot also followed it by commit d7e28918aa3f ("i2c_eeprom: Add reading support"). The U-Boot own hack is no longer needed. Just sync with Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29ARM: dts: uniphier: add reset-names to NAND controller nodeMasahiro Yamada
Import Linux commits: 37f3e0096f71 ("ARM: dts: uniphier: add reset-names to NAND controller node") e98d5023fe1f ("arm64: dts: uniphier: add reset-names to NAND controller node") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29ARM: dts: uniphier: rename DT nodes to follow json-schemaMasahiro Yamada
Import the nodename changes I made in Linux for avoiding dt-schama warnings. This follows the $nodename patterns in the dt-schema. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28doc/efi: add load file 2 protocol to HTML documentationHeinrich Schuchardt
The load file 2 protocol can be used by the Linux kernel to load the initial RAM disk. U-Boot can be configured to provide an implementation. Add a description to the UEFI overview and document the related functions in the API section. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-28efi_selftest: add selftests for loadfile2 used to load initramfsIlias Apalodimas
Provide a unit test loading an initial ramdisk using the EFI_LOAD_FILE2_PROTOCOL. The test is only executed on request. An example usage - given a file image with a file system in partition 1 holding file initrd - is: * Configure the sandbox with CONFIG_EFI_SELFTEST=y CONFIG_EFI_LOAD_FILE2_INITRD=y CONFIG_EFI_INITRD_FILESPEC="host 0:1 initrd" * Run ./u-boot and execute host bind 0 image setenv efi_selftest load initrd bootefi selftest This would provide a test output like: Testing EFI API implementation Selected test: 'load initrd' Setting up 'load initrd' Setting up 'load initrd' succeeded Executing 'load initrd' Loaded 12378613 bytes CRC32 2997478465 Executing 'load initrd' succeeded Now the size and CRC32 can be compared to the provided file. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-28efi_loader: Implement FileLoad2 for initramfs loadingIlias Apalodimas
Following kernel's proposal for an arch-agnostic initrd loading mechanism [1] let's implement the U-boot counterpart. This new approach has a number of advantages compared to what we did up to now. The file is loaded into memory only when requested limiting the area of TOCTOU attacks. Users will be allowed to place the initramfs file on any u-boot accessible partition instead of just the ESP one. Finally this is an attempt of a generic interface across architectures in the linux kernel so it makes sense to support that. The file location is intentionally only supported as a config option argument(CONFIG_EFI_INITRD_FILESPEC), in an effort to enhance security. Although U-boot is not responsible for verifying the integrity of the initramfs, we can enhance the offered security by only accepting a built-in option, which will be naturally verified by UEFI Secure Boot. This can easily change in the future if needed and configure that via ENV or UEFI variable. [1] https://lore.kernel.org/linux-efi/20200207202637.GA3464906@rani.riverdale.lan/T/#m4a25eb33112fab7a22faa0fd65d4d663209af32f Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-28Merge branch '2020-02-28-mpc8xx-fixes'Tom Rini
- Fix the watchdog on mpc8xx platforms
2020-02-28watchdog: Don't select CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG at the same timeChristophe Leroy
Commit 06985289d452 ("watchdog: Implement generic watchdog_reset() version") introduced an automatic selection of CONFIG_WATCHDOG by CONFIG_WDT. But for boards selecting CONFIG_HW_WATCHDOG, like boards have a powerpc 8xx, CONFIG_WATCHDOG shall not be selected as they are mutually exclusive. Make CONFIG_WATCHDOG dependent on !CONFIG_HW_WATCHDOG Fixes: 06985289d452 ("watchdog: Implement generic watchdog_reset() version") Cc: Stefan Roese <sr@denx.de> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-28watchdog: mpc8xx: Revert the 8xx watchdog back to CONFIG_HW_WATCHDOGChristophe Leroy
Commit f3729ba6e7b2 ("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") switched the watchdog to CONFIG_WATCHDOG. But this is not compatible with the 8xx because it starts the watchdog HW timer at reset and must be serviced from the very beginning including while U-boot is executed in the firmware before relocation in RAM. Select CONFIG_HW_WATCHDOG and make hw_watchdog_reset() visible. Meanwhile, finalise the cleanup of arch/powerpc/cpu/mpc8xx/Kconfig by removing the lines put in comment in that commit, and also remove again the selection of CONFIG_MPC8xx_WATCHDOG which was removed by that commit and brought back by mistake by commit b3134ffbd944 ("watchdog: Kconfig: Sort entry alphabetically") Note that there was an 'imply WATCHDOG' in the original commit but it disappeared in the Kconfig alphabetical sorting, so no need to remove it here. Fixes: f3729ba6e7b2 ("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") Fixes: b3134ffbd944 ("watchdog: Kconfig: Sort entry alphabetically") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Roese <sr@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-28ARM: zynq: Remove single comment about QSPIMichal Simek
Very likely configs have been moved to Kconfig by scripts and this just remains there that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28ARM: zynq: Rename defconfig to be align with ZynqMP and VersalMichal Simek
Just cosmetic change before real switch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28arm: xilinx: Fill DEVICE_TREE directly in MakefilesMichal Simek
DEVICE_TREE variable is not exported from dts/Makefile that's why it is necessary to setup directly before use. Fixes: 312f2c5b14fa ("arm: xilinx: Use device tree which can be passed on cmd line") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28net: zynq: Free allocated buffers in case of errorMichal Simek
Driver probe function is called again and again in case of error. Malloc space is getting full which is is reported by: Insufficient RAM for page table: 0x15000 > 0x14000. Please increase the size in get_page_table_size() ### ERROR ### Please RESET the board ### The patch is freeing allocated buffers on error path to avoid panic. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28net: phy: dp83867: Clean force link good bitMichal Simek
On Xilinx ZynqMP revA board initial value of PHYCR register is 0x5448 which means FORCE_LINK_GOOD is already setup. Origin code was doing write but the new code is doing read/modify/write and keep this bit untouched. That's why ethernet stop to work. The patch is cleaning this bit when PHYCR value is composed. Tested on Xilinx zcu102-revA and zcu104-rev1.0 boards. Fixes: 37d6265f2bfa ("net: phy: dp83867: refactor rgmii configuration") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2020-02-28mtd: nand: Fix on-die ecc issues in arasan_nfc driverT Karthik Reddy
Fixed wrong enumeration of nand_config structure. Added chip select function before reading the nand chip for maf/dev id's, without this unable to access id's from some of the micron chips. Also added a print statement to identify if a nand flash is using on-die ecc. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28versal: drivers: clk: Fix invalid clock name queriesRajan Vaja
The clock driver makes EEMI call to get the name of invalid clk when executing versal_get_clock_info() function. This results in error messages. Added check for validating clock before saving clock attribute and calling versal_pm_clock_get_name() in versal_get_clock_info() function. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28arm: zynq: zybo z7: fix SPL uart init bitrateMilan Obuch
The board uses 100 MHz clock for UART bitrate generator, but is configured as 50 MHz on defconfig. This produces wrong console output. The first message, "Debug uart enabled" is received as: "������b" Fix the issue by configuring the correct clock for the UART baudrate generator Signed-off-by: Milan Obuch <u-boot@dino.sk> Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28arm: zynq: zybo z7: fix MIO init issueMilan Obuch
The board has two push button connected to MIO pins 50 and 51, which have a pull-down resistor and are connected to 1.8V when pressed. These two pins are wrongly initialized with internal pull-up enabled so they are reported as 1 all the time with no change when pressed. Disable the internal pull-up to fix the issue. Signed-off-by: Milan Obuch <u-boot@dino.sk> Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28net: zynq_gem: Use ulong instead of u32 data typeT Karthik Reddy
flush_dcache_range() expects unsigned long in the arguments. Here u32 variable is unable to hold the higher address value when ddr mapped to higher addresses & flushing lower address dchache range instead which is unmapped causing to crash. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28ARM: uniphier: enable CONFIG_MMC_HS400_SUPPORT for uniphier_v8_defconfigMasahiro Yamada
The eMMC controller on LD20 or later supports HS-400 mode. It works on a quick test. Enable it in case somebody may want to use it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: detect the base of micro support card at run-timeMasahiro Yamada
The base address 0x43f00000 is no longer true for the future SoC. Extract the base address from the device tree. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: remove workaround for the NAND write protectMasahiro Yamada
This workaround was previously needed for LD4, Pro4, sLD8, Pro5 SoCs. The boot ROM does not touch this register for PXs2/LD6b or later. Now that the reset signal of the Denali NAND controller is always asserted in board_init() then deasserted in the driver, the WRITE_PROTECT register gets back to the default value, which means the write protect is deasserted. This workaround can go away entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: move NAND reset assertion to U-Boot proper from SPLMasahiro Yamada
The comment /* deassert reset */ is wrong. It asserts the reset. It no longer needs to stay in SPL. The NAND controller reset is handled in the driver. So, this assert can be moved to the board_init() of U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: add sdscript, sdboot, sdupdate environment variablesMasahiro Yamada
Add handy macros: - sdscript: source boot.scr in the file system of the SD media - sdboot : boot the kernel using the images in the file system of the SD media - sdscript: update the boot firmware in the SD media (in raw block sectors) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: enable CONFIG_MMC_SDHCI_ADMA for uniphier_v8_defconfigMasahiro Yamada
Switch over to ADMA from SDMA. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-27Merge tag 'ti-v2020.04-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Minor fix in AVS class 0 driver - DHCP fixes in Keystone2 HS platforms.
2020-02-26Merge tag 'efi-2020-04-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc4 UEFI spec 2.8 errata A replaces the RuntimeServicesSupported variable defined in UEFI spec 2.8 by the configuration table EFI_RT_PROPERTIES_TABLE. So let's follow suit.
2020-02-26efi_loader: implement EFI_RT_PROPERTIES_TABLEHeinrich Schuchardt
UEFI spec 2.8 errata A replaces the RuntimeServicesSupported variable defined in UEFI spec 2.8 by the configuration table EFI_RT_PROPERTIES_TABLE. So let's follow suit. Cc: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Ard Biesheuvel <ardb@kernel.org>
2020-02-26defconfig: k2x_hs: Remove DTB_RESELECT to fix DHCP issueMadan Srinivas
This fixes the inadvertent definition of CONFIG_DTB_RESELECT and CONFIG_MULTI_DTB_FIT in the K2x HS defconfigs, that happened as part of a resync of the defconfigs. The inclusion of these config options causes ethernet to stop working on K2x HS devices as they interfere with the installation of the secure boot monitor. This patch also removes the above configs for the K2 GP devices, as they are not needed, and to keep the differences between the GP and HS defconfigs to a minimum. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com>
2020-02-26misc: k3_avs: Fix possible NULL pointer deferenceVignesh Raghavendra
Its possible that k3_avs_priv is NULL because the driver may not have been probed yet. Therefore check if pointer is valid before dereferencing it. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-26Prepare v2020.04-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- Update Sata node for T2080QDS and revert SATA related unrequired patches.
2020-02-25Merge branch '2020-02-25-master-imports'Tom Rini
- Assorted fixes
2020-02-25board: novtech: meerkat96: use correct mmc driverCarl Gelfand
When the board was originally submitted, it was attempting to use the ESDHC driver. The board uses the USDHC driver. Signed-off-by: Carl Gelfand <carl@novtech.com> Cc: Shawn Guo <shawn.guo@kernel.org> (maintainer:MEERKAT96 BOARD) Acked-by: Shawn Guo <shawnguo@kernel.org>
2020-02-25moveconfig: convert ps.stderr to stringMarkus Klotzbuecher
Printing the error message in verbose mode fails, since python3 doesn't implicitely convert bytes to strings. Signed-off-by: Markus Klotzbuecher <mk@mkio.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-25moveconfig: replace unsafe eval with astevalMarkus Klotzbuecher
Commit b237d358b425 ("moveconfig: expand simple expressions") added support for expanding expressions in configs, but used the unsafe python built-in "eval". This patch fixes this by replacing eval with the asteval module. Signed-off-by: Markus Klotzbuecher <mk@mkio.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-25MAINTAINERS: set maintainer for doc/api/efi.rstHeinrich Schuchardt
doc/api/efi.rst belongs to the UEFI sub-system documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-25arch: arm: Fix SZ_64K undeclared compilation errorWasim Khan
Macro SZ_64K is undeclared. Include sizes.h to fix the compilation error. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-02-25tools: image-host.c: remove uboot_aes.hPhilippe Reynes
The include uboot_aes.h is not useful and it breaks the compilation on android, so we remove it. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reported-by: Praneeth Bajjuri <praneeth@ti.com>
2020-02-25Merge branch '2020-02-24-ci-htmldocs'Tom Rini
- Update our CI loops to run 'make htmldocs' and stop on errors
2020-02-25doc/Makefile: turn warnings into errorsHeinrich Schuchardt
Several patches delivered incorrect restructured text as documentation. We should be able to discover this in Travis CI, Gitlab CI, or Azure CI. So let us turn all build warnings into errors. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-25azure: build HTML documentationHeinrich Schuchardt
Several patches delivered incorrect restructured text as documentation. We should be able to discover this in Azure CI. Provide a build step for 'make htmldocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-25gitlab: build HTML documentationHeinrich Schuchardt
Several patches delivered incorrect restructured text as documentation. We should be able to discover this in Gitlab CI. Provide a build step for 'make htmldocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2025-02-05 08:47:39 +0000