summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-08serial: zynq: Use static inline for _debug_uart_init()Michal Simek
Mark _debug_uart_init() as static to avoid sparse warning and inline it to debug_uart_init(). Reported-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-08net: remove scary warning about EEPROM provided MAC addressAndre Przywara
In many parts of the computing world having a unique MAC address sitting in some on-NIC storage is considered the normal case. Remove the warning to not scare the user unnecessarily. This applies to Highbank/Midway and ARM's Juno, for instance. Besides that this fixes the formatting on Midway, for instance, which currently looks like: ... Net: xgmac0 Warning: xgmac0 using MAC address from net device , xgmac1 Warning: xgmac1 using MAC address from net device ... Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-01-08arm64: Juno/FVP: adjust kernel load addressAndre Przywara
The default kernel load offset for an arm64 kernel is 0x80000, so U-Boot takes cares of moving the loaded kernel to a matching memory location just before booting it. Since we run with caches off, this takes a while for any decently sized kernel - with no output explaining the reason for the delay (unless one uses a DEBUG build). By adjusting the default load offset for Juno and VFP to be 512K aligned in the first place we can skip this copying and boot much faster. Tested on Juno. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
2016-01-08arm, Makefile: correct compilation flag for u-boot-dtbAneesh Bansal
The compilation of u-boot-dtb.img should be controlled by CONFIG_OF_CONTROL and not CONFIG_DM. CONFIG_DM may be defined even without Device Tree requirement. This was added in commit 947cee1127c5fa97529c8cda4f0b48d141f92560. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> CC: Alison Wang <alison.wang@freescale.com>
2016-01-08bootcount: Correct #endif comment to match, other aestheticsRobert P. J. Day
Correct mismatched comment on #endif to agree with its #if defined(). Also add some missing #endif comments for consistency, take out extraneous blank lines for readability. rday
2016-01-08doc: Tidy up first part of top-level README fileRobert P. J. Day
First (small) pass at tidying up the README file, including: * remove references to obsolete CREDITS file * remove (some) references to obsolete boards.cfg file * remove at least one reference to a "scrapped" board * cut down unnecessarily detailed directory hierarchy * bunch of grammar and spelling tweaks Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-01-08powerpc: Various typo fixes under arch/powerpc/cpu/mpc83xxRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-01-08include: Correct "requset" typoes in misc.hRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-08Merge git://git.denx.de/u-boot-dmTom Rini
2016-01-08rockchip: Fix the configuration for chromebook_jerrySimon Glass
Various updates did not make it through to this board. Also the instructions for building a SPI image are no-longer correct. Fix these so that Jerry can boot to a prompt again. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-08rockchip: Drop a debug message when outputing SPI imagesSimon Glass
There is an unnecessary sector count displayed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-08rockchip: Enable generation of SPI imagesSimon Glass
This feature was dropped at some point. Restore it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-07net: Fix delay in net_retry testJoe Hershberger
Introduced in 45b4773 (net/arp: account for ARP delay, avoid duplicate packets on timeout) Check the arp timeout and adjust the timeout start time before the call to eth_recv() so that the sandbox driver has the opportunity to adjust the sandbox timer after the new start time has been recorded. Also, change the adjustment amount by 11 seconds instead of exactly the 10 seconds that the ping timout is expecting since the timeout check is looking for the time elapsed to be greater than but not equal to the specified delay. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-07fdt: fix address cell count checking in fdt_translate_address()Przemyslaw Marczak
Commit: dm: core: Enable optional use of fdt_translate_address() Enables use of this function as default, but after this it's not possible to get dev address for the case in which: '#size-cells == 0' This causes errors when getting address for some GPIOs, for which the '#size-cells' is set to 0. Example error: '__of_translate_address: Bad cell count for gpx0' Allowing for that case by modifying the macro 'OF_CHECK_COUNTS', (called from )__of_translate_address(), fixes the issue. Now, this macro doesn't check, that '#size-cells' is greater than 0. This is possible from the specification point of view, but I'm not sure that it doesn't introduce a regression for other configs. Please test and share the results. Tested-on: Odroid U3, Odroid X2, Odroid XU3, Sandbox. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2016-01-07dm: usb: Add a remove() method for USB keyboardsSimon Glass
At present USB keyboards are not properly removed with driver model. Add the code to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
2016-01-07Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2016-01-07usb: Allow up to 7 storage devicesSimon Glass
The current limit of 5 is not enough for the driver model USB tests. Really we should not have a limit but the driver model code still uses the usb_dev_desc[] array, which has a limit. Increasing the limit by 2 should not bother anyone. Adjust it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
2016-01-07dm: Disable all SPI and SPI flash testsSimon Glass
This subsystem has been broken since commit: 4efad20a sf: Update status reg check in spi_flash_cmd_wait_ready There has so far been no response from the maintainer, and a release is imminent. For now, let's just disable the tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-07dm: eth: Stick to 'ethact' when 'ethrotate' is 'no' in eth_init()Bin Meng
When 'ethrotate' variable is set to 'no' and 'ethact' variable is already set to an ethernet device, we should stick to 'ethact'. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-01-07dm: eth: Test 'ethrotate' before changing current ethernet deviceBin Meng
In eth_current_changed(), the call to eth_get_dev() below has a side effect of rotating ethernet device if uc_priv->current == NULL. This is not what we want when 'ethrotate' variable is 'no'. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-01-07test: add sandbox timer to test.dtsThomas Chou
Add missing sandbox timer to test.dts, so that test-dm works. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-01-07imx_watchdog: always set minimal timeout in reset_cpuAndrey Skvortsov
The problem is that timeout bits in WCR register were leaved unchanged. So previously set timeout value was applied and therefore 'reset' command takes any value up to two minutes, depending on previous watchdog settings, instead of minimal 0.5 seconds. Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
2016-01-07gpio: mxs: add name_to_gpio() functionMåns Rullgård
Override the default name_to_gpio() function with one that accepts strings of the form bank:pin. If a colon is present in the provided name, it behaves like the default version. This lets the "gpio" command work with sane names rather than requiring the user to enter the bank/pin composite in decimal. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2016-01-07imx: mx7: fix the temperature checking for Rev1.1Peng Fan
To TO1.0, we can not rely on finish bit to read temperature. But to TO1.1, the issue was fixed by IC, we can rely on finish bit for temperature reading for TO1.1. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com>
2016-01-07imx: mx6ul: disable VIDEO for SPLPeng Fan
With DEBUG macro enabled, SPL build failure: " arch/arm/cpu/armv7/built-in.o: In function `reset_misc': ~/uboot/arch/arm/cpu/armv7/mx6/soc.c:406: undefined reference to `lcdif_power_down' scripts/Makefile.spl:244: recipe for target 'spl/u-boot-spl' failed " Wrap VIDEO settings with ifndef CONFIG_SPL_BUILD Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2016-01-07pfuze: Fix unsigned variable for less-than-zero comparisonYe.Li
According to the Coverity result, a unsigned int variable is used fo less- than-zero comparison, the result is never true. Need to fix the variable type to signed int. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2016-01-07wandboard: Simplify the Ethernet PHY configurationFabio Estevam
As per the AR8031 datasheet: "For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." So do as suggested and also add a 100us delay after deasserting the reset line to guarantee that the PHY ID can be read correctly and the Atheros 8031 PHY driver can be loaded automatically. This results in a simpler code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-07mx6sabresd: Simplify the Ethernet PHY configurationFabio Estevam
As per the AR8031 datasheet: "For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." So do as suggested and also add a 100us delay after deasserting the reset line to guarantee that the PHY ID can be read correctly and the Atheros 8031 PHY driver can be loaded automatically. This results in a simpler code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-07phy: atheros: Use ar8035_config for AR8031Fabio Estevam
Commit 08ad9b068afb88 (" ar8031: modify the config func of ar8031 to ar8021_config") selected 'ar8021_config' as the configuration function for AR8031. The correct would be to use 'ar8035_config' instead as AR8031/AR8035 have the same programming model and even share the same phy driver in the linux kernel: drivers/net/phy/at803x.c. Tested on a mx6qsabresd and wandboard, which now can work without any PHY setup code in the board files. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-07Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2016-01-07spi: fsl_qspi: fix an error of using GENMASKGong Qianyu
This commit fixes the change of below commit "spi: fsl_qspi: Use GENMASK" (sha1 :bad490a24212c068c5b718b9189f47ea4075d078) Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-01-07spi: spi_flash: Fix the arguments of stm_is_locked_sr()Fabio Estevam
stm_is_locked_sr() takes the status register (SR) value as the last parameter, not the second. Based on a patch from Brian Norris for the linux kernel: http://git.infradead.org/linux-mtd.git/commit/a32d5b726ff8cf32bf491522b0ac8ae2545a063e Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-01-05powerpc, mpc5xxx: fix missing bootflag initHeiko Schocher
since: commit: f05ad9ba "Add a way to skip relocation" tqm5200s board fails to boot. Reason is that board_init_f has a function parameter bootflag, which is not setup in in arch/powerpc/cpu/mpc5xxx/start.S _start So board_init_f gets a undefined bootflag, currently the gd pointer address. Unfortunately this address sets the GD_FLG_SKIP_RELOC bit, so u-boot code gets not relocated and u-boot does not boot ... Init bootflag with 0, and tqm5200 boots fine again. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com>
2016-01-04Prepare v2016.01-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-04common: nvedit: use snprintf instead of sprintfPeng Fan
Use snprintf to replace sprintf. Coverity log: " Unbounded source buffer (STRING_SIZE) string_size: Passing string init_val of unknown size to sprintf. " Reported-by: Coverity Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-04common: env: initialize scalar variablePeng Fan
Before calling hsearch_r, initialize callback entry to NULL. Coverity log: " Uninitialized scalar variable (UNINIT) uninit_use_in_call: Using uninitialized value e. Field e.callback is uninitialized when calling hsearch_r. " Reported-by: Coverity Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org>
2016-01-04common: cli: avoid memory leakPeng Fan
Whether CONFIG_SYS_HUSH_PARSER is defined or not, should always check to free 'buff' to avoid memory leak. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org>
2016-01-04net: e1000: use correct helper to do endianness conversionMiao Yan
In struct e1000_rx_desc, field 'length' is declared as uint16_t, so use le16_to_cpu() to do endianness conversion. Also drop conversion on 'status' which is declared as uint8_t. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-04qemu-ppce500: pass 'range_id' around in pci_map_regionMiao Yan
In pci_map_region(), pass 'range_id' to fdt_read_range(), otherwise the same address will be mapped again in other calls to pci_map_region() Signed-off-by: Miao Yan <yammiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2016-01-04checkpatch: fix left brace warningHeiko Schocher
using checkpatch with Perl 5.22.0 generates a warning, this is fixed in linux through commit: commit 4e5d56bdf892e18832a6540b63ebf709966bce2a Author: Eddie Kovsky <ewk@edkovsky.org> Date: Wed Sep 9 15:37:52 2015 -0700 checkpatch: fix left brace warning Using checkpatch.pl with Perl 5.22.0 generates the following warning: Unescaped left brace in regex is deprecated, passed through in regex; This patch fixes the warnings by escaping occurrences of the left brace inside the regular expression. Adapt it for U-Boot. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-01-04mmc: update MMC_ERASE argument to match Linux kernel.Eric Nelson
Table 41 of the JEDEC standard for eMMC says that bit 31 of the command argument is obsolete when issuing the ERASE command (CMD38) on page 115 of this document: http://www.jedec.org/sites/default/files/docs/jesd84-B45.pdf The SD Card Association Physical Layer Simplified Specification also makes no mention of the use of bit 31. https://www.sdcard.org/downloads/pls/part1_410.pdf The Linux kernel distinguishes between secure (bit 31 set) and non-secure erase, and this patch copies the macro names from include/linux/mmc/core.h. Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Eric Nelson <eric@nelint.com> Tested-by: Hector Palacios <hector.palacios@digi.com>
2016-01-04Merge branch 'master' of git://git.denx.de/u-boot-ubiTom Rini
2016-01-04UBI: Fix compile error when CONFIG_UBI_SILENCE_MSG definedLadislav Michl
drivers/mtd/ubi/io.c:1354:3: error: 'dump_len' undeclared (first use in this function) dump_len = max_t(int, 128, len - i); Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-01-03Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-01-03imx: mx6qsabreauto: support lvds displayPeng Fan
Move setup_display from board_early_init_f to board_init. Add more clock settings. Add blacklight iomux setting. Add display_info_t info for the lvds screen. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2016-01-03i2c: mxc: add a condition in case the parameter is NULLGong Qianyu
This could avoid executing the code that only applies to i.MX platforms. The bus_i2c_init() is called before relocation and will assgin value to a static variable. If U-Boot is then still running in a flash device, it's theoretically not allowed to write data to flash without an erasing operation. For i.MX platforms, the U-Boot is always running in DDR. Actually it causes asynchronous error when the ARM64 system error report is enabled and the flash write protect is set. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2016-01-03imx_common: check for Serial Downloader in spl_boot_deviceStefano Babic
Check for bmode before reading the boot device to check if a serial downloader is started, and returns UART if the serial downloader is set, letting SPL to wait for an image if CONFIG_SPL_YMODEM_SUPPORT is set. This allows to load again a SPL based board with imx_usb_loader together with a tool such as kermit. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tim Harvey <tharvey@gateworks.com> CC: Fabio Estevam <Fabio.Estevam@freescale.com> CC: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Eric Nelson <eric@nelint.com> Tested-by: Eric Nelson <eric@nelint.com>
2016-01-03ARM: mxs: allow boards to select DC-DC switching clock sourceMichael Heimpold
For some board designs, it might be useful to switch the DC-DC clock source to something else rather the default 24 MHz, e.g. for EMI reasons. For this, override the mxs_power_setup_dcdc_clocksource function in your board support files. Example: void mxs_power_setup_dcdc_clocksource(void) { mxs_power_switch_dcdc_clocksource(POWER_MISC_FREQSEL_20MHZ); } Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
2016-01-03cgtqmx6eval: fix pad configuration for SPI busMichael Schanz
Use the macro SETUP_IOMUX_PAD(...) rather than imx_iomux_v3_setup_multiple_pads(...) in order to setup the pin configuration for ECSPI1. ARRAY_SIZE(pads) provides the wrong size for imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads)) in case of MX6QDL. In the particular case, the content of GPR12 is overwritten and the IPG/AHB/ATB/ATP clocks are deactivated. Therefore, the connection to the system via JTAG is not possible anymore. Furthermore, kernel version 3.0.35 hangs during bootprocess in the function etm_init(). Signed-off-by: Michael Schanz <michael.schanz@congatec.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2016-01-03net: fec_mxc: unregister mdio bus on probe errorMåns Rullgård
If fecmxc_initialize_multi() fails, it frees but does not unregister the mdio bus, causing subsequent uses of the "mii" command to crash. Fix this by adding mdio_unregister() calls where needed. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Eric Nelson <eric@nelint.com>
generated by cgit (git 2.34.1) at 2025-01-07 01:03:15 +0000