summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-09board: toradex: verdin-imx8mm: add READMEIgor Opaniuk
Add README with build steps for U-boot and TF-A for Verdin iMX8M Mini SoM. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-09board: toradex: Add Verdin iMX8M Mini supportIgor Opaniuk
This adds initial minimal support for the Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A module. They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Mini USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) Normal Boot Trying to boot from MMC1 NOTICE: Configuring TZASC380 NOTICE: RDC off NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty NOTICE: BL31: Built : 01:11:41, Jan 25 2020 NOTICE: sip svc init U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Reset cause: POR DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149 Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-09toradex: tdx-cfg-block: add Verdin iMX8M Mini/Nano supportMarcel Ziswiler
Add support for storing configuration for Verdin iMX8M Mini and Nano SoMs in Toradex config block. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-09toradex: tdx-cfg-block: add Apalis iMX8X supportMarcel Ziswiler
Add support for storing configuration for Apalis iMX8X SoM in Toradex config block. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-09arm: dts: imx8mm-pinfunc: sync latest linux-next pin func headerMarcel Ziswiler
Synchronise with latest linux-next kernel pin func header file. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-07Merge branch '2020-02-07-master-imports'Tom Rini
- 2 FAT fixes. - MediaTek ethernet support improvement. - Initial Cortina Access CAxxxx family support. - Correct return value of do_gpio() and so gpio shell command.
2020-02-07board: presidio-asic: Add basic G3 engr. development board supportAlex Nemirovsky
Add basic Presidio G3 engineering board support Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07serial: serial_cortina: add UART DM driver for CAxxxx SoCsJason Li
Add serial UART driver support for all Cortina Access CAxxxx family of SoCs. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Jason Li <jason.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07watchdog: cortina_wdt: add support for HW WDT on CAxxxx SoCsJason Li
Add support for hardware watchdog timer on all Cortina Access CAxxxx family of SoCs. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Jason Li <jason.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07gpio: cortina_gpio: add DM_GPIO driver for CAxxxx SoCsJason Li
DM_GPIO based GPIO controller driver for CAxxxx SoCs. This driver support multiple CPU architectures and Cortina Access SoC platforms. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Jason Li <jason.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07gpio: do not include <asm/arch/gpio.h> for Cortina CAxxxx SoCsJason Li
The Cortina CAxxxx GPIO driver maintains DM_GPIO support across different CPU ISA in the CAxxxx Soc Family; Not just ARM. Therefore, it is not desirable to split out and maintain separete gpio header file for each CPU architecture. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jason Li <jason.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc.Alex Nemirovsky
Assign Alex Nemirovsky as custodian for all Cortina Access (CA) for ARM and MIPS based SoCs. Currently Cortina Access CAxxxx family of SoCs support both ARM and MIPS ISA. Drivers have cross platform support for both architectures. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07mpc8xx: Expose show_regs()Tom Rini
To match the other PowerPC platforms the function show_regs() must not be marked static but instead be an exposed global function. Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Christophe Leroy <christophe.leroy@c-s.fr>
2020-02-07cmd/elf.c: Add SPDX tagTom Rini
Based on reading the text of the license comment this appears to be the BSD-2-Clause license but with an imperfect word match as BSD-2-Clause was not (as far as I recall) a common license choice at the time the code was written. Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-07configs: mediatek: enable mt7622 ethernet supportMarkLee
This patch enable mt7622 ethernet support in its defconfig Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
2020-02-07eth: mtk-eth: aarch64: fix build warnings on ethernet-driverFrank Wunderlich
building mtk ethernet driver for aarch64 (mt7622) results in warnings/errors "error: cast from pointer to integer of different size" Fixes: 23f17164d9 ("ethernet: MediaTek: add ethernet driver for MediaTek ARM-based SoCs") Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-02-07arm: dts: mediatek: add ethernet and sgmii dts node for mt7622MarkLee
This patch add eth and sgmii dts node for mt7622 to support ethernet Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
2020-02-07eth: mtk-eth: add mt7622 support in mediatek eth driverMarkLee
This patch add mt7622 support in mediatek eth driver Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
2020-02-07eth: mtk-eth: add sgmii mode support in mediatek eth driverMarkLee
This patch add sgmii init part for the mediatek SoC that support sgmii mode. It is a must for mt7622. Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
2020-02-07fat: write: adjust data written in each partial writeMarek Szyprowski
The code for handing file overwrite incorrectly calculated the amount of data to write when writing to the last non-cluster aligned chunk. Fix this by ensuring that no more data than the 'filesize' is written to disk. While touching min()-based calculations, change it to type-safe min_t() function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> This patch finally fixes the issue revealed by the test script from the previous patch. The correctness of the change has been also verified by the following additional test scripts: --->8-fat_test2.sh--- #!/bin/bash make sandbox_defconfig make dd if=/dev/zero of=/tmp/10M.img bs=1024 count=10k mkfs.vfat -v /tmp/10M.img cat >/tmp/cmds <<EOF x host bind 0 /tmp/10M.img fatls host 0 mw 0x1000000 0x0a434241 0x1000 # "ABC\n" mw 0x1100000 0x0a464544 0x8000 # "DEF\n" fatwrite host 0 0x1000000 file0001.raw 0x1000 fatwrite host 0 0x1000000 file0002.raw 0x1000 fatwrite host 0 0x1000000 file0003.raw 0x1000 fatwrite host 0 0x1000000 file0004.raw 0x1000 fatwrite host 0 0x1000000 file0005.raw 0x1000 fatrm host 0 file0002.raw fatrm host 0 file0004.raw fatls host 0 fatwrite host 0 0x1100000 file0007.raw 0x2000 fatwrite host 0 0x1100000 file0007.raw 0x1f00 reset EOF ./u-boot </tmp/cmds #verify rm -r /tmp/result /tmp/model mkdir /tmp/result mkdir /tmp/model yes ABC | head -c 4096 >/tmp/model/file0001.raw yes ABC | head -c 4096 >/tmp/model/file0003.raw yes ABC | head -c 4096 >/tmp/model/file0005.raw yes DEF | head -c 7936 >/tmp/model/file0007.raw mcopy -n -i /tmp/10M.img ::file0001.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0003.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0005.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0007.raw /tmp/result hd /tmp/10M.img if diff -urq /tmp/model /tmp/result then echo Test okay else echo Test fail fi --->8-fat_test3.sh--- #!/bin/bash make sandbox_defconfig make dd if=/dev/zero of=/tmp/10M.img bs=1024 count=10k mkfs.vfat -v /tmp/10M.img cat >/tmp/cmds <<EOF x host bind 0 /tmp/10M.img fatls host 0 mw 0x1000000 0x0a434241 0x1000 # "ABC\n" mw 0x1100000 0x0a464544 0x8000 # "DEF\n" fatwrite host 0 0x1000000 file0001.raw 0x1000 fatwrite host 0 0x1000000 file0002.raw 0x1000 fatwrite host 0 0x1000000 file0003.raw 0x1000 fatwrite host 0 0x1000000 file0004.raw 0x1000 fatwrite host 0 0x1000000 file0005.raw 0x1000 fatrm host 0 file0002.raw fatrm host 0 file0004.raw fatls host 0 fatwrite host 0 0x1100000 file0007.raw 0x2000 fatwrite host 0 0x1100000 file0007.raw 0x2100 reset EOF ./u-boot </tmp/cmds #verify rm -r /tmp/result /tmp/model mkdir /tmp/result mkdir /tmp/model yes ABC | head -c 4096 >/tmp/model/file0001.raw yes ABC | head -c 4096 >/tmp/model/file0003.raw yes ABC | head -c 4096 >/tmp/model/file0005.raw yes DEF | head -c 8448 >/tmp/model/file0007.raw mcopy -n -i /tmp/10M.img ::file0001.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0003.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0005.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0007.raw /tmp/result hd /tmp/10M.img if diff -urq /tmp/model /tmp/result then echo Test okay else echo Test fail fi --->8-fat_test4.sh--- #!/bin/bash make sandbox_defconfig make dd if=/dev/zero of=/tmp/10M.img bs=1024 count=10k mkfs.vfat -v /tmp/10M.img cat >/tmp/cmds <<EOF x host bind 0 /tmp/10M.img fatls host 0 mw 0x1000000 0x0a434241 0x1000 # "ABC\n" mw 0x1100000 0x0a464544 0x8000 # "DEF\n" mw 0x1200000 0x0a494847 0x8000 # "GHI\n" fatwrite host 0 0x1000000 file0001.raw 0x1000 fatwrite host 0 0x1000000 file0002.raw 0x1000 fatwrite host 0 0x1000000 file0003.raw 0x1000 fatwrite host 0 0x1000000 file0004.raw 0x1000 fatwrite host 0 0x1000000 file0005.raw 0x1000 fatrm host 0 file0002.raw fatrm host 0 file0004.raw fatls host 0 fatwrite host 0 0x1100000 file0007.raw 0x900 fatwrite host 0 0x1200000 file0007.raw 0x900 0x900 fatwrite host 0 0x1100000 file0007.raw 0x900 0x1200 fatwrite host 0 0x1200000 file0007.raw 0x900 0x1b00 reset EOF ./u-boot </tmp/cmds #verify rm -r /tmp/result /tmp/model mkdir /tmp/result mkdir /tmp/model yes ABC | head -c 4096 >/tmp/model/file0001.raw yes ABC | head -c 4096 >/tmp/model/file0003.raw yes ABC | head -c 4096 >/tmp/model/file0005.raw yes DEF | head -c 2304 >/tmp/model/file0007.raw yes GHI | head -c 2304 >>/tmp/model/file0007.raw yes DEF | head -c 2304 >>/tmp/model/file0007.raw yes GHI | head -c 2304 >>/tmp/model/file0007.raw mcopy -n -i /tmp/10M.img ::file0001.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0003.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0005.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0007.raw /tmp/result hd /tmp/10M.img if diff -urq /tmp/model /tmp/result then echo Test okay else echo Test fail fi --->8--- Feel free to prepare a proper sandbox/py_test based tests based on the provided test scripts.
2020-02-07fat: write: fix broken write to fragmented filesMarek Szyprowski
The code for handing file overwrite incorrectly assumed that the file on disk is always contiguous. This resulted in corrupting disk structure every time when write to existing fragmented file happened. Fix this by adding proper check for cluster discontinuity and adjust chunk size on each partial write. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> This patch partially fixes the issue revealed by the following test script: --->8-fat_test1.sh--- #!/bin/bash make sandbox_defconfig make dd if=/dev/zero of=/tmp/10M.img bs=1024 count=10k mkfs.vfat -v /tmp/10M.img cat >/tmp/cmds <<EOF x host bind 0 /tmp/10M.img fatls host 0 mw 0x1000000 0x0a434241 0x1000 # "ABC\n" mw 0x1100000 0x0a464544 0x8000 # "DEF\n" fatwrite host 0 0x1000000 file0001.raw 0x1000 fatwrite host 0 0x1000000 file0002.raw 0x1000 fatwrite host 0 0x1000000 file0003.raw 0x1000 fatwrite host 0 0x1000000 file0004.raw 0x1000 fatwrite host 0 0x1000000 file0005.raw 0x1000 fatrm host 0 file0002.raw fatrm host 0 file0004.raw fatls host 0 fatwrite host 0 0x1100000 file0007.raw 0x4000 fatwrite host 0 0x1100000 file0007.raw 0x4000 reset EOF ./u-boot </tmp/cmds #verify rm -r /tmp/result /tmp/model mkdir /tmp/result mkdir /tmp/model yes ABC | head -c 4096 >/tmp/model/file0001.raw yes ABC | head -c 4096 >/tmp/model/file0003.raw yes ABC | head -c 4096 >/tmp/model/file0005.raw yes DEF | head -c 16384 >/tmp/model/file0007.raw mcopy -n -i /tmp/10M.img ::file0001.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0003.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0005.raw /tmp/result mcopy -n -i /tmp/10M.img ::file0007.raw /tmp/result hd /tmp/10M.img if diff -urq /tmp/model /tmp/result then echo Test okay else echo Test fail fi --->8--- Overwritting a discontiguous test file (file0007.raw) no longer causes corruption to file0003.raw, which's data lies between the chunks of the test file. The amount of data written to disk is still incorrect, what causes damage to the file (file0005.raw), which's data lies next to the test file. This will be fixed by the next patch. Feel free to prepare a proper sandbox/py_test based tests based on the provided test scripts.
2020-02-07cmd: gpio: Correct do_gpio() return valueLuka Kovacic
Use the correct return value in function do_gpio() and update commands documentation with the return values from command_ret_t enum. CMD_RET_SUCCESS is returned on command success and CMD_RET_FAILURE is returned on command failure. The command was returning the pin value, which caused confusion when debugging (#define DEBUG). Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Tested-by: Robert Marko <robert.marko@sartura.hr>
2020-02-07azure/gitlab: Update to Docker to have SDL2 availableTom Rini
Update to a newer Docker image that contains SDL2 libraries as required by recent Sandbox changes. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-07azure: Use our own GRUB binariesTom Rini
Use the same logic from 24df1b14f3ab to use our own GRUB binaries in Azure pipelines as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-07gitlab: use our own GRUBHeinrich Schuchardt
Up to now we have been relying on openSUSE repositories for GRUB on arm and arm64 though we have included GRUB in our Docker image. Use the GRUB included in our Docker image. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-07x86: coral: Enable TPMSimon Glass
Enable TPM2 so that we can use cr50. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07tpm: Add a driver for H1/Cr50Simon Glass
H1 is a Google security chip present in recent Chromebooks, Pixel phones and other devices. Cr50 is the name of the software that runs on H1 in Chromebooks. This chip is used to handle TPM-like functionality and also has quite a few additional features. Add a driver for this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-07tpm: Add more TPM2 definitionsSimon Glass
Add definitions for access and status. Need to drop the mixed case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: coral: Add I2C and TPM device-tree definitionsSimon Glass
Add nodes to the device tree for Cr50 and other available I2C ports. Also enable the ACPI interrupt driver. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: Add support for ACPI general-purpose eventsSimon Glass
ACPI GPEs are used to signal interrupts from peripherals that are accessed via ACPI. In U-Boot these are modelled as interrupts using a separate interrupt controller. Configuration is via the device tree. Add a simple driver for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: irq: Add support for requesting interruptsSimon Glass
At present driver model supports the IRQ uclass but there is no way to request a particular interrupt for a driver. Add a mechanism, similar to clock and reset, to read the interrupts required by a device from the device tree and to request those interrupts. U-Boot itself does not have interrupt-driven handlers, so just provide a means to read and clear an interrupt. This can be useful to handle peripherals which must use an interrupt to determine when data is available, for example. Bring over the basic binding file as well, from Linux v5.4. Note that the older binding is not supported in U-Boot; the newer 'special form' must be used. Add a simple test of the new functionality. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: itss: Add of-platdata supportSimon Glass
Allow this driver to be used in TPL by setting up the interrupt type correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: Give each driver an IRQ typeSimon Glass
Add an IRQ type to each driver and use irq_first_device_type() to find and probe the correct one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: irq: Add support for interrupt controller typesSimon Glass
There can be different types of interrupt controllers in a system and some drivers may need to distinguish between these. In general this can be handled using the device tree by adding the interrupt information to device nodes. However on x86 devices we have interrupt controllers which are not tied to any particular device and not really used in U-Boot. These still need to be inited, so a convenient method is to give each controller a type and allow a particular controller type to be probed. Add support for this in sandbox along with a test. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: remove the new bland line at EOF of test/dm/irq.c] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: coral: Update i2c and rtc statusSimon Glass
These are actually working correctly, so update the status. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: apl: Drop the I2C config in FSP-SSimon Glass
This config is not actually used here and in U-Boot it seems better to set this using the device tree for each individual controller. The monolithic config of the FSP-S is only necessary if the FSP is actually configuring something, but here it is not. The FSP-S does enable/disable the various I2C ports. It might be nice to handle this using the okay/disabled property of each port, but that can be considered later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: apl: Use the clock driverSimon Glass
Enable the Intel clock driver and modify coral's device tree to use it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: Add a clock driver for Intel devicesSimon Glass
So far we have avoided adding a clock driver for Intel devices. But the Designware I2C driver needs a different clock (133MHz) on Intel devices than on others (166MHz). Add a simple driver that provides this information. This driver can be expanded later as needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07tegra: i2c: Change driver to use helper functionSimon Glass
Now that we have uclass_first_device_drvdata(), use it from the I2C driver to reduce code duplication. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: core: Change syscon to use helper functionSimon Glass
Now that we have uclass_first_device_drvdata(), use it from syscon to reduce code duplication. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: core: Add a function to find a device by drvdataSimon Glass
It is sometimes useful to find a device in a uclass using only its driver data. The driver data often indicates the 'subtype' of the device, e,g, via its compatible string. Add a function to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: core: Allow iterating devices without uclass_get()Simon Glass
At present we have uclass_foreach_dev() which requires that uclass_get() be called beforehand to find the uclass. This is good if we suspect that that function might fail, but often we know that the uclass is available. Add a new helper which does this uclass_get() automatically, so that only the uclass ID is needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: Move P2SB from Apollo Lake to a more generic locationWolfgang Wallner
The Primary to Sideband Bridge (P2SB) is not specific to Apollo Lake, so move its driver to a common location within arch/x86. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-06Merge tag 'efi-2020-04-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc2 Fix pylint issues in Python based tests.
2020-02-06Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Gen 5 and Watchdog fixes
2020-02-06video: enable VIDEO_ANSI and all VIDEO_BBP optionsAnatolij Gustschin
This partially reverts changes by commit 2cc393f32fd9 ("video: make BPP and ANSI configs optional") since it caused issues with other boards (missing LCD console output on pinebook, x86 platform or sandbox). Enable all disabled options again and opt out of not supported color depth in board defconfigs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Vagrant Cascadian <vagrant@debian.org>
2020-02-06configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-05Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes on ls1012a, ls1021a, ls1028ardb platforms Integrate fspi for ls1028a, add DM-I2C support, update secure boot header offset
2020-02-05Merge tag 'rpi-next-2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi - DFU support file operations lager then the default max size - add dfu support to dwc2 for bcm2835 - enable DFU for RPi4 - Fix RPi4 memory map to include the genet device - add driver for the genet ethernet device - enable network support in RPi4 config
2020-02-05test: efi_selftest: fix pylint warningsHeinrich Schuchardt
Fix pylint warnings: * add missing module and function documentation * correct indentation Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>