summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-05-21mips: ath79: add AP143 reference boardWills Wang
This patch add board-level code and base DT for AP143. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21mips: ath79: add AP121 reference boardWills Wang
This patch add board-level code and base DT for AP121. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21drivers: spi: add spi support for QCA/Atheros ath79 SOCsWills Wang
This patch add a compatible spi driver for ath79 series SOC. Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21drivers: serial: add serial driver for ar933x SOCWills Wang
This patch add support for ar933x serial. Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-21drivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros qca953x.Wills Wang
This is a simple pinctrl driver, it just support uart and spi pin-mux now. Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Simon Glass <sjg@chromium.org> [fixed typo in commit subject line] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21drivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros ar933x.Wills Wang
This is a simple pinctrl driver, it just support uart and spi pin-mux now. Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Simon Glass <sjg@chromium.org> [fixed typo in commit subject line] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21mips: ath79: add support for QCA953x SOCsWills Wang
This patch enable work for qca953x SOC. Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-21mips: ath79: add support for AR933x SOCsWills Wang
This patch enable work for ar933x SOC. Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-21mips: add base support for QCA/Atheros ath79 SOCsWills Wang
This patch add some common code for QCA/Atheros ath79 SOCs such as DDR tuning, chip reset and CPU detection. Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-21Add support for 64-bit MIPS to examples/standaloneStanislav Galabov
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-21Fix FreeBSD loader API so that it works on both 32-bit and 64-bit targets.Stanislav Galabov
Specifically tested on MIPS under QEMU (works with all combination of bit-ness and endian-ness) Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-21Use CONFIG_IDE_SWAP_IO when running on big-endian MIPS (32 or 64-bit) in ↵Stanislav Galabov
QEMU so that IDE transfers work properly Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-21Properly calculate ATA_SECTORWORDS, using a fixed-size integer, so it works ↵Stanislav Galabov
for both 32-bit and 64-bit targets Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-17Merge git://git.denx.de/u-boot-dmTom Rini
2016-05-17Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-05-17dm: mmc: test: Add tests for MMCSimon Glass
Add a simple test which checks that a sandbox-emulated SD card can be used correctly. This tests plumbing through the MMC stack's block-device implementaion. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: sandbox: mmc: Enable building MMC code for sandboxSimon Glass
Enable building the MMC code for sandbox. This increases build coverage for sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: sandbox: Add an SD-card emulationSimon Glass
Add an emulation of an SD card to sandbox, allowing MMC to be used in tests. The emulation is very simple, supporting only card detection and reading test data. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: Add support for driver-model block devicesSimon Glass
Add support for enabling CONFIG_BLK with MMC. This involves changing a few functions to use struct udevice and adding a MMC block device driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: Add a way to bind MMC devices with driver modelSimon Glass
Binding an MMC device when CONFIG_BLK is enabled requires that a block device be bound as a child of the MMC device. Add a function to do this. The mmc_create() method will be used only when DM_BLK is disabled. Add an unbind method also. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: Implement the MMC functions for block devicesSimon Glass
Implement the functions in mmc_legacy.c for driver-model block devices, so that MMC can use driver model for these. This allows CONFIG_BLK to be enabled with DM_MMC. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: sandbox: Only enable the sandbox MMC driver when validSimon Glass
This driver will require generic MMC and block-device support in a future commit. To avoid test errors, make this change now. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: Adjust mmc_switch_part() to use a struct mmcSimon Glass
Instead of looking up the MMC device by number, just pass it in. This makes it possible to use this function with driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: blk: Use the correct error code for blk_get_device_by_str()Simon Glass
Return -EINVAL instead of -1 in this function, to provide a more meaningful error. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: Move the device list into a separate fileSimon Glass
At present the MMC subsystem maintains its own list of MMC devices. This cannot work with driver model, which needs to maintain this itself. Move the list code into a separate 'legacy' file. The core MMC code remains, and will be shared with the driver-model implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: Set up the device pointer when using the MMC uclassSimon Glass
Update the existing drivers to set up this new pointer. This will be required by the MMC uclass. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: blk: Add a comment as to why the bdev member is neededSimon Glass
This member should be explained, since it is not obvious why it is needed. Add a comment. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: part: Drop the block_drvr tableSimon Glass
This is not needed since we can use the functions provided by the legacy block device support. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: part: Use the legacy block driver for hardware partition supportSimon Glass
Drop use of the table in part.c for this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: blk: Add functions to select a hardware partitionSimon Glass
The block device uclass does not currently support selecting a particular hardware partition but this is needed for MMC. Add it so that the blk API can support MMC properly. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: Use the new select_hwpart() APISimon Glass
Avoid calling directly into the MMC code - use the new API call instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: spl: Use the legacy block interface in SPLSimon Glass
Bring this in for SPL so that we can use generic code for loading from block devices. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: Add a function to obtain the block deviceSimon Glass
The MMC block device is contained within struct mmc. But with driver model this will not be the case. Add a function to obtain the block device. We can later implement this for CONFIG_BLK. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: Implement the select_hwpart() methodSimon Glass
Implement this method so that hardware partitions will work correctly with MMC. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: mmc: Move mmc_switch_part() above its callersSimon Glass
This function is defined after it is used. In preparation for making it static, move it up a little. Also drop the printf() which should not appear in a driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: blk: Free the block device name when unboundSimon Glass
Mark the device name as allocated so that it will be freed correctly when the device is unbound. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: core: Allow device names to be freed automaticallySimon Glass
Some devices have a name that is stored in allocated memory. At present there is no mechanism to free this memory when the device is unbound. Add a device flag to track whether a name is allocated and a function to add the flag. Free the memory when the device is unbound. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: blk: Fix allocation of block-device numberingSimon Glass
Due to code ordering the block devices are not numbered sequentially. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: sandbox: Enable systemaceSimon Glass
Enable building the systemace code for sandbox. This increases build coverage for sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: systemace: Add driver-mode block-device supportSimon Glass
Add support for CONFIG_BLK to the systemace driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: systemace: Reorder function to avoid forward declarataionsSimon Glass
Move the systemace_get_dev() function below systemace_read() so that we can avoid a forward declaration. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: blk: Add a easier way to create a named block deviceSimon Glass
Add a function that automatically builds the device name given the parent and a supplied string. Most callers will want to do this, so putting this functionality in one place makes more sense. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: blk: Allow blk_create_device() to allocate the device numberSimon Glass
Allow a devnum parameter of -1 to indicate that the device number should be alocated automatically. The next highest available device number for that interface type is used. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: sandbox: Enable SATASimon Glass
Enable building the SATA code for sandbox. This increases build coverage for sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: sata: Add support for driver-model block devicesSimon Glass
Add driver-model block-device support to the SATA implementation. This is just a dummy implementation for now, since the SATA low-level API uses numbered devices and that doesn't fit with driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: sandbox: Enable SCSISimon Glass
Enable building the SCSI code for sandbox. This increases build coverage for sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: scsi: Add support for driver-model block devicesSimon Glass
Add driver-model block-device support to the SCSI implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: sandbox: Enable IDESimon Glass
Enable building the IDE code for sandbox. This is for build coverage only. It does not currently work. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: ide: Add support for driver-model block devicesSimon Glass
Add driver-model block-device support to the IDE implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: part: Drop the get_dev() methodSimon Glass
This is now handled by the legacy block driver. The get_dev() method is no-longer used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-26 03:45:35 +0000