summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-26armv8: ls1046ardb: Enable IFC for SPL buildYork Sun
Commit a52ff334c5b1 ("armv8: ls1046ardb: SPL size reduction") reduced image size for SPL. IFC was disabled. If PPA is loaded in SPL, MMU is enabled as a result. Removing IFC skips IFC region in the MMU table, causing later failure in RAM version U-boot when accessing CPLD through IFC. Only disable IFC if PPA is not enabled for SPL. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26arm64: ls1012a: enable DM support for sataYuantian Tang
Enable related configs to support sata DM feature. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26scsi: ceva: add ls1012a soc supportYuantian Tang
Make the code structure more general so that more socs can be added easily and also remove speed limitation restriction. Add the ls1012a sata support as well. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (with and without CONFIG_OF_LIVE on zynqmp zcu102) Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: dts: fsl-ls1012a: add sata node supportYuantian Tang
One ls1012a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization. Add sata node to support this feature. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: fsl: remove sata supportYuantian Tang
Remove the old implementation in order to enable DM for sata. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: layerscape: Enabled I-cache for SPL bootYork Sun
Enable I-cache for SPL boot to boost performance. Earlier MMU was enabled only for LS2080A and has since been dropped by commit f539c8a4a7a5 ("armv8: ls2080a: Drop early MMU for SPL build"). Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls1046ardb: ls1046aqds: Move SPL macros to defconfigYork Sun
Instead of defining Kconfig macros in header file, move them to defconfig files. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls2088ardb: Move CONFIG_SPI_FLASH, CONFIG_SPI_FLASH_SPANSION to defconfigAshish Kumar
Move CONFIG_SPI_FLASH_SPANSION, CONFIG_SPI_FLASH, to defconfig. Also disable disable 4K erase size option. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26configs: Disable 4k erase sector size for spansion "s25fs512s" flashAshish Kumar
4K erase size is used only in case of hydrid mode which is not supported on any NXP platform with flash "s25fs512s". Supported mode is uniform sector, with erase size 256kiB. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26LS1088ARDB: Secure Boot:Change load address of dpl header in SDVinitha V Pillai
Change address of DPL header in SD. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls2080ardb: update copyright claimAlison Wang
This patch updates the copyright claim for the issues reported by legal review. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26LS1043ARBD: Fix SD Boot issue with PPAVinitha V Pillai
CONFIG_SPL_FSL_LS_PPA is needed only in case of falcon boot Support for this is not present in PPA currently, so removing the default option from defconfig Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls1088a: change dpl load command from apply to lazyapplyJagdish Gediya
use "fsl_mc lazyapply dpl addr" instead of "fsl_mc apply dpl addr" change dpl load addr to 0x80001000 from 0x80200000 because dpl gets corrupted at 0x80200000 during bootm command excecution. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26cmd/ubi.c: Fix format warningTom Rini
On 64bit platforms we would otherwise see: ../cmd/ubi.c: In function 'ubi_volume_read': ../cmd/ubi.c:359:16: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'size_t {aka long unsigned int}' [-Wformat=] Fixes: 68c7025d99db ("cmd: ubi: print load size after establishing volume size") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-26Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2018-07-26Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-07-26Makefile: Fix 'clean' targetTom Rini
Now that we have removed the DocBook files we need to not try and clean that directory. Reported-by: ericywl <midnight2903@gmail.com> Reported-by: Jagan Teki <jagan@amarulasolutions.com> Fixes: 78a88f7930be ("doc: Replace DocBook with sphinx-based docs") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-25MAINTAINERS: assign lib/charset.cHeinrich Schuchardt
lib/charset.c is only used by the EFI subsystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_selftest: unit test for GetTime()Heinrich Schuchardt
Provide a unit test for the GetTime() runtime service. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_selftest: support printing leading zeroesHeinrich Schuchardt
Allow specifying the precision when printing integers, e.g. efi_st_printf("%.4u-%.2u-%.2u\n", year, month, day); Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: complete implementation of GetTime()Heinrich Schuchardt
Implement the missing parts of the GetTime() runtime service. Fill seconds. Fill daylight saving time flag correctly. Provide dummy values for capabilities. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: remove unused efi_get_time_init()Heinrich Schuchardt
Remove unused function efi_get_time_init(). Initialization of the RTC has to be done in board bring up not in the EFI subsystem. There is no RTC device in the UEFI spec. The RTC is only accessed through the runtime services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25rtc: remove CONFIG_CMD_DATE dependencyHeinrich Schuchardt
The EFI subsystem accesses the real time clock and is enabled by default. So we should drop any CONFIG_CMD_DATE dependency from the real time clock drivers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_selftest: unit test for CalculateCrc32()Heinrich Schuchardt
This unit test checks the CalculateCrc32 bootservice and checks the headers of the system table, the boot services tablle, and the runtime services table before and after ExitBootServices(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_selftest: check crc32 for InstallConfigurationTableHeinrich Schuchardt
InstallConfigurationTable() may change the number of installed configuration tables. Check the crc32 of the system table. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: update crc32 in InstallConfigurationTableHeinrich Schuchardt
If the number of installed tables is changed in InstallConfigurationTable() update the crc32 of the system table. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: correct signature of CalculateCrc32()Heinrich Schuchardt
Use const for the buffer. We are not changing the buffer. Use efi_uintn_t where prescribed by the UEFI spec. Prefer u32 over uint32_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_selftest: test InstallConfigurationTable()Heinrich Schuchardt
Provide a unit test for InstallConfigurationTable(). A table is installed, updated, removed. The table entry and the triggering of events is checked. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: allocate configuration table arrayHeinrich Schuchardt
The system table contains a link to the list of configurations tables. These include the device tree, SMBIOS table, and the ACPI table. This array is currently statically linked. With the patch it is allocated as EFI_RUNTIME_SERVICES_DATA. Due to the structure of the system table we cannot work with a linked list here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: calculate crc32 for EFI tablesHeinrich Schuchardt
For the boot and runtime services tables and for the system table the crc32 has to be set in the header. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: provide firmware revisionHeinrich Schuchardt
Provide a firmware revision in the system table using the Makefile variables VERSION and PATCHLEVEL, e.g. 0x20180700 for v2018.07. Correct the type of the firmware vendor. It is a u16* pointer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: correct headersize EFI tablesHeinrich Schuchardt
The headersize field has to be set to the size of the whole table including the header. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: correct EFI_RUNTIME_SERVICES_SIGNATUREHeinrich Schuchardt
The value for EFI_RUNTIME_SERVICES_SIGNATURE does not match the UEFI spec 2.7. Reported-by: Takahiro Akashi <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: specify UEFI spec revisionHeinrich Schuchardt
Both in the boot and the runtime services tables we have to specify the UEFI spec revision. The same value is already used for the system table. So let's use a common constant. In the boot services table we have to provide the header signature. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: clear screen has to reset cursor positionHeinrich Schuchardt
After clearing the screen the cursor position is row 0, column 0. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: EFI_SIMPLE_TEXT_INPUT_PROTOCOL.Reset()Heinrich Schuchardt
Implement the reset service of the EFI_SIMPLE_TEXT_INPUT_PROTOCOL. This should resolve the error reported by the SCT in Protocol/SimpleTextIn/BlackBoxTest/SimpleTextInBBTestFunction.c:193 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: set revision in loaded image protocolHeinrich Schuchardt
The revision number has to be set in the loaded image protocol. The problem was detected by running the SCT in Protocol/LoadedImage/BlackBoxTest/LoadedImageBBTestMain.c:890 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_driver: set DM_FLAG_NAME_ALLOCED flagHeinrich Schuchardt
Set the DM_FLAG_NAME_ALLOCED flag to avoid a memory leak when the block device is removed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_selftest: test writing to fileHeinrich Schuchardt
Provide a unit test for writing to a FAT file system. Add some additional comments in block device unit test. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25fs: fat: cannot write to subdirectoriesHeinrich Schuchardt
fs_fat_write() is not able to write to subdirectories. Currently if a filepath with a leading slash is passed, the slash is treated as part of the filename to be created in the root directory. Strip leading (back-)slashes. Check that the remaining filename does not contain any illegal characters (<>:"/\|?*). This way we will throw an error when trying to write to a subdirectory. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: check map_key in ExitBootServicesHeinrich Schuchardt
The UEFI spec requires that the memory map key is checked in ExitBootServices(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: check parameters of GetMemoryMapHeinrich Schuchardt
Check the parameters of boottime service GetMemoryMap(). Return EFI_INVALID_PARAMETER where required by the UEFI spec. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: check parameters in memory allocationHeinrich Schuchardt
If no pointer is provided throw an error. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: check parameters of CreateEventHeinrich Schuchardt
Rigorously check the TPL level and the event type. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25x86: Add efi_loader bits to x86_64 linker scriptAlexander Graf
The x86_64 linker script was missing efi runtime information. Add it. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: Rename sections to allow for implicit dataAlexander Graf
Some times gcc may generate data that is then used within code that may be part of an efi runtime section. That data could be jump tables, constants or strings. In order to make sure we catch these, we need to ensure that gcc emits them into a section that we can relocate together with all the other efi runtime bits. This only works if the -ffunction-sections and -fdata-sections flags are passed and the efi runtime functions are in a section that starts with ".text". Up to now we had all efi runtime bits in sections that did not interfere with the normal section naming scheme, but this forces us to do so. Hence we need to move the efi_loader text/data/rodata sections before the global *(.text*) catch-all section. With this patch in place, we should hopefully have an easier time to extend the efi runtime functionality in the future. Signed-off-by: Alexander Graf <agraf@suse.de> [agraf: Fix x86_64 breakage]
2018-07-25efi: Drop error return in efi_carve_out_dt_rsv()Simon Glass
This function currently returns an error code, but never uses it. There is no function comment so it is not obvious why. Presuambly the error is not important. Update the function to explain its purpose and why it ignores the error. Drop the useful error return value. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi: Tidy up device-tree-size calculation in copy_fdt()Simon Glass
This is a bit confusing at present since it adds 4KB to the pointer, then rounds it up. It looks like a bug, but is not. Move the 4KB addition into a separate statement and expand the comment. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_selftest: Clean up a few comments and messagesSimon Glass
Fix the 'amp' typo, expand on what 'steps' is and fix a few other minor things. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25vsprintf: Handle NULL with %pUSimon Glass
At present a NULL pointer passed to printf for a %pU argument will cause U-Boot to access memory at 0. Fix this by adding a check, and print "(null)" instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexander Graf <agraf@suse.de> [agraf: s/(null)/<NULL>/] Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2025-01-19 10:20:42 +0000