summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-21Merge branch 'master' of git://www.denx.de/git/u-bootMarkus Klotzbuecher
2008-07-20microblaze: Fix printf() format issuesMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2008-07-20Remove unused code from lib_arm/bootm.cGururaja Hebbar K R
Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
2008-07-20tqm85xx: Demystify 'DK: !!!' commentDetlev Zundel
Signed-off-by: Detlev Zundel <dzu@denx.de>
2008-07-2083xx/85xx/86xx: Add LTEDR local bus definitionsDetlev Zundel
Signed-off-by: Detlev Zundel <dzu@denx.de>
2008-07-20serial_xuartlite.c: fix compiler warningsRicardo Ribalda Delgado
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-20POST: Add disable interrupts in some of the missing CPU POST testsStefan Roese
Some CPU POST tests did not disable the interrupts while running. This seems to be necessary to protect this self modifying code. Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-20ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOULStefan Roese
This is needed for boards that define CFG_64BIT_STRTOUL but don't define CFG_64BIT_LBA. Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-20POST PPC4xx/spr IVPR only if PPC440Niklaus Giger
The SPR IVPR register is only present (as far as I know) for processors with a PPC440 core. Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> Acked-by: Stefan Roese <sr@denx.de>
2008-07-20Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2008-07-18ppc4xx: Enable 64bit printf format on 440/460 platformsStefan Roese
This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all 440/460 platforms. This may be needed since those platforms support 36bit physical address space. Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-18ppc4xx: Fix incorrect MODTx setup for some DIMM configurationsStefan Roese
This patch fixes a problem with incorrect MODTx (On Die Termination) setup for a configuration with multiple DIMM's and multiple ranks. Without this change Katmai was unable to boot Linux with DDR2 frequency >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux with DDR2 frequency = 640MHz and mem=4GB. Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-17cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATASebastian Siewior
This got broken by commits 93c56f212c [cfi_flash: support of long cmd in U-boot.] That command needs to be in little endian format on BE machines with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0 gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into the cmdbuf in case portwidth = chipwidth = 8bit. Cc: Alexey Korolev <akorolev@infradead.org> Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
2008-07-15Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort MakefileWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-15Round the serial port clock divisor value returned by calc_divisor()Hugo Villeneuve
Round the serial port clock divisor value returned by calc_divisor() Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2008-07-15Fix DHCP protocol so U-Boot does not respond too earlyRobin Getz
on the network with it's offered IP number; it should not reply until after it has received a DHCP ACK message. Also ensures that U-Boot does it's DHCPREQUEST as broadcast (per RFC 2131). Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Acked-by: Ben Warren <biggerbadderben@gmail.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-15cfi_flash: make the command u32 onlySebastian Siewior
This got changed by commit 93c56f212c [cfi_flash: support of long cmd in U-boot.] Long is the wrong type because it will behave differently on 64bit machines in a way that is probably not expected. u32 should be enough. Cc: Alexey Korolev <akorolev@infradead.org> Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
2008-07-15tools/gitignore: update to all generated filesJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-15Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk
2008-07-15Merge branch 'master' of git://git.denx.de/u-boot-mpc86xxWolfgang Denk
2008-07-15Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk
2008-07-15Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2008-07-15mpc5xxx: Add MVBC_P board supportAndre Schwarz
The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet controller (using e1000) and custom Altera Cyclone-II FPGA on PCI. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-15Update Freescale sys_eeprom.c to handle CCID formatsTimur Tabi
Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The NXID format replaces the older CCID format, but it's important to support both since most boards out there still use the CCID format. This change is in preparation for using one file to handle both formats. This will also unify EEPROM support for all Freescale 85xx and 86xx boards. Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR instead of ID_EEPROM_ADDR. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-07-15pci: sh: Add pci_skip_dev and pci_print_dev functionNobuhiro Iwamatsu
Add function of new PCI, pci_skip_dev and pci_print_dev. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-07-14Clean up INIT_RAM optionsAndy Fleming
The L2_INIT_RAM option was unused, and recent changes to the TLB code meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce the amount of mapped space attached to nothing, we change things so the TLBs get cleared. Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-07-14Remove fake flash bank from 8544 DSAndy Fleming
The fake flash bank was generating errors for anyone who didn't have a PromJET hooked up to the board. As that constitutes the vast majority of users, we remove it. Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-07-14MPC8544DS: Add ATI Video card supportKumar Gala
Add support for using a PCIe ATI Video card on PCIe2. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-1485xx: Add some L1/L2 SPR register definitionsKumar Gala
Add new L1/L2 SPRs related to e500mc cache config and control. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14MPC8544DS: Report board id, board version and fpga version.Kumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-1485xx: Cleanup L2 cache size detectionKumar Gala
The L2 size detection code was a bit confusing and we kept having to add code to it to handle new processors. Change the sense of detection so we look for the older processors that aren't changing. Also added support for 1M cache size on 8572. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14sbc8560: enable CONFIG_OF_LIBFDT by defaultPaul Gortmaker
Make the default build for the sbc8560 board be powerpc capable with libfdt support. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-07-14Fix indentation for default boot environment variablesAndy Fleming
This was proposed by Paul Gortmaker in response to Wolfgang's comments on similar #defines in sbc8560.h. Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-07-14sbc8560: add default fdt valuesPaul Gortmaker
Add in the default fdt settings and the typical EXTRA_ENV settings as borrowed from the mpc8560ads. Fix a couple of stale references to the mpc8560ads dating back to the original clone/fork. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-07-14sbc8560: add in ft_board_setup()Paul Gortmaker
Add in for the sbc8560, the ft_board_setup() routine, based on what is in use for the Freescale MPC8560ADS board. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-07-14sbc8560: define eth0 and eth1 instead of eth1 and eth2Paul Gortmaker
The existing config doesn't define CONFIG_HAS_ETH0, and so the fdt support doesn't update the zeros in the dtb local-mac with real data from the u-boot env. Since the existing config is tailored to just two interfaces, get rid of the ETH2 definitions at the same time. Also don't include any end user specific data into the environment by default -- things like MAC address, network parameters etc. need to come from the end user. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-07-14sbc8560: properly set cs0_bnds for 512MBPaul Gortmaker
The sbc8560 board ships with 512MB of memory installed, but the current cs0_bnds is hard coded for 256MB. Set the value based on CFG_SDRAM_SIZE. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-07-14sbc8560: proper definitions for TSEC.Paul Gortmaker
The definitions for the TSEC have become out of date. There is no longer any such options like "CONFIG_MPC85xx_TSEC1" or similar. Update to match those of other boards, like the MPC8560ADS. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
2008-07-148xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreqPaul Gortmaker
Some boards that have external 16550 UARTs don't have a direct tie between bi_busfreq and the clock used for the UARTs. Boards that do have such a tie should set CFG_NS16550_CLK to be get_bus_freq(0) -- which most of them do already. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
2008-07-14Change the temp map to ROM to align addresses to page size.Andrew Klossner
With a page size of BOOKE_PAGESZ_16M, both the real and effective addresses must be multiples of 16MB. The hardware silently truncates them so the code happens to work. This patch clarifies the situation by establishing addresses that the hardware doesn't need to truncate. Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-07-14mpc85xx: use IS_E_PROCESSOR macroKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-07-14fdt: add crypto node handling for MPC8{3, 5}xxE processorsKim Phillips
Delete the crypto node if not on an E-processor. If on 8360 or 834x family, check rev and up-rev crypto node (to SEC rev. 2.4 property values) if on an 'EA' processor, e.g. MPC8349EA. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-07-14ARM DaVinci: Remove extern phy_t declaration by moving code to proper placeHugo Villeneuve
ARM DaVinci: Remove extern phy_t declaration by moving code to proper place. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2008-07-14ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of ↵Hugo Villeneuve
i2c_init() ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init(). Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2008-07-14Fix some more printf() format problems.Kumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14Fix coding style; make code better parsable by external toolsWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14cpu/i386/serial.c: Fix syntax errorsWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14elppc board: Coding style cleanup.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14elppc board: fix syntax error.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14EB+MCF-EV123 board: fix coding style (alingment)Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit (git 2.34.1) at 2024-12-29 08:02:14 +0000