summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-22armv8: lx2160a: add PCIe controller DT nodesHou Zhiqiang
The LX2160A integrated 6 PCIe Gen4 controllers. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22pci: ls_pcie_g4: add device tree fixups for PCI Stream IDsHou Zhiqiang
Add the infrastructure for Layerscape SoCs PCIe Gen4 controller to update device tree nodes to convey SMMU stream IDs in the device tree. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22kconfig: add dependency PCIE_LAYERSCAPE_GEN4 for FSL_PCIE_COMPATHou Zhiqiang
The LX2160A PCIe is using driver PCIE_LAYERSCAPE_GEN4 instead of PCIE_LAYERSCAPE. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCsHou Zhiqiang
Add PCIe Gen4 driver for the NXP Layerscape SoCs. This PCIe controller is based on the Mobiveil IP, which is compatible with the PCI Express™ Base Specification, Revision 4.0. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Bao Xiaowei <Xiaowei.Bao@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22armv8: lx2160a: add MMU table entries for PCIeHou Zhiqiang
The lx2160a have up to 6 PCIe controllers and have different address and size of PCIe region. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22armv8: fsl-layerscpae: correct the PCIe controllers' region sizeHou Zhiqiang
The LS2080A has 8GB region for each PCIe controller, while the other platforms have 32GB. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22armv8: layerscape: use PCIe address macro for precompile PCIe MMU entryHou Zhiqiang
Change to use PCIe address macro to determine if precompile the PCIe MMU table entry. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22configs: ls1046: Update mtd-id for QSPI nor in mtdparts variableKuldeep Singh
Update mtd-id for QSPI nor due to change introduced in mtd/spi in linux 5.0. commit 84d043185dbe ("spi: Add a driver for the Freescale/NXP QuadSPI controller") This modification is only for linux kernel version >= 5.0. To use bootargs for kernel < 5.0, use the following bootargs CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:2m(uboot),14m(free)" CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:2m(uboot),14m(free)" Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-21Merge git://git.denx.de/u-boot-mpc83xxTom Rini
- Update MPC83xx platform support to current best practices, etc.
2019-05-21Merge tag 'mmc-5-20' of https://github.com/MrVan/u-bootTom Rini
"Please pull mmc-5-20 for v2019.07, this is to avoid break i.MX53 boot."
2019-05-21Merge tag 'video-for-2019.07-rc3' of git://git.denx.de/u-boot-videoTom Rini
- update for using splashfile instead of location->name when loading the splash image from a FIT - updates for loading internal and external splash data from FIT - DM_GPIO/DM_VIDEO migration for mx53 cx9020 board - fix boot issue on mx6sabresd board after DM_VIDEO migration - increase the max preallocated framebuffer BPP to 32 in ipuv3 driver to prepare for configurations with higher color depth - allow to use vidconsole_put_string() in board code for text output on LCD displays
2019-05-21mpc83xx: Add gazerbeam boardDirk Eibach
The gdsys gazerbeam board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 2x 10/100 Mbit/s Ethernet (optional) Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gazerbeam: Add u-boot specific dts include fileMario Six
Add a U-Boot specific dts file, which encapsulates the needed modifications to the Gazerbeam Linux device tree. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gazerbeam: Import Linux DTMario Six
Import the Linux device tree for the Gazerbeam board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21board: gazerbeam: Fix SC detectionMario Six
The single channel detection in the gazerbeam board driver was not implemented correctly. Fix the detection. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: ioep-fpga: Switch to gazerbeam-style reportingMario Six
Use a more extensive FPGA feature reporting style in the gdsys ioep-fpga driver. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: cmd_ioloop: Make DM compatibleMario Six
Make the ioloop command DM compatible, while keeping the old functionality for not-yet-converted boards. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: cmd_ioloop: Introduce commenting enumMario Six
Replace the boolean parameter of io_check_status that controls whether the status is printed or not with a documenting enum. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: cmd_ioloop: Fix style violationsMario Six
Fix some style violations in the ioloop command, and make the code more readable where possible. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: mpc8308: Add FPGA flavor optionMario Six
More recent versions of IHS FPGAs feature a different memory layout. Add a Kconfig option to differentiate between the legacy layout, and the new layout (which is used on the upcoming "Gazerbeam" and later boards). Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: Introduce GDSYS_LEGACY_DRIVERSMario Six
Future gdsys boards will switch from the legacy drivers in board/gdsys/common to DM-based drivers. Define a Kconfig option that disables the legacy drivers. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: mpc8308: Don't use manual RAM config if RAM driver is activeMario Six
The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: mpc8308: Migrate SYS_FPGA{0, 1}_{BASE, SIZE} to KconfigMario Six
Move CONFIG_SYS_FPGA0_BASE, CONFIG_SYS_FPGA0_SIZE, CONFIG_SYS_FPGA1_BASE, and CONFIG_SYS_FPGA1_SIZE to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: mpc8308: Use shadow register for output GPIO valuesMario Six
Since the gpio output status on MPC8xxx cannot be read back, it has to be buffered locally. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: mpc8308: Fix style violationsMario Six
Fix some style violations in the gdsys MPC8308 board files, and make the code more readable. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: Post ppc4xx removal cleanupMario Six
The ppc4xx architecture was removed, and with it several old gdsys 44x boards, but some "debris" from these purged boards was left over. This patch removes these remnants (mostly entries in Makefiles, some now superfluous data structures and some now obsolete config variables from the whitelist). Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys: phy: Adapt fixup_88e1518() to latest Release NotesDirk Eibach
The initialization sequence in the newest release notes of the 88e1518 phy omits two commands. Remove them from the sequence. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2019-05-21ihs_mdio: Use new regmap interfaceMario Six
For the DM case, use the proper parameter for the regmap_init_mem call (which is the ofnode, not the udevice). Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-21gdsys_rxaui_ctrl: Use new regmap interfaceMario Six
For the DM case, use the proper parameter for the regmap_init_mem call (which is the ofnode, not the udevice). Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21gdsys_rxaui_ctrl: Return old stateMario Six
Make the gdsys_rxaui_ctrl polarity setting function return the old state to comply with the API requirements. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21i2c: ihs: Improve error handlingMario Six
Improve the error handling and reporting of the IHS I2C driver. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-05-21i2c: ihs: Get rid of fpgamapMario Six
Since the IHS I2C driver want upstream, the surrounding infrastructure has changed quite a bit (notably, the fpgamap driver was replaced with a regmap driver). Update the driver to work with these changes. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-05-21cmd: binop: Use hex2binMario Six
Use the new hex2bin function in the binop command instead of converting the data manually. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-21cmd: binop: Use new environment apiMario Six
Since the binop command was introduced, the environment API was changed. Use the new API to make the command work again. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-21mpc83xx_clk: Add enable methodMario Six
Some DM drivers have hardcoded clk_enable calls when handling clocks (for example the fsl_esdhc driver). To work with these drivers, add an enable method to the MCP83xx clock driver (which does nothing, because the clocks are always enabled). Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Define _end symbolMario Six
To support OF_EMBED, the MPC83xx architecture has to define the "_end" symbol to correctly access the appended DT. Fortunately, MPC8xx already defines the symbol, and the linker script is quite similar to that of MPC83xx, so copy this approach for MPC83xx. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21powerpc: Simplify processor.hMario Six
Lots of stuff in processor.h was taken verbatim from the Linux kernel. It was never synced, so most of it was removed or changed in the kernel since it was imported. Remove all the stuff that is unused in the current U-Boot sources; should anybody feel the need to re-sync with the kernel, they can do it later on. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21keymile: Factor out common includes againMario Six
Not that the Kconfig conversion of a lot of variables is done, we can factor out the common include files for the keymile boards again (which now contain hardly any #ifdef logic at all). Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21keymile: Remove CONFIG_SYS_APP{1, 2}_{BASE, SIZE}Mario Six
CONFIG_SYS_APP1_BASE, CONFIG_SYS_APP2_BASE, CONFIG_SYS_APP1_SIZE, and CONFIG_SYS_APP2_SIZE are no longer used in the keymile config files (they were used for setting values, which were converted to Kconfig earlier in the series). Remove them from the configs and the whitelist. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Use pre-defined asm functionsMario Six
For a lot of inline assembly calls in the mpc8xxx and mpc83xx directories, we already have convenient pre-defined helper functions, but they're not used, resulting in hard-to-read code. Use these helper functions where ever possible and useful. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Replace ppcDWstore with inline assemblyMario Six
ppcDWstore/ppcDWload are hardly used by any board, but since they're implemented in start.S, they're always present in every U-Boot image, even if they're not needed. Re-implement these fuctions in C with inline assembly, so that the compiler can decide when to actually include them. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Don't define cpu_eth_init for DM ethMario Six
Don't use the legacy method of initializing the ethernet controller on MPC83xx when DM is active. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Add arch clock.h to make SDHC workMario Six
The fsl-esdhc driver can be used for the SDHC functionality on MPC83xx, but it needs some additional definitions. Add a clock.h file, so we can use the driver for MPC83xx. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Get rid of CONFIG_SYS_LBC_*Mario Six
Except for one counter example, CONFIG_SYS_LBC_LBCR always has a value of either 0x00040000 or 0x00000000. CONFIG_SYS_LBC_MRTPR always has the value 0x20000000. CONFIG_SYS_LBC_LSDMR_{1,2,4,5} are not set for any mpc83xx board. CONFIG_SYS_LBC_LSRT is set by one board (to 0x32000000). To simplify the configuration files, hardcode the setting of these values for mpc83xx. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASEMario Six
CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Get rid of CONFIG_SYS_DDR_BASEMario Six
CONFIG_SYS_DDR_BASE is specific to mpc83xx an is always set to the same value as CONFIG_SYS_SDRAM_BASE. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate CONFIG_LCRR_* to KconfigMario Six
Migrate the CONFIG_LCRR_* settings to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate SPCR to KconfigMario Six
Migrate the SPCR setting to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate arbiter config to KconfigMario Six
Migrate the arbiter configuration to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc8308: Migrate system io config to KconfigMario Six
Migrate the system IO configuration setting to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
generated by cgit (git 2.34.1) at 2024-12-26 14:10:25 +0000