summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-28mmc: Add bcm2835 sdhost controllerAlexander Graf
The BCM2835 family of SoCs has 2 different SD controllers: One based on the SDHCI spec and a custom, home-grown one. This patch implements a driver for the latter based on the Linux driver. This is needed so that we can make use of device trees that assume driver presence of both SD controllers. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28bcm283x: Add pinctrl driverAlexander Graf
The bcm283x family of SoCs have a GPIO controller that also acts as pinctrl controller. This patch introduces a new pinctrl driver that can actually properly mux devices into their device tree defined pin states and is now the primary owner of the gpio device. The previous GPIO driver gets moved into a subdevice of the pinctrl driver, bound to the same OF node. That way whenever a device asks for pinctrl support, it gets it automatically from the pinctrl driver and GPIO support is still available in the normal command line phase. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28powerpc: Drop CONFIG_WALNUT and other related dead codeTuomas Tynkkynen
CONFIG_WALNUT was dropped in June 2017 in: commit 98f705c9cefdfd ("powerpc: remove 4xx support") While at it, the related CONFIG_MACH_SPECIFIC and the have_of and _machine variables are unused as well, so drop them too. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-28libfdt: migrate include/libfdt_env.h to a wrapperMasahiro Yamada
libfdt_env.h is supposed to provide system-dependent defines. scripts/dtc/libfdt/libfdt_env.h from upstream DTC is suitable for user-space, so we should use this for USE_HOSTCC case. For compiling U-Boot, we need to override such system-dependent defines, so use <linux/libfdt_env.h> imported from Linux. <libfdt.h> selects a proper one. Maybe, we should split header inclusion completely, but I do not want too many patches at one. I can rip off the include/libfdt_env.h from HOST_EXTRACFLAGS. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-28libfdt: migrate libfdt.h to a wrapper + U-Boot own codeMasahiro Yamada
There is tons of code duplication between lib/libfdt/libfdt.h and scripts/dtc/libfdt/libfdt.h. Evacuate the U-Boot own code to include/libfdt.h and remove lib/libfdt/libfdt.h. For host tools, <libfdt.h> should include scripts/dtc/libfdt/libfdt.h, which is already suitable for user-space. For compiling U-Boot, <linux/libfdt.h> should be included because we need a different libfdt_env.h . Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-28libfdt: move working_fdt and FDT_RAMDISK_OVERHEAD to include/libfdt.hMasahiro Yamada
libfdt_env.h exists to contain system-dependent defines: - typedef of fdt*_t - fdt*_to_cpu(), cpu_to_fdt* working_fdt and FDT_RAMDISK_OVERHEAD are unrelated to the environment, so they must get out of this header. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-28tools: include necessary headers explicitlyMasahiro Yamada
Several host-tools use "bool" type without including <stdbool.h>. This relies on the crappy header inclusion chain. tools/Makefile has the following line: HOST_EXTRACFLAGS += -include $(srctree)/include/libfdt_env.h \ All host-tools are forced to include libfdt_env.h even if they are totally unrelated to FDT. Then, <stdbool.h> is indirectly included as follows: include/libfdt_env.h -> include/linux/types.h -> <stdbool.h> I am fixing this horrible crap. In advance, I need to add necessary include directives explicitly. tools/fdtgrep.c needs more; <fctl.h> for open() and <errno.h> for errno. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-28libfdt: fix <linux/libfdt.h>Masahiro Yamada
I do not remember why, but this is apparently a file-copy mistake. The file name is libfdt.h, but its content is that of libfdt_env.h Re-import it from upstream Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-28libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.cMasahiro Yamada
The only difference between scripts/dtc/libfdt/fdt_rw.c and lib/libfdt/fdt_rw.c is fdt_remove_unused_strings(). It is only used by fdtgrep, so we do not need to compile it for U-Boot image. Move it to tools/libfdt/fdw_rw.c so that lib/libfdt/fdt_rw.c can be a wrapper of scripts/dtc/libfdt/fdt_rw.c. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-28host-tools: use python2 explicitly for shebangMasahiro Yamada
All of these host tools are apparently written for Python2, not Python3. Use 'python2' in the shebang line according to PEP 394 (https://www.python.org/dev/peps/pep-0394/). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-28ARM: omap3: evm: Fix distro bootcmd UBIFS and MMC supportDerald D. Woods
The omap3_evm board does not boot when commit: a47ca2cf67 ("ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4") is applied after commit: 3dde8f2037 ("Merge git://git.denx.de/u-boot-mmc") This commit reduces the CONFIG_EXTRA_ENV_SETTINGS size and better leverages the existing distro bootcmd infrastructure. - Use updated UBIFS support from config_distro_bootcmd.h - Use LEGACY_MMC naming found in am335x_evm.h and ti_omap4_common.h - Remove extra environment content that is no longer needed [MMC(0:1)/extlinux/extlinux.conf] ---8<------------------------------------------------------------------- default omap3-evm-mmc-fat label omap3-evm-mmc-fat kernel /zImage fdt /omap3-evm.dtb append console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ---8<------------------------------------------------------------------- [MMC(0:2)/boot/extlinux/extlinux.conf] ---8<------------------------------------------------------------------- default omap3-evm-mmc-ext4 label omap3-evm-mmc-ext4 kernel /boot/zImage fdt /boot/omap3-evm.dtb append console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ---8<------------------------------------------------------------------- [NAND(ubi0:rootfs)/boot/extlinux/extlinux.conf] ---8<------------------------------------------------------------------- default omap3-evm-nand-ubifs label omap3-evm-nand-ubifs kernel /boot/zImage fdt /boot/omap3-evm.dtb append console=ttyO0,115200n8 root=ubi0:rootfs rw ubi.mtd=rootfs noinitrd rootfstype=ubifs rootwait ---8<------------------------------------------------------------------- Fixes: a47ca2cf67 ("ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4") Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-28distro bootcmd: Allow board defined UBI partition and volume namesDerald D. Woods
This commit allows overriding the default assumption that the boot UBI MTD partition is named 'UBI' and the UBI volume is 'boot'. A board desiring to use a legacy or alternative NAND layout can now define the following two extra environment variables: bootubipart=<some_ubi_partition_name> bootubivol=<some_ubi_volume_name> EXAMPLE: [include/configs/some_board.h] ---8<------------------------------------------------------------------- [...] #include <config_distro_defaults.h> #define MEM_LAYOUT_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV #define BOOT_TARGET_DEVICES(func) \ func(UBIFS, ubifs, 0) #include <config_distro_bootcmd.h> [...] #define CONFIG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ "bootubivol=rootfs\0" \ "bootubipart=rootfs\0" \ BOOTENV [...] ---8<------------------------------------------------------------------- Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-28spl: use different BOARD_INIT MACRO for spl and tplKever Yang
SPL and TPL may not always need spl_board_init() at the same time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28fs: btrfs: Fix unaligned memory accessesAlberto Sánchez Molero
Loading files stored with lzo compression from a btrfs filesystem was producing unaligned memory accesses, which were causing a data abort and a reset on an Orange Pi Zero. The change in hash.c is not triggered by any error but follows the same pattern. Please confirm. Fixed according to doc/README.unaligned-memory-access.txt Signed-off-by: Alberto Sánchez Molero <alsamolero@gmail.com> Tested-by: Robert Nelson <robertcnelson@gmail.com>
2018-01-28spl: atf: pass NULL for bl32_ep pcKever Yang
ATF use bl32_ep_info->pc to decide if thre is an available bl32, let's mark it as NULL first. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: rk3036: enable rockusb support on rk3036 based deviceEddie Cai
Rockchip Rockusb driver already merged. So we enable rockusb support on rk3036 based device. Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: dts: rk3128: update pwm-cell for pwm0Kever Yang
The backlight pwm-cell is 3. This remove the warning in buildman: arch/arm/dts/rk3126-evb.dtb: Warning (pwms_property): Property 'pwms', cell 3 is not a phandle reference in /backlight arch/arm/dts/rk3126-evb.dtb: Warning (pwms_property): Missing property '#pwm-cells' in node /sram@10080400 or bad phandle (referred from /backlight:pwms[3]) Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: clk: guard set_parent implementations against OF_PLATDATAPhilipp Tomsich
The set_parent implementations do not make sense when OF_PLATDATA is enabled. We guard these against OF_PLATDATA and don't populate the set_parent-op when this is the case. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28clk: rockchip: clk_rk3368: Implement "assign-clock-parent"David Wu
Implement the setting parent for gmac clock, and add internal pll div set for mac clk. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and ↵David Wu
"assign-clock-rate" The RK3288 CRU-node assigns rates to a number of clocks that are not implemented in the RK3288 clock-driver (but which have been sufficiently initialised from rkclk_init()): for these clocks, we implement the gmac clock set parent, but simply ignore the others' set_rate() operation and return 0 to signal success. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28ARM: dts: rk3288: Remove unused LCDC clock assignedDavid Wu
The LCDC assigned rate is 0, it will make boot error, error log:"pll_para_config: the frequency can not be 0 Hz". Remove them, and the lcdc driver will do the correct clock rate setting. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28config: evb-rk3229: Enable rk gmac configsDavid Wu
Add gmac config support for rk3229 evb. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28net: gmac_rockchip: Add support for the RK3228 GMACDavid Wu
The GMAC in the RK3228 once again is identical to the incarnation in the RK3288 and the RK3399, except for where some of the configuration and control registers are located in the GRF. This adds the RK3368-specific logic necessary to reuse this driver. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28clk: rockchip: Add rk322x gamc clock supportDavid Wu
Assuming mac_clk is fed by an external clock, set clk_rmii_src clock select control register from IO for rgmii interface. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: Add rk322x gmac pinctrl supportDavid Wu
Set gmac pins iomux and rgmii tx pins to 12ma drive-strength, clean others to 2ma. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driverDavid Wu
Clean the iomux definitions at grf_rk322x.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. After that, define the uart2 iomux at rk322x-board file. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evbDavid Wu
Add rk3328-evb gmac support. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: dts: rk3328: Add gmac2io supportDavid Wu
Add basic dts configuration for rk3328 gmac2io. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: configs: Enable GMAC configs for evb-rk3328David Wu
Enable GMAC configs for evb-rk3328 Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28net: gmac_rockchip: Add rk3328 gmac supportDavid Wu
The GMAC2IO in the RK3328 once again is identical to the incarnation in the RK3288 and the RK3399, except for where some of the configuration and control registers are located in the GRF. This adds the RK3328-specific logic necessary to reuse this driver. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28clk: rockchip: Add rk3328 gamc clock supportDavid Wu
The rk3328 soc has two gmac controllers, one is gmac2io, the other is gmac2phy. We use the gmac2io rgmii interface for 1000M phy here. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: Add rk3328 gmac pinctrl supportDavid Wu
Need to set gmac m1 pins iomux, gmac m0 tx pins, select bit2 and bit10 at com iomux register. After that, set rgmii m1 tx pins to 12ma drive-strength, and clean others to 2ma. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driverDavid Wu
Clean the iomux definitions at grf_rk3328.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28net: gmac_rockchip: Add support for the RV1108 GMACDavid Wu
The rv1108 GMAC only support rmii interface, so need to add the set_rmii() ops. Use the phy current interface to set rmii or rgmii ops. At the same time, need to set the mac clock rate of rmii with 50M, the clock rate of rgmii with 125M. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driverDavid Wu
If we include both the rk3288_grf.h and rv1108_grf.h, it will cause the conflicts of redefinition. Clean the iomux definitions at grf_rv1108.h, and move them into pinctrl-driver. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: grf_rv1108.h: Fix the grf offsetsDavid Wu
The last 4 grf registers offset of rv1108 are wrong, fix them for correct usage. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evbDavid Wu
If the Ethernet address is not set, the network can't work, enable the random address config for default use. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission qualityDavid Wu
Give the mac controller the correct tx-delay and rx-delay value for the rgmii mode transmission. If they are not matched, there would be Ethernet packets lost, the net feature may not work. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: clk: rk3399: accept all assigned-clocks from the 'cru'-nodePhilipp Tomsich
The RK3399 CRU-node assigns rates to a number of clocks that are not implemented in the RK3399 clock-driver (but which have been sufficiently initialised from rkclk_init()): for these clocks, we simply ignore the set_rate() operation and return 0 to signal success. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: David Wu <david.wu@rock-chips.com> Series-changes: 2 - Fixed David's email address.
2018-01-28clk: implement clk_set_defaults()Philipp Tomsich
Linux uses the properties 'assigned-clocks', 'assigned-clock-parents' and 'assigned-clock-rates' to configure the clock subsystem for use with various peripheral nodes. This implements clk_set_defaults() and hooks it up with the general device probibin in drivers/core/device.c: when a new device is probed, clk_set_defaults() will be called for it and will process the properties mentioned above. Note that this functionality is designed to fail gracefully (i.e. if a clock-driver does not implement set_parent(), we simply accept this and ignore the error) as not to break existing board-support. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: David Wu <david.wu@rock-chips.com> Series-changes: 2 - Fixed David's email address. Series-version: 2 Cover-letter: clk: support assigned-clock, assigned-clock-parents, assigned-clock-rates For various peripherals on Rockchip SoCs (e.g. for the Ethernet GMAC), the parent-clock needs to be set via the DTS. This adds the required plumbing and implements the GMAC case for the RK3399. END
2018-01-28rockchip: clk: rk3399: implement set_parent() operationPhilipp Tomsich
This implements the (newly added) set_parent() operation for the RK3399 with a focus on allowing the RGMII clock parent to be configured via the assigned-clock-parents property of the GMAC node. This implementation supports only the GMAC (in fact only the RGMII clock parent) and allows to set this clock's parent either to the internal SCLK_GMAC or to an external clock input (identifiable by it providing a 'clock-output-name' of "gmac_clkin"). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: David Wu <david.wu@rock-chips.com> Series-changes: 2 - Fixed David's email address.
2018-01-28clk: refactor clk_get_by_index() into clk_get_by_indexed_prop()Philipp Tomsich
The logic in clk_get_by_index() may be useful for other properties than 'clocks': e.g. 'assigned-clocks' and 'assigned-clock-parents' follows the same model. This commit refactors clk_get_by_index() by introducing an internal function clk_get_by_indexed_prop() that allows to specify the name of the property to process. The original clk_get_by_index() call is simply directed through this helper function with the property name fixed to "clocks". Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: David Wu <david.wu@rock-chips.com> Series-changes: 2 - Fixed David's email address.
2018-01-28clk: add clk_set_parent()Philipp Tomsich
Clocks may support multiple parents: this change introduces an optional operation on the clk-uclass to set a clock's parent. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: David Wu <david.wu@rock-chips.com> Series-changes: 2 - Fixed David's email address.
2018-01-28clk: clk_stm32f: Fix PLLSAICFGR_PLLSAIP_4 divider valuePatrice Chotard
PLLSAIP divider uses 2 bits (bits 16 and 17) into RCC_PLLSAICFGR register, available combination are : 00: PLLSAIP = 2 01: PLLSAIP = 4 10: PLLSAIP = 6 11: PLLSAIP = 8 Previously, the divider value was incorrectly set to 6. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-28ARM: AM43XX: Call hw_data_init() again after relocation to update *ctrlFaiz Abbas
hw_data_init() is called before relocation to initialise hardware data. Since ctrl is initialized to OMAP_SRAM_SCRATCH_SYS_CTRL in arch/arm/mach-omap2/am33xx/hw_data.c, the pointer *ctrl will not be updated during relocation and will hold a stale value. Therefore call hw_data_init() again after relocation to reinitialize *ctrl. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-01-28configs: Replace CONFIG_ISW_ENTRY_ADDR with CONFIG_SYS_TEXT_BASEFaiz Abbas
Since 7e0ed13 ("Convert ARCH_OMAP2PLUS boards' CONFIG_SYS_TEXT_BASE to Kconfig"), a default SYS_TEXT_BASE was set for all ARCH_OMAP2PLUS devices. CONFIG_ISW_ENTRY_ADDR is used to set SYS_TEXT_BASE in qspi boot. Simplify this by directly assigning SYS_TEXT_BASE in the defconfig. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-01-28tools: remove unused retJelle van der Waa
Remove unused ret from fw_env_flush. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-28clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()Patrice Chotard
Move SYSCFG clock setup into configure_clocks() instead of calling clock_setup() from board file. As this clock is only needed in case of ethernet enabled and as both stm32f4 and stm32f7 are using the Designware ethernet IP, we use CONFIG_ETH_DESIGNWARE to only enable this clock if needed. Move the RMII setup from board_early_init_f() to board_init() to insure that RMII bit is set only when clock driver is initialized. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-28clk: clk_stm32f: Remove STMMAC clock setupPatrice Chotard
Thanks to 'commit ba1f96672522 ("net: designware: add clock support")' we don't need anymore to setup the STMMAC clock in board. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-28ARM: dts: stm32: Add STMMAC clocks for stm32f746Patrice Chotard
Add ETHMAC, ETHMACRX and ETHMACTX clocks for STMMAC. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
generated by cgit (git 2.34.1) at 2025-01-24 11:17:14 +0000