summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-05dm: core: Use const device for the dev_read_...() interfaceSimon Glass
These functions do not modify the device so should use a const pointer to it. Update the code accordingly. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Use const device for the devfdt...() interfaceSimon Glass
These functions do not modify the device so should use a const pointer to it. Update the code accordingly. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: pci: Update a few more interfaces for const udevice *Simon Glass
Tidy up a few places where const * should be used. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: pci: Update the PCI read_config() method to const dev *Simon Glass
At present this method uses a non-const udevice pointer, but the call should not modify the device. Use a const pointer. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Use const where possible in device.hSimon Glass
Update this header file to use const devices where possible, to permit callers to also use const. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes on ls1012a, ls1021a, ls1028ardb platforms Integrate fspi for ls1028a, add DM-I2C support, update secure boot header offset
2020-02-05Merge tag 'rpi-next-2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi - DFU support file operations lager then the default max size - add dfu support to dwc2 for bcm2835 - enable DFU for RPi4 - Fix RPi4 memory map to include the genet device - add driver for the genet ethernet device - enable network support in RPi4 config
2020-02-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Various minor fixes for x86 - Switch to ACPI mode on Intel edison - Support run-time configuration for NS16550 driver - Update coreboot and slimbootloader serial drivers to use NS16550 run-time configuration - ICH SPI driver fixes to hardware sequencing erase case - Move ITSS from Apollo Lake to a more generic location - Intel GPIO driver bug fixes - Move to vs2017-win2016 platform build host for Azure pipelines
2020-02-04Merge tag 'ti-v2020.04-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - DFU boot support for J721e - I2C support for J721e - GPIO support for J721e - Android boot image updates on AM57XX - OMAP watchdog fixes
2020-02-04board: ls1012ardb: do not use imply CONFIG_Heinrich Schuchardt
Inside Kconfig we must not use the CONFIG_ prefix with the imply statement. Fixes: 28e3c39e535b ("board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04armv8: ls2088a: Updates secure boot headers offsetPriyanka Singh
Updates the secure boot headers offsets of Kernel and other firmware images for SD and NOR boot sources used by esbc_validate command. Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04armv8: ls1088a: Updates secure boot headers offsetPriyanka Singh
Updates the secure boot headers offsets of Kernel and other firmware images for SD and QSPI boot sources used by esbc_validate command. Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04armv8: lx2160a: Updates secure boot headers offsetPriyanka Singh
Updates the secure boot headers offsets of Kernel and other firmware images for SD and XSPI boot sources used by esbc_validate command. Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04armv8: ls1012ardb: Updates secure boot headers offsetPriyanka Singh
Updates the secure boot headers offsets of Kernel and other firmware images used by esbc_validate command. Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04armv8: ls1046a: Updates secure boot headers offsetPriyanka Singh
Updates the secure boot headers offsets of Kernel and other firmware images for SD and QSPI boot sources used by esbc_validate command. Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04configs: ls1021a: Reserve low memory for CMAAlison Wang
The default reserved memory for CMA is high memory. If LPAE is enabled, highmem pages are non-remapped and can not be used with dma_alloc_coherent. This patch will reserve low memory for CMA and fix the issue on LS1021A. Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04dm: arm: ls1021a: add i2c DM supportBiwen Li
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1021A Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04dm: arm64: ls1012a: add i2c DM supportBiwen Li
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1012A Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LENBiwen Li
The default value of CONFIG_SYS_MALLOC_F_LEN (0x400) leaves U-Boot with not enough memory to load i2c driver before relocate, causing it to hang. Change the default value of CONFIG_SYS_MALLOC_F_LEN for below SoCs, - LS1012A - LS1021A - LS1043A - LS1046A Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flagBiwen Li
This adds DM_FLAG_PRE_RELOC flag to probe i2c driver before relocation Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04armv8: fsl-layerscape: spl: fix build error when DM_I2C is enabledBiwen Li
Fix below SPL build error when DM_I2C is enabled, - arch/arm/cpu/armv8/built-in.o: In function `board_init_f: arch/arm/cpu/armv8/fsl-layerscape/spl.c:74: undefined reference to `i2c_init_all' arch/arm/cpu/armv8/fsl-layerscape/spl.c:74:(.text.board_init_f+0x30): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `i2c_init_all' make[2]: *** [spl/u-boot-spl] Error 1 make[1]: *** [spl/u-boot-spl] Error 2 make: *** [sub-make] Error 2 arch/arm/cpu/armv8/fsl-layerscape/spl.c: In function 'board_init_f': arch/arm/cpu/armv8/fsl-layerscape/spl.c:74:2: warning: implicit declaration of function 'i2c_init_all'; did you mean 'misc_init_r'? [-Wimplicit-function-declaration]` Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04rtc: pcf8563: Add driver model supportBiwen Li
Add support of driver model of pcf8563 Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04configs: ls1028a: Enable FSPI supportKuldeep Singh
Enable FSPI controller support. So, flash environment can now be used Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04arm: dts: lx2160a: Add FSPI node propertiesKuldeep Singh
Align flexspi node properties with linux device-tree properties Tested on LX2160A-RDB Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04arm: dts: ls1028a: Add FSPI node propertiesKuldeep Singh
Align flexspi node properties with linux device-tree properties Tested on LS1028A-RDB Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04board: fsl: lx2160a: Add support to reset to eMMCMeenakshi Aggarwal
Add support of "qixis_reset emmc" command for lx2160a based platforms Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04arm: dts: ls1028a: fix interrupt propertiesMichael Walle
Sync the interrupt properties with the ones from Linux. Also use the constants provided by the dt-bindings header. Please note, that there are actual changes/fixes in the irq flags. U-Boot won't use the interrupt properties anyway. It's just to be consistent with the Linux device tree. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04arm: ls1028a: use the new flexspi driverMichael Walle
Also align the fspi node with the kernel one. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04configs: ls1012ardb: Enable CONFIG_SYS_RELOC_GD_ENV_ADDRKuldeep Singh
Enable the config for ls1012ardb as the entry got missed earlier. Fixes: 8d8ee47e03 ("env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol") Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04azure: Move to vs2017-win2016 platform build hostTom Rini
Azure is moving to remove the vs2015-win2012r2 platform build host. The two suggested new platforms to use are vs2017-win2016 and windows-2019. For now, move up to vs2017-win2016. Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-04gpio: intel_gpio: Fix register/bit offsets intel_gpio_get_value()Wolfgang Wallner
Fix the following in intel_gpio_get_value(): * The value of the register is contained in the variable 'reg', not in 'mode'. The variable 'mode' contains only the configuration whether the gpio is currently an input or an output. * The correct bitmasks for the input and output value are PAD_CFG0_RX_STATE and PAD_CFG0_TX_STATE. Use them instead of the currently used PAD_CFG0_RX_STATE_BIT and PAD_CFG0_TX_STATE_BIT. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-04gpio: intel_gpio: Clear tx state bit when setting outputWolfgang Wallner
Add missing 'PAD_CFG0_TX_STATE' to the clear mask for pcr_clrsetbits32(). Otherwise this bit cannot be cleared again after it has been set once. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-04gpio: intel_gpio: Pass pinctrl device to pcr_clrsetbits32()Wolfgang Wallner
The function pcr_clrsetbits32() expects a device with a P2SB parent device. In intel_gpio_direction_output() and intel_gpio_set_value() the device 'dev' is passed to pcr_clrsetbits32(), which is a gpio-controller with a device 'pinctrl' as parent. This does not match the expectations of pcr_clrsetbits32(). But the 'pinctrl' device has a P2SB as parent. Pass the 'pinctrl' device instead of the 'dev' device to pcr_clrsetbits32(). Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-04x86: itss: Remove apl-prefixWolfgang Wallner
The Interrupt Timer Subsystem (ITSS) is not specific to Apollo Lake, so remove the apl-prefix of the implemented functions/structures/... Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-04x86: itss: Add a Kconfig option to enable/disable ITSS driverWolfgang Wallner
Add a Kconfig option to support enabling/disabling the inclusion of the ITSS driver depending on the platform. Atuomatically select the ITSS driver when building for Apollo Lake. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: squashed in http://patchwork.ozlabs.org/patch/1232761/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-04x86: Move itss.c from Apollo Lake to a more generic locationWolfgang Wallner
The Interrupt Timer Subsystem (ITSS) is not specific to Apollo Lake, so move it to a common location within arch/x86. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: conditionally build itss.c] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-04watchdog: omap_wdt: Fix WDT coding styleMarek Vasut
Fix obvious coding style problems, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04watchdog: omap_wdt: Fix WDT reloadingMarek Vasut
The watchdog timer value was never updated in the hardware by this driver, so the watchdog triggered on some random stale value that was left in the hardware. The TI SPRUH37C says, quote: 20.4.3.9 Modifying Timer Count/Load Values and Prescaler Setting ... After a write access, the load register value and prescaler ratio registers are updated immediately, but new values are considered only after the next consecutive counter overflow or after a new trigger command (the WDT_WTGR register). This means at least one trigger must happen. The driver probably depended on someone calling it's .reset() callback, however that is not guaranteed e.g. if the WDT operates without servicing. Add this missing trigger. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04watchdog: omap_wdt: Fix WDT timeout configurationMarek Vasut
The timeout parameter of omap3_wdt_start() is in miliseconds, while GET_WLDR_VAL() expects parameter in seconds. Fix this so the WDT driver is actually usable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_a72: Add GPIO supportFaiz Abbas
Enable CONFIG_DA8XX_GPIO to enable GPIO support. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e-main: Add Support for gpio0Faiz Abbas
Add the main_gpio0 node. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04gpio: da8xx_gpio: Add "ti,keystone-gpio" compatibleVignesh Raghavendra
Add "ti,keystone-gpio" compatible so as be able to use Linux DT files as is. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04gpio: da8xx_gpio: Fix compiler warningVignesh Raghavendra
Fix below compiler warning for 64bit builds drivers/gpio/da8xx_gpio.c: In function ‘davinci_get_gpio_bank’: drivers/gpio/da8xx_gpio.c:446:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] return (struct davinci_gpio *)addr; Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_defconfig: Enable PCA953x IO expanderVignesh Raghavendra
Enable PCA953x IO expander to control MMC/SD power lines. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e-common-proc-board: Enable I2C expander for SPLVignesh Raghavendra
IO expanders are required to power cycle SD card. So enable the same Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e-common-proc-board: Add I2C GPIO expanderVignesh Raghavendra
Add I2C GPIO expander required to power cycle MMC/SD Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e: Add I2C nodesVignesh Raghavendra
J721e SoC has 2 I2C instances in MCU domain and 7 I2C instances in main domain. Add DT nodes for the same Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04gpio: pca953x_gpio: Add support for 24 bit IO expanderVignesh Raghavendra
J721e EVM has a TCA6424 IO expander that has 24 GPIOs. Add support for the same Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_r5/a72_defconfig: Enable DFU related configsVignesh Raghavendra
Enable DFU, Fastboot and USB mass storage gadget related configs Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04configs: j721e_evm_r5/a72_defconfig: Enable USB Gadget related configsVignesh Raghavendra
Enable USB Gadget for R5 SPL, A72 SPL and A72 U-Boot to support DFU boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit (git 2.34.1) at 2024-12-23 18:17:22 +0000