summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-14arm:trats:pmic: Power consumption reduction state for Samsung's TRATS boardŁukasz Majewski
When charging battery is necessary, the development board needs to be turned into low power mode for better efficiency. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2012-11-14pmic:max8997: Support for MAX8997 internal charger controlŁukasz Majewski
Support for MAX8997 built-in charger. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2012-11-14arm:trats:pmic: Enable battery support at Samsung's TRATS boardŁukasz Majewski
Support for TRATS battery has been added. It is treated as a "normal" power related device and thereof controlled by pmic/power subsystem. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2012-11-14arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS boardŁukasz Majewski
FG IC built into the MAX8997 device (compliant to MAX17042) is enabled at TRATS. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2012-11-14arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS boardŁukasz Majewski
MUIC IC built into the MAX8997 device is enabled at TRATS. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2012-11-14arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS boardŁukasz Majewski
Default PMIC (MAX8997) initialization for Samsung's TRATS development board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2012-11-14pmic:max8997: Function for calculating LDO internal register valueŁukasz Majewski
Function for calculating LDO internal register value from passed micro Volt. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2012-11-14pmic:fuel-gauge: Support for MAX17042 fuel-gaugeŁukasz Majewski
Support for MAX17042 fuel-gauge (FG), which is built into the MAX8997 power management device. Special file - fg_battery_cell_params.h with cells characteristics added. The FG device will work with redesigned PMIC framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2012-11-14pmic:muic: Support for MUIC built into MAX8997 deviceŁukasz Majewski
Support for MUIC (Micro USB Integrated Circuit) built into the MAX8997 power management device. The MUIC device will work with redesigned PMIC framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2012-11-14pmic:battery: Support for Trats Battery at PMIC frameworkŁukasz Majewski
Trats battery is now treated in the same way as other power related devices. This approach allows for more unified handling of all devices responsible for power management. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2012-11-14pmic: Extend struct pmic to support battery and charger related operationsŁukasz Majewski
Now it is possible to provide specific function per PMIC/power device instance. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-14pmic: Move pmic related code to ./drivers/power directoryŁukasz Majewski
The PMIC framework has been moved to its more natural place ./drivers/power from ./drivers/misc directory. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-14pmic:chrg: Common information about charger and battery (power_chrg.h)Łukasz Majewski
New power_chrg.h file has been added to "bind" together common information about charging battery available in the system. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2012-11-14pmic: Enable power_board_init() support at TRATSŁukasz Majewski
Enable support for power_board_init() method at TRATS board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2012-11-14pmic: Introduce power_init_board() method at ./lib/board.c fileŁukasz Majewski
It is necessary to introduce a new system wide function- power_init_board() It turns out, that power initialization must be done as early as possible. In the case of PMIC framework redesign, which aims to support multiple instances of PMIC devices the initialization shall be performed just after malloc configuration. The power_init_board function is a weak function with default implementation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-14pmic: Extend PMIC framework to support multiple instances of PMIC devicesŁukasz Majewski
The PMIC framework has been extended to support multiple instances of the variety of devices responsible for power management. This change allows supporting of e.g. fuel gauge, charger, MUIC (Micro USB Interface Circuit). Power related includes have been moved to ./include/power directory. This is a first of a series of patches - in the future "pmic" will be replaced with "power". Two important issues: 1. The PMIC needs to be initialized just after malloc is configured 2. It uses list to hold information about available PMIC devices Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2012-11-14pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2CŁukasz Majewski
PMIC MAX8997 is now ready to work with single and multibus soft I2C implementation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-14pmic:i2c: Add I2C sensor byte order (big/little) to PMIC frameworkŁukasz Majewski
Since the pmic_reg_read is the u32 value, the order in which bytes are placed to form u32 value is important. Support for big and little sensor endianess is added. Moreover calls to [leXX|beXX]_to_cpu have been added to support little and big endian SoCs. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-14pmic:i2c: Handle PMIC I2C transmission comprising of two bytesŁukasz Majewski
This patch adds support for proper handling of a PMIC I2C transmission comprising of two bytes. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2012-11-14nand_spl: fix u-boot.lst breakageScott Wood
Commit 97b24d3d51a92cb8c0c1e1a74abf22fe1a1807a3 "common: Add symbol handling for generic lists into Makefile" introduced build errors in many nand_spl targets, complaining of a missing u-boot.lst. When not doing an out-of-tree build, $(obj) expands to nothing, so GCC ended up being given -I with no argument (or rather, -ansi was the argument). The failure didn't show up during a -j1 build because it was picking up the non-SPL version of u-boot.lst. Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-11-14Makefile: silence 'make clean'Andreas Bießmann
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de>
2012-11-14patman: Issue empty change logs for unchanged patchesSimon Glass
Often a particular patch may change only for some versions of a series. For versions where there is no change, issue a change log indicating that (for example 'Changes in v4: None'). For such lines, don't add a blank line afterwards, to conserve space. Use list.insert() instead of list = [item] + list. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stefan Roese <sr@denx.de>
2012-11-12fdt: Remove fdtdec_find_alias_node() functionSimon Glass
This function is not needed, since fdt_path_offset() performs the same service. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Set kernaddr if fdt indicates a kernel is presentSimon Glass
If kernel-offset is specified in the fdt, set an environment variable so that scripts can access the attached kernel. This can be used by a packaging program to tell U-Boot about a kernel that has been downloaded alongside U-Boot. The value in the fdt is the offset of the kernel from the start of the U-Boot image, so we can find it just by adding CONFIG_SYS_TEXT_BASE. It is then fairly easy to put something like this in the environment variables in the board header file: "if test ${kernaddr} != \"\"; then "\ "echo \"Using bundled kernel\"; "\ "bootm ${kernaddr};" \ "fi; "\ /* rest of boot sequence follows here */ Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Add option to default to most compatible conf in a fit imageGabe Black
When booting a fit image with multiple configurations, the user either has to specify which configuration to use explicitly, or there has to be a default defined which is chosen automatically. This change adds an option to change that behavior so that a configuration can be selected explicitly, or the configuration which has the device tree that claims to be compatible with the earliest item in U-Boot's device tree. In other words, if U-Boot claimed to be compatible with A, B, and then C, and the configurations claimed to be compatible with A, D and B, D and D, E, the first configuration, A, D, would be chosen. Both the first and second configurations match, but the first one matches a more specific entry in U-Boot's device tree. The order in the kernel's device tree is ignored. Signed-off-by: Gabe Black <gabeblack@google.com> Commit-Ready: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Allow device tree to specify secure bootingDoug Anderson
When secure booting is chosen: * The u-boot shell is never invoked during boot--we just do a simple table lookup to find the command. This means we could even remove the shell parsing from u-boot and still be able to boot. * The boot command can't be interruped. * Failure doesn't cause us to fall back to the shell. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Tell the FDT library where the device tree isGabe Black
This change adds a call to set_working_fdt_addr near the end of u-boot initialization which tells the fdt command/library where the device tree is. This makes it possible to use the fdt command to look at the active device tree since otherwise there would be no way to know what address it was at to set things up manually. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Load boot command from device treeChe-Liang Chiou
Load boot command from /config/bootcmd of device tree if present. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Add polarity-aware gpio functions to fdtdecSean Paul
Add get and set gpio functions to fdtdec that take into account the polarity field in fdtdec_gpio_state.flags. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Add fdtdec_get_uint64 to decode a 64-bit value from a propertyChe-Liang Chiou
It decodes a 64-bit value from a property that is at least 8 bytes long. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Add function to read boolean propertyGabe Black
Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Commit-Ready: Vincent Palatin <vpalatin@chromium.org> Commit-Ready: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Export fdtdec_lookup() and fix the nameGerald Van Baren
The name of this function is not consistent, so fix it, and export the function for external use. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Add function for decoding multiple gpios globally availableAbhilash Kesavan
Samsung's SDHCI bindings require multiple gpios to be parsed and configured at a time. Export the already available fdtdec_decode_gpios for this purpose. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Commit-Ready: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Add fdtdec_decode_region() to decode memory regionSimon Glass
A memory region has a start and a size and is often specified in a node by a 'reg' property. Add a function to decode this information from the fdt. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Add function to get a config string from device treeSimon Glass
Add a function to look up a configuration string such as board name and returns its value. We look in the "/config" node for this. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12fdt: Add function to get config int from device treeAbhilash Kesavan
Add a function to look up a configuration item such as machine id and return its value. Note: The code has been taken as is from the Chromium u-boot development tree and needs Simon Glass' sign-off. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-10video: atmel: implement lcd_setcolreg functionBo Shen
implement the common api lcd_setcolreg in include/lcd.h Signed-off-by: Bo Shen <voice.shen@atmel.com> [agust: fixed commit log and gcc 4.6 -Wparentheses warnings] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-11-10nios2: remove asm/status_led.hThomas Chou
The file has a wrong inline keyword of __led_toggle(), which causes compilation error. And its content is defined in common status_led.h. So define CONFIG_BOARD_SPECIFIC_LED in board config files and remove this header file. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2012-11-10nios2: use builtin functions for control registers accessThomas Chou
The commit 51926d5ee0be029fb45f10f42756df97279f8ad3 COMMON: Use __stringify() instead of rest of implementations forgot to update the wrctl funtion, and causes compilation error. But there are builtin functions for control registers access in nios2 comipiler. It is convenient to use them instead. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Cc: Marek Vasut <marex@denx.de>
2012-11-09Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini
2012-11-08common/command.c: revert changes from commit 199adb60Anatolij Gustschin
commit 199adb601ff34bdbbd0667fac80dfe0a87bffc2b "common/misc: sparse fixes" broke the help command trying to fix the sparse error "command.c:44:38: error: bad constant expression". As Henrik points out, the fix was bad because the commit used CONFIG_SYS_MAXARGS whereas the code intended to use the maximum number of commands (not arguments to a command). Revert command.c changes to the original code as asked by Wolfgang. Reported-by: Henrik Nordström <henrik@henriknordstrom.net> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-11-08microblaze: Fix compilation failure because of missing libdtsMichal Simek
Microblaze platform can use CONFIG_OF_EMBED option but also it is necessary to support boards which don't want to use this option. U-Boot doesn't compile dts/libdts.o for #undef CONFIG_OF_EMBED case that's why it should be guarded by ifdef. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-11-07microblaze: Remove asm/bitops.h from asm/posix_types.hMichal Simek
The patch "include/linux/byteorder: import latest endian definitions from linux" (sha1: eef1cf2d5cf1cae5fb76713e912263dedf110aeb) Introduced a lot of compilation failures with unknow types. include/linux/byteorder/big_endian.h:45:1: error: unknown type name '__le64' include/linux/byteorder/big_endian.h: In function '__cpu_to_le64p': include/linux/byteorder/big_endian.h:47:18: error: '__le64' undeclared (first use in this function) include/linux/byteorder/big_endian.h:47:18: note: each undeclared identifier is reported only once for each function it appears in include/linux/byteorder/big_endian.h:47:25: error: expected ';' before '__swab64p' include/linux/byteorder/big_endian.h: At top level: include/linux/byteorder/big_endian.h:49:1: error: unknown type name '__le64' include/linux/byteorder/big_endian.h:53:1: error: unknown type name '__le32' include/linux/byteorder/big_endian.h: In function '__cpu_to_le32p': include/linux/byteorder/big_endian.h:55:18: error: '__le32' undeclared (first use in this function) include/linux/byteorder/big_endian.h:55:25: error: expected ';' before '__swab32p' include/linux/byteorder/big_endian.h: At top level: include/linux/byteorder/big_endian.h:57:1: error: unknown type name '__le32' include/linux/byteorder/big_endian.h:61:1: error: unknown type name '__le16' ... Removing asm/bitops.h solved this problem. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-11-07microblaze: Flush caches before enabling themMichal Simek
Flushing caches is necessary because of soft reset which doesn't clear caches. Signed-off-by: Michal Simek <monstr@monstr.eu> Reviewed-by: Marek Vasut <marex@denx.de>
2012-11-07microblaze: Fix byteorder for microblazeMichal Simek
Just remove ancient code. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net> Reviewed-by: Marek Vasut <marex@denx.de>
2012-11-07microblaze: Fix compilation warning in ext2_find_next_zero_bitMichal Simek
ext2_find_next_zero_bit must be also static if __swab32 is also static. Warning: include/asm/bitops.h:369:22: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static [enabled by default] Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net>
2012-11-07MAKEALL: Add spear platform target to compile all SPEAr boardsStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2012-11-07video: Skip bitmaps which do not fit into the screen in cfb_consoleVadim Bendebury
The cfb console driver is trying to prevent bitmaps to spill over the screen, but the calculations assume that at least part of the bitmap fits into the screen area. In reality there could be bitmap elements which are completely out of the screen area, they just need to be discarded. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-07lcd: Implement RLE8 bitmap decodingTom Wai-Hong Tam
Add support for drawing compressed RLE8 bitmaps. Reference: http://www.digicamsoft.com/bmp/bmp.html Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Che-Liang Chiou <clchiou@chromium.org> [agust: fix some minor style issues and build warnings] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-11-07lcd: Fix BMP decode bug that skips the wrong padded rowTom Wai-Hong Tam
This change fixed 2 things: - Rename padded_line to padded_width since it is (width + padded_row) not line. - When finished a line, should skip the padded_row that is (padded_width - width) instead of (width - padded_width). Reference: http://en.wikipedia.org/wiki/BMP_file_format Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>