summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-28arm: zynq: zybo z7: fix SPL uart init bitrateMilan Obuch
The board uses 100 MHz clock for UART bitrate generator, but is configured as 50 MHz on defconfig. This produces wrong console output. The first message, "Debug uart enabled" is received as: "������b" Fix the issue by configuring the correct clock for the UART baudrate generator Signed-off-by: Milan Obuch <u-boot@dino.sk> Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28arm: zynq: zybo z7: fix MIO init issueMilan Obuch
The board has two push button connected to MIO pins 50 and 51, which have a pull-down resistor and are connected to 1.8V when pressed. These two pins are wrongly initialized with internal pull-up enabled so they are reported as 1 all the time with no change when pressed. Disable the internal pull-up to fix the issue. Signed-off-by: Milan Obuch <u-boot@dino.sk> Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28net: zynq_gem: Use ulong instead of u32 data typeT Karthik Reddy
flush_dcache_range() expects unsigned long in the arguments. Here u32 variable is unable to hold the higher address value when ddr mapped to higher addresses & flushing lower address dchache range instead which is unmapped causing to crash. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28ARM: uniphier: enable CONFIG_MMC_HS400_SUPPORT for uniphier_v8_defconfigMasahiro Yamada
The eMMC controller on LD20 or later supports HS-400 mode. It works on a quick test. Enable it in case somebody may want to use it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: detect the base of micro support card at run-timeMasahiro Yamada
The base address 0x43f00000 is no longer true for the future SoC. Extract the base address from the device tree. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: remove workaround for the NAND write protectMasahiro Yamada
This workaround was previously needed for LD4, Pro4, sLD8, Pro5 SoCs. The boot ROM does not touch this register for PXs2/LD6b or later. Now that the reset signal of the Denali NAND controller is always asserted in board_init() then deasserted in the driver, the WRITE_PROTECT register gets back to the default value, which means the write protect is deasserted. This workaround can go away entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: move NAND reset assertion to U-Boot proper from SPLMasahiro Yamada
The comment /* deassert reset */ is wrong. It asserts the reset. It no longer needs to stay in SPL. The NAND controller reset is handled in the driver. So, this assert can be moved to the board_init() of U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: add sdscript, sdboot, sdupdate environment variablesMasahiro Yamada
Add handy macros: - sdscript: source boot.scr in the file system of the SD media - sdboot : boot the kernel using the images in the file system of the SD media - sdscript: update the boot firmware in the SD media (in raw block sectors) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: enable CONFIG_MMC_SDHCI_ADMA for uniphier_v8_defconfigMasahiro Yamada
Switch over to ADMA from SDMA. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-27Merge tag 'ti-v2020.04-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Minor fix in AVS class 0 driver - DHCP fixes in Keystone2 HS platforms.
2020-02-26Merge tag 'efi-2020-04-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc4 UEFI spec 2.8 errata A replaces the RuntimeServicesSupported variable defined in UEFI spec 2.8 by the configuration table EFI_RT_PROPERTIES_TABLE. So let's follow suit.
2020-02-26efi_loader: implement EFI_RT_PROPERTIES_TABLEHeinrich Schuchardt
UEFI spec 2.8 errata A replaces the RuntimeServicesSupported variable defined in UEFI spec 2.8 by the configuration table EFI_RT_PROPERTIES_TABLE. So let's follow suit. Cc: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Ard Biesheuvel <ardb@kernel.org>
2020-02-26defconfig: k2x_hs: Remove DTB_RESELECT to fix DHCP issueMadan Srinivas
This fixes the inadvertent definition of CONFIG_DTB_RESELECT and CONFIG_MULTI_DTB_FIT in the K2x HS defconfigs, that happened as part of a resync of the defconfigs. The inclusion of these config options causes ethernet to stop working on K2x HS devices as they interfere with the installation of the secure boot monitor. This patch also removes the above configs for the K2 GP devices, as they are not needed, and to keep the differences between the GP and HS defconfigs to a minimum. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com>
2020-02-26misc: k3_avs: Fix possible NULL pointer deferenceVignesh Raghavendra
Its possible that k3_avs_priv is NULL because the driver may not have been probed yet. Therefore check if pointer is valid before dereferencing it. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-26Prepare v2020.04-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- Update Sata node for T2080QDS and revert SATA related unrequired patches.
2020-02-25Merge branch '2020-02-25-master-imports'Tom Rini
- Assorted fixes
2020-02-25board: novtech: meerkat96: use correct mmc driverCarl Gelfand
When the board was originally submitted, it was attempting to use the ESDHC driver. The board uses the USDHC driver. Signed-off-by: Carl Gelfand <carl@novtech.com> Cc: Shawn Guo <shawn.guo@kernel.org> (maintainer:MEERKAT96 BOARD) Acked-by: Shawn Guo <shawnguo@kernel.org>
2020-02-25moveconfig: convert ps.stderr to stringMarkus Klotzbuecher
Printing the error message in verbose mode fails, since python3 doesn't implicitely convert bytes to strings. Signed-off-by: Markus Klotzbuecher <mk@mkio.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-25moveconfig: replace unsafe eval with astevalMarkus Klotzbuecher
Commit b237d358b425 ("moveconfig: expand simple expressions") added support for expanding expressions in configs, but used the unsafe python built-in "eval". This patch fixes this by replacing eval with the asteval module. Signed-off-by: Markus Klotzbuecher <mk@mkio.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-25MAINTAINERS: set maintainer for doc/api/efi.rstHeinrich Schuchardt
doc/api/efi.rst belongs to the UEFI sub-system documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-25arch: arm: Fix SZ_64K undeclared compilation errorWasim Khan
Macro SZ_64K is undeclared. Include sizes.h to fix the compilation error. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-02-25tools: image-host.c: remove uboot_aes.hPhilippe Reynes
The include uboot_aes.h is not useful and it breaks the compilation on android, so we remove it. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reported-by: Praneeth Bajjuri <praneeth@ti.com>
2020-02-25Merge branch '2020-02-24-ci-htmldocs'Tom Rini
- Update our CI loops to run 'make htmldocs' and stop on errors
2020-02-25doc/Makefile: turn warnings into errorsHeinrich Schuchardt
Several patches delivered incorrect restructured text as documentation. We should be able to discover this in Travis CI, Gitlab CI, or Azure CI. So let us turn all build warnings into errors. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-25azure: build HTML documentationHeinrich Schuchardt
Several patches delivered incorrect restructured text as documentation. We should be able to discover this in Azure CI. Provide a build step for 'make htmldocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-25gitlab: build HTML documentationHeinrich Schuchardt
Several patches delivered incorrect restructured text as documentation. We should be able to discover this in Gitlab CI. Provide a build step for 'make htmldocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-25travis: build HTML docsHeinrich Schuchardt
Several patches delivered incorrect restructured text as documentation. We should be able to discover this in Travis CI. Provide a build step for 'make htmldocs'. Add required package graphviz. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-25travis: Add python3-sphinx to the package listTom Rini
In order to build htmldocs we need sphinx-build which comes from python3-sphinx. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-25arch: powerpc: Rewrite the sata node to fit the driverPeng Ma
The sata of our powerpc platforms are updated. These changes is to fit the driver probe. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-25Revert "configs: enable sata device module in T2080QDS"Peng Ma
This reverts commit 02dc1599ba0b16eb21ba0c206e5b6f38fe7b67a7 Commit 02dc1599ba0b ("configs: enable sata, eSDHC, USB device module in T2080QDS") has some sata defconfig changes to fit support DM mode, Now the driver will be reverted, So revert it. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-25Revert "powerpc: mpc85xx: delete FSL_SATA for T2080QDS board."Peng Ma
This reverts commit 856b9cdb53f0e6c8d98f81cf71ef363c16b0aa0e. Commit 856b9cdb53f0 ("powerpc: mpc85xx: delete FSL_SATA for T2080QDS board.") is to fit support sata DM mode, Now the driver will be reverted, So revert it. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-25Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"Peng Ma
This reverts commit 1ee494291880fd51ef0c5f7342e072bdb069d7ff. Commit 1ee494291880 ("ata: fsl_ahci: Add sata DM support for Freescale powerpc socs") introduced SCSI layer to call AHCI private API in order to support sata operations, In DM mode, This is not necessary for non-AHCI sata. So revert it and have already updated the driver itself to operate sata directly. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-24doc: update doc/sphinx/kerneldoc.pyHeinrich Schuchardt
Update doc/sphinx/kerneldoc.py from Linux next-20200219 to avoid warnings like: doc/sphinx/kerneldoc.py:125: RemovedInSphinx20Warning: AutodocReporter is now deprecated. Use sphinx.util.docutils.switch_source_input() instead. self.state.memo.reporter = AutodocReporter(result, self.state.memo.reporter) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-24Azure / GitLab: Update Docker imageTom Rini
Bring in a newer Docker image to build on that has everything required for running 'make htmldocs'. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-20Merge tag 'u-boot-rockchip-20200220' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399: split roc-pc-rk3399 out of evb_rk3399 - sync dts from upstream kernel for rk3399,rk3288,px30 - boot_mode: find the saradc device name
2020-02-20Merge tag 'mmc-2-20-2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- sdhci: code clean-up and fix cache coherency problem - enable cache snooping on mpc830x - Fix build error when MMC_WRITE disabled
2020-02-20mmc: sdhci: fix missing cache invalidation after reading by DMAMasahiro Yamada
This driver currently performs cache operation before the DMA start, but does nothing after the DMA completion. When reading data by DMA, the cache invalidation is needed also after finishing the DMA transfer. Otherwise, the CPU might read data from the cache instead of from the main memory when speculative memory read or memory prefetch occurs. Instead of calling the cache operation directly, this commit adds dma_unmap_single(), which performs cache invalidation internally, but drivers do not need which operation is being run. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-20mmc: sdhci: use dma_map_single() instead of flush_cache() before DMAMasahiro Yamada
Currently, sdhci_prepare_dma() calls flush_cache() regardless of the DMA direction. Actually, cache invalidation is enough when reading data from the device. This is correctly handled by dma_map_single(), which mimics the DMA-API in Linux kernel. Drivers can be agnostic which cache operation occurs behind the scene. This commit also sanitizes the difference between the virtual address and the dma address. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-20mmc: add mmc_get_dma_dir() helperMasahiro Yamada
Copied from Linux kernel. include/linux/mmc/host.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20mmc: sdhci: remove unneeded castsMasahiro Yamada
host->mmc is already (struct mmc *). memalign() returns an opaque pointer, so there is no need for casting. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20mmc: sdhci: use lower_32_bit2() and upper_32_bits() for setting adma_addrMasahiro Yamada
Use {lower,upper}_32_bits() instead of the combination of cast and shift. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20mmc: sdhci: reduce code duplication for aligned bufferMasahiro Yamada
The same code is run for both SDHCI_QUIRK_32BIT_DMA_ADDR and define(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER). Unify the code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20mmc: sdhci: put the aligned buffer pointer to struct sdhci_hostMasahiro Yamada
Using the global variable does not look nice. Add a new field sthci::align_buffer to point to the bounce buffer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20dma-mapping: add <asm/dma-mapping.h> for all architecturesMasahiro Yamada
To avoid "asm/dma-mapping.h: No such file or directory" error, we need something. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-20arch: arm: rockchip: order the rk3399 entries alphabeticallyPeter Robinson
Put the target entries for rk3399 devices in alphabetical order. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-20rockchip: rk3399: add target type for evb based boardKever Yang
There are many boards share the board file and device header file with rk3399 evb, add target type MACRO so that it is fixed instead of default to the first target in "RK3399 board select". Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19Merge tag 'efi-2020-04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc3 * Update the Kconfig description of CONFIG_EFI_RNG_PROTOCOL * Fix a function comment resolving a warning in 'make htmldocs'
2020-02-19dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>Masahiro Yamada
The implementation of dma_map_single() and dma_unmap_single() is exactly the same for all the architectures that support them. Factor them out to <linux/dma-mapping.h>, and make all drivers to include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>. If we need to differentiate them for some architectures, we can move the generic definitions to <asm-generic/dma-mapping.h>. Add some comments to the helpers. The concept is quite similar to the DMA-API of Linux kernel. Drivers are agnostic about what is going on behind the scene. Just call dma_map_single() before the DMA, and dma_unmap_single() after it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19dma-mapping: fix the prototype of dma_unmap_single()Masahiro Yamada
dma_unmap_single() takes the dma address, not virtual address. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit (git 2.34.1) at 2024-12-28 22:45:40 +0000