summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-10net: fec_mxc: remove useless struct nbufAlbert ARIBAUD \(3ADEV\)
This locally defined struct is actually only used once and as an opaque type. Remove it for clarity. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-07-10iMX: adding parsing to hab_status commandUlises Cardenas
hab_status command returns a memory dump of the hab event log. But the raw data is not human-readable. Parsing such data into readable event will help to minimize debbuging time. Signed-off-by: Ulises Cardenas <Ulises.Cardenas@freescale.com>
2015-07-10imx: mx6 add i2c4 clock support for i.MX6SXPeng Fan
Add I2C4 clock support for i.MX6SX. Since we use runtime check, but not macro, we need to remove `#ifdef ..` in crm_regs.h, or gcc will fail to compile the code succesfully. Making the macros only for i.MX6SX open to other i.MX6x maybe not a good choice, but we have runtime check. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-07-10imx: mx6 remove duplicated enable_cspi_clockPeng Fan
enable_spi_clock does the same thing with enable_cspi_clock, so remove enable_cspi_clock. Remove enable_cspi_clock prototype in header file convert cm_fx6/spl.c to use enable_spi_clk Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2015-07-10imx6: standardise OCOTP and fuse config to mx6_commonPeter Robinson
According to README.mxc_ocotp the OCOTP is a stanard i.MX6 SoC feature so centralise the config in mx6_common.h so functionality is standard across all boards Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
2015-07-10thermal:imx_thermal: enter busywait cooling loop when over max CPU tempTim Harvey
Remove the check for temperature being within the min/max range and enter the busywait cooling loop whenever the CPU temperature is over the critical temp. This fixes the issue where if a board was booted at a temp greater than the CPU temperature max, it would skip the loop and never indicate or try to address the overtemp issue. Cc: Ye Li <b37916@freescale.com> Cc: Jason Liu <r64343@freescale.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-07-10Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
2015-07-08net: designware: Program MAC address to hardware after soft resetBin Meng
commit f566c99 "net: Update hardware MAC address if it changes in env" removes writing MAC address to designware controller after soft reset. This makes designware ethernet port fail to work. Actually the MAC address should always be programmed after soft reset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-07-08sunxi: Adjust Ippo_q8h_v1_2_a33_1024x600 dts filename to match the upstream ↵Hans de Goede
kernel sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts has been merged into the upstream Linux kernel as sun8i-a33-ippo-q8h-v1.2.dts, adjust u-boot to follow. Note we've never shipped a final u-boot version with the old name, so this is safe todo. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-07ARM: DRA72x: fix io delay calibration for ethernetMugunthan V N
we currently use in-development IODelay values for DRA72x which are proposed in the data sheet, however, DRA72x EVM uses DP83865 ethernet Phy over RGMII. The PHY characteristics and routing choices made on the EVM, make the current iodelay values fail ethernet communication. Instead, we need to choose custom values for DRA72x-evm specifically designed for the PHY and routing on the platform for ethernet to function. Cc: Nishanth Menon <nm@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-07-07Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2015-07-07board: baltos - add maintainer informationYegor Yefremov
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2015-07-07ARM: disable HAVE_PRIVATE_LIBGCC for ARM64Masahiro Yamada
We have not supported the private library for ARM 64bit. Prohibit ARM64 boards from enabling it until we make things ready. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-07board: am43xx: Add maintainer informationLokesh Vutla
am43xx_evm_ethboot/usbhost_boot_defconfig entries are missing in MAINTAINER file. Adding entries for them. Reported-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-07-07cairo: add missing MAINTAINERS fileAlbert ARIBAUD \(3ADEV\)
This removes the following two warnings from buildman: WARNING: no status info for 'cairo' WARNING: no maintainers for 'cairo' Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-07-07arm: dcc: Add uart dcc support for armv8Siva Durga Prasad Paladugu
Added UART DCC support for armv8 Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-07-07Revert "break build if it would produce broken binary"Simon Glass
The root cause of this problem should now be fixed. This reverts commit a6a4c542d316b3401f0840ac5378743191bca851. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Pavel Machek <pavel@denx.de> Tested-by: Pavel Machek <pavel@denx.de>
2015-07-07arm: Add ENTRY/ENDPROC to private libgcc functionsSimon Glass
When CONFIG_SYS_THUMB_BUILD is defined these functions may be called from Thumb code. Add the required ENTRY and ENDPROC bracketing so that BLX is used to call these ARM functions, instead of plain BL, which will fail. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Pavel Machek <pavel@denx.de>
2015-07-07Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD
2015-07-07armv7: better comment in start.SPavel Machek
Fix big/small letters in comment. Signed-off-by: Pavel Machek <pavel@denx.de> Tested-by: Marek Vasut <marex@denx.de>
2015-07-07gpio: lpc32xx: Use priv_data instead of platdataAxel Lin
The LPC32XX GPIO driver platdata currently contains GPIO state information, which should go into priv_data. Thus rename lpc32xx_gpio_platdata to lpc32xx_gpio_priv and convert to use dev_get_priv() instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
2015-07-06mx53loco: Use generic 'load' command instead of 'fatload'Guillaume GARDET
This patch uses generic 'load' command instead of 'fatload' for 'loadbootscript', 'loadimage' and 'loadfdt' for mx53loco board. This allows to use EXT partition instead of FAT, while keeping FAT compatibility. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Jason Liu <r64343@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Jason Liu <r64343@freescale.com>
2015-07-05Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2015-07-05sunxi: Add Sinlinx SinA33 defconfigChen-Yu Tsai
Sinlinx SinA33 is a core/daughter board SDK kit from Sinlinx. It has the A33 SoC, USB host, USB OTG, audio input/output, LCD, camera, SDIO and GPIO headers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-05sunxi: Sync sun8i dts files with the linux kernelChen-Yu Tsai
Copy over all the latest dts changes from mripard/sunxi/dt-for-4.2. This adds a dts file for Sinlinx SinA33 dev board, and the required changes in the .dtsi files. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-05sunxi: Add support for UART0 in PB pin group on A33Chen-Yu Tsai
The A33 adds a pinmux function for UART0 in the PB pin group. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-05sunxi: rsb: Enable R_PIO clock before configuring external pinsChen-Yu Tsai
The original code was configuring the external pins after enabling the R_PIO clock, which meant the configuration never made it to the pin controller the first time in SPL. Why this was working before is uncertain. Maybe the state was left from a previous boot sequence, or RSB just happened to be the default configuration. However with some A33 chips, SPL failed to configure the PMIC. This was seen by me and Maxime on the Sinlinx SinA33 dev board. Reordering the calls fixed this. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-05sunxi: hardware-feature-specific function index defines for PORT F UART0Chen-Yu Tsai
Commit 487b327 ("sunxi: GPIO pin mux hardware-feature-specific function index defines") renamed all GPIO index defines, but missed the PORT F UART0 setup functions. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-03Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
Conflicts: configs/tbs2910_defconfig configs/tqma6q_mba6_mmc_defconfig configs/tqma6q_mba6_spi_defconfig configs/tqma6s_mba6_mmc_defconfig configs/tqma6s_mba6_spi_defconfig include/configs/mx6_common.h Signed-off-by: Tom Rini <trini@konsulko.com>
2015-07-03colibri_vf: Increase console IO buffer size to 1024Sanchayan Maity
Increase console IO buffer size to 1024 from the previous value of 256. The previous value was too short for editing environment variables like ubiboot from the console. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-07-01Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2015-07-01Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2015-07-01spi: cf_qspi: fix clamp macro type check compilation warningsAngelo Dureghello
Fix compilation warnings for redefined 'clamp' macro and non-uniform clamp macro types. Signed-off-by: Angelo Dureghello <angelo@sysam.it> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-07-01README: Remove CONFIG_SPI_FLASH_DATAFLASH help textJagan Teki
Since the help text is added in drivers/mtd/spi/Kconfig Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01README: Remove CONFIG_SPI_FLASH_BAR help textJagan Teki
Since the help text is added in drivers/mtd/spi/Kconfig Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01sf: Kconfig: Add SPI_FLASH_BAR entryJagan Teki
Added SPI_FLASH_BAR entry on Kconfig with help description Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01defconfig: Move CONFIG_SPI_FLASH_BAR from configsJagan Teki
This commit moves: - CONFIG_SPI_FLASH_BAR from include/configs/*.h into configs/*_defconfigs Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01README: Remove CONFIG_SPI_FLASH_MTD help textJagan Teki
Since the help text is added in drivers/mtd/spi/Kconfig Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01spi: Kconfig: Add TEGRA20_SLINK entryJagan Teki
Added TEGRA20_SLINK entry on Kconfig with help description. Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com>
2015-07-01spi: Kconfig: Add TEGRA20_SFLASH entryJagan Teki
Added TEGRA20_SFLASH entry on Kconfig with help description. Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com>
2015-07-01spi: Kconfig: Add TEGRA114_SPI entryJagan Teki
Added TEGRA114_SPI entry on Kconfig with help description. Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com>
2015-07-01spi: Kconfig: Add ICH_SPI entryJagan Teki
Added ICH_SPI entry on Kconfig with help description. Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-01spi: Kconfig: Add EXYNOS_SPI entryJagan Teki
Added EXYNOS_SPI entry on Kconfig with help description. Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-07-01spi: Kconfig: Add FSL_QSPI entryJagan Teki
Added FSL_QSPI entry on Kconfig with help description. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Peng Fan <Peng.Fan@freescale.com> Cc: Haikun Wang <haikun.wang@freescale.com>
2015-07-01spi: Kconfig: Add FSL_ESPI entryJagan Teki
Added FSL_ESPI entry on Kconfig with help description. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Haikun Wang <haikun.wang@freescale.com>
2015-07-01spi: Kconfig: Add FSL_DSPI entryJagan Teki
Added FSL_DSPI entry on Kconfig with help description. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Haikun Wang <haikun.wang@freescale.com>
2015-07-01spi: Kconfig: Show dm-spi drivers if DM_SPI setJagan Teki
DM supported spi drivers are enbled only when DM_SPI enabled, so added DM_SPI if condition in Kconfig to show thoese only when it enabled. Also re-order the config items as incresing alphabetic order. Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01spi: Makefile: Use object file alphabetic orderJagan Teki
Use object files as incresing alphabetic order, so-that it's easy for readability. Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01spi: Kconfig: Add TI_QSPI entryJagan Teki
Added TI_QSPI entry on Kconfig with help description. Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-07-01spi: Kconfig: Add XILINX_SPI entryJagan Teki
Added XILINX_SPI entry on Kconfig with help description. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-02 17:41:38 +0000