summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-13ARM: dts: stm32: add FMC2 EBI support for stm32mp157cChristophe Kerello
This patch adds FMC2 External Bus Interface support on stm32mp157c. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13configs: stm32mp: add CONFIG_STM32_FMC2_EBIChristophe Kerello
This patch enables the support of FMC2 EBI. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: update fdt fixup partitions tableChristophe Kerello
This patch adds "st,stm32mp1-fmc2-nfc" compatible string in the fdt fixup partitions table. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: get resources from parent nodeChristophe Kerello
FMC2 EBI support has been added. Common resources (registers base address and clock) can now be shared between the 2 drivers using "st,stm32mp1-fmc2-nfc" compatible string. It means that the common resources should now be found in the parent device when EBI node is available. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driverChristophe Kerello
The driver adds the support for the STMicroelectronics FMC2 EBI controller found on STM32MP SOCs. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: use clrsetbits_le32Christophe Kerello
This patch uses clrsetbits_le32 function instead of multiple instructions. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macrosChristophe Kerello
This patch removes custom macros and uses FIELD_PREP and FIELD_GET macros. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where ↵Christophe Kerello
relevant This patch renames functions and local variables. This cleanup is done to get all functions starting by stm32_fmc2_nfc in the FMC2 raw NAND driver when all functions will start by stm32_fmc2_ebi in the FMC2 EBI driver. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeoutsChristophe Kerello
FMC2_TIMEOUT_5S will be used each time that we need to wait. It was seen, during stress tests in an overloaded system, that we could be close to 1 second, even if we never met this value. To be safe, FMC2_TIMEOUT_MS is set to 5 seconds. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: remove useless inline commentsChristophe Kerello
Remove inline comments that are useless since function label are self explanatory. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: fix a buffer overflowChristophe Kerello
The chip select defined in the device tree could only be 0 or 1. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13arm: stm32mp: stm32prog: use IS_ENABLED to prevent ifdefPatrick Delaunay
Use IS_ENABLED to prevent ifdef in stm32prog command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13arm: stm32mp: bsec: use IS_ENABLED to prevent ifdefPatrick Delaunay
Use IS_ENABLED to prevent ifdef in bsec driver. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setupPatrick Delaunay
Use IS_ENABLED to prevent ifdef in ft_board_setup. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in env functionsPatrick Delaunay
Use IS_ENABLED to prevent ifdef in env functions: - env_get_location - env_ext4_get_intf - mmc_get_env_dev Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_initPatrick Delaunay
Use IS_ENABLED to prevent ifdef in board_late_init. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fixPatrick Delaunay
Use IS_ENABLED to prevent ifdef in dk2_i2c1_fix. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_infPatrick Delaunay
Use CONFIG_IS_ENABLED to prevent ifdef in set_dfu_alt_inf. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_initPatrick Delaunay
Use IS_ENABLED to prevent ifdef in sysconf_init. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_powerPatrick Delaunay
Use IS_ENABLED to prevent ifdef in board_check_usb_power. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in ↵Patrick Delaunay
g_dnl_board_usb_cable_connected Use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected and in g_dnl_bind_fixup Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_checkPatrick Delaunay
Use IS_ENABLED to prevent ifdef in board_key_check Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13usb: host: dwc3-sti-glue: Fix ofnode_valid() parameterPatrice Chotard
node varaible is used as iterator into ofnode_for_each_subnode() loop, when exiting of it, node is no more a valid ofnode. Use dwc3_node instead as parameter of ofnode_valid() Fixes: ac28e59a574d ("usb: Migrate to support live DT for some driver") Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Cc: Kever Yang <kever.yang@rock-chips.com>
2020-08-10configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10test/py: fix SquashFS testsJoao Marcos Costa
Use "cons.config.build_dir" instead of writing to the source directory (read-only). This will fix the test failures in Azure. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-08Makefile: sunxi: Don't use binman to build ATF imageSimon Glass
At present with sunxi 64-bit, the Makefile builds u-boot-sunxi-with-spl.bin and then binman overwrites it with its own version. But the binman definition lacks some parts, in particular BL31. For now, work around this with a hack. Tested-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 42b18df80fd ("x86: Makefile: Drop explicit targets built by binman")
2020-08-08test/py: serial# cannot be overwritten on some devicesHeinrich Schuchardt
On some devices the environment variable serial# cannot be overwritten. Set the variable only if it is not set. For our unit test it is sufficient to test if any value for serial-number is set. Fixes: 8a5cdf601f8d ("test: efi_selftest: Do not force serial# setting") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-08Merge branch '2020-08-07-misc-improvements'Tom Rini
- SquashFS support - Assorted bugfixes
2020-08-07test: py: test_shell_run() with CONFIG_HUSH_PARSER=nHeinrich Schuchardt
The hush parser not enabled for some boards, e.g. sipeed_maix_bitm_defconfig. With CONFIG_HUSH_PARSER=n a double quotation mark is not interpreted as the beginning of a string. Use a single quotation mark instead. Furthermore without the hush parser variables have to be referenced as ${varname}. Add the missing braces. Reported-by: Sean Anderson <seanga2@gmail.com> Fixes: 8b86c609b860 ("test/py: add test of basic shell functionality") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-07tests: support mkfs.ext4 without metadata_csumStephen Warren
Modify various test/py filesystem creation routines to support systems that don't implement the metadata_csum ext4 feature. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2020-08-07board: presidio: add LED supportJway Lin
Add LED support for Cortina Access Presidio Engineering Board Signed-off-by: Jway Lin <jway.lin@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> Reviewed-by: Simon Glass <sjg@chromium.org> CC: Simon Glass <sjg@chromium.org>
2020-08-07led: led_cortina: Add CAxxx LED supportJway Lin
Add Cortina Access LED controller support for CAxxxx SOCs Signed-off-by: Jway Lin <jway.lin@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Simon Glass <sjg@chromium.org> Add head file fixed link error and remove unused flashing function Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-07Travis: Add squashfs-toolsTom Rini
So that the tests we now have for squashfs can run, add squashfs-tools for mksquashfs. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-07test/py: Add tests for the SquashFS commandsJoao Marcos Costa
Add Python scripts to test 'ls' and 'load' commands. The scripts generate a SquashFS image and clean the directory after the assertions, or if an exception is raised. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07fs/fs.c: add symbolic link case to fs_ls_generic()Joao Marcos Costa
Adds an 'else if' statement inside the loop to check for symbolic links. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07fs/squashfs: add support for zlib decompressionJoao Marcos Costa
Add call to zlib's 'uncompress' function. Add function to display the right error message depending on the decompression's return value. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07include/u-boot, lib/zlib: add sources for zlib decompressionJoao Marcos Costa
Add zlib (v1.2.11) uncompr() function to U-Boot. SquashFS depends on this function to decompress data from a raw disk image. The actual support for zlib into SquashFS sources will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07fs/squashfs: add filesystem commandsJoao Marcos Costa
Add 'ls' and 'load' commands. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07fs/squashfs: new filesystemJoao Marcos Costa
Add support for SquashFS filesystem. Right now, it does not support compression but support for zlib will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07cmd: Update the memory-search commandSimon Glass
Add various fixes and improvements to this command that were missed in the original version. Unfortunately I forgot to send v2. - Fix Kconfig name - Use a separate variable for the remaining search length - Correct a minor bug - Move into a separate test suite - Add -q flag to the 'quiet' test to test operation when console is enabled - Enable the feature for sandbox Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07test: Add a flag for tests that need console recordingSimon Glass
Allow tests that need console recording to be marked, so they can be skipped if it is not available. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07dm: Rename DM test flags to make them more genericSimon Glass
The test flags used by driver model are currently not available to other tests. Rather than creating two sets of flags, make these flags generic by changing the DM_ prefix to UT_ and moving them to the test.h header. This will allow adding other test flags without confusion. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07console: Always define the console-recording functionsSimon Glass
On boards without console recording these function are currently missing. It is more convenient for them to be present but to return dummy values. That way if we know that a test needs recording, we can check if it is available, and skip the test if not, while avoiding #ifdefs. Update the header file according and adjust console_record_reset_enable() to return an error if recording is not available. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07test: Add a way to check part of a console line or skip itSimon Glass
Some lines of the output are not worth testing, or not worth testing in their entirety. For example, when checking a hex dump we know that the hex-dump routine can display ASCII so we only need to check the hex bytes, not the ASCII dump. Add a new test macros which can check only part of a console line. Sometimes it is useful to skip a line altogether, so add a macro for that also. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07Merge branch '2020-08-07-mkimage-improvements'Tom Rini
- Assorted mkimage improvements related to FIT images and verified boot
2020-08-07mkimage: fit: fix import of external dataPatrick Oppenlander
The external data is located after the mmapped FDT pointed to by 'old_fdt', not in the newly created FDT we are importing into at 'fdt'. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
2020-08-07mkimage: fit: include image cipher in configuration signaturePatrick Oppenlander
This patch addresses issue #2 for signed configurations. -----8<----- Including the image cipher properties in the configuration signature prevents an attacker from modifying cipher, key or iv properties. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-08-07mkimage: fit: don't cipher ciphered dataPatrick Oppenlander
Previously, mkimage -F could be run multiple times causing already ciphered image data to be ciphered again. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-08-07mkimage: fit: handle FDT_ERR_NOSPACE when cipheringPatrick Oppenlander
Also replace fdt_delprop/fdt_setprop with fdt_setprop as fdt_setprop can replace an existing property value. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
generated by cgit (git 2.34.1) at 2025-01-10 03:29:24 +0000