summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-10usb: xhci-dwc3: Add support for dis_u2_susphy_quirkNeil Armstrong
This quirk is necessary for the Amlogic GXL SoCs otherwise the Port 2 PHY doesn't get out of suspend and U-Boot resets the board after: XHCI timeout on event type 33... cannot recover. BUG: failure at drivers/usb/host/xhci-ring.c:474/xhci_wait_for_event()! BUG! This quirk is also handled in the dwc3 core code, but until the xhci-dwc3 driver uses the dwc3 core, the quirk must be handled here to fix USB support on the Amlogic libretech-cc and libretech-ac board when a device is only plugged in the OTG port. Cc: Yuri Frolov <crashing.kernel@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Fixes: dc9cdf859e ("usb: dwc3: Add DWC3 controller driver support") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-09arm: ti: Add missing "=" from previous fixTom Rini
While the original patch to fix a regression in distro boot for mmc on these platforms had the correct syntax, I broke the change while applying. Add back in the missing "=" here so that the syntax is correct. Reported-by: Andre Heider <a.heider@gmail.com> Fixes: 27e0f3bcf075 ("arm: ti: Fix regression in distro boot for mmc") Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-08Merge tag 'mmc-9-6-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
Bug fixes to mmc_spi Add Aspeed SD driver Fix dw_mmc timeout calculation Fix timeout values passed to mmc_wait_dat0 sdhci dt caps/mask update [trini: Fix evb-ast2500_defconfig CONFIG_MMC line] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-07Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Initial DM conversion
2019-09-06Merge tag 'rpi-next-2019.10' of https://github.com/mbgg/u-bootTom Rini
- fix mailbox status register used for polling - fix bcm2835_sdhost to wait long enough for a transfer to complete - increase kernel image size from 8 MB to 64 MB on arm64 - add support for RPi4 - add prefixes for raspberry pi related stuff to git-mailrc
2019-09-06git-mailrc: Add rpi and bcm283x maintainerAndrei Gherzan
Add entries for bcm283x and rpi prefix. Signed-off-by: Andrei Gherzan <andrei@balena.io> [mb: add commit message] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06RPI: Add memory map for bcm2711Andrei Gherzan
Define the memory map for the BCM2711 based on the dt configuration available in the Raspberry Pi kernel fork. Signed-off-by: Andrei Gherzan <andrei@balena.io> [mb: BCM2838 -> BCM2711] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06mmc: bcm283x: Add support for bcm2711 device in bcm2835_sdhciMatthias Brugger
The bcm2711 has two emmc controllers. The difference is the clocks they use. Add support for the second emmc controller. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Andrei Gherzan <andrei@balena.io>
2019-09-06ARM: bcm283x: Include definition for additional emmc clockAndrei Gherzan
This clock has a different mbox ID so have this included in the relevant header file. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06RPI: Add entry for Raspberry Pi 4 model BAndrei Gherzan
The Raspebrry Pi 4 uses the new revision code scheme as documented by the foundation. This change adds an entry for this board as well. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06ARM: bcm283x: Define configs for RaspberryPi 4Andrei Gherzan
Define two target configs for Raspberry Pi 4 (32 and 64bit) and the corresponding BCM2838* configs. Be aware of the current limitation in firmware which requires an explicit configuration to force the arm in 64bit mode when the respective target is used. Signed-off-by: Andrei Gherzan <andrei@balena.io> [mb: rename BCM2838 -> BCM2711] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06ARM: bcm283x: Add BCM283x_BASE defineMatthias Brugger
Devices of bcm283x have different base address, depending if they are on bcm2835 or bcm2836/7. Use BCM283x_BASE depending on the SoC you want to build and only add the offset in the header files. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Andrei Gherzan <andrei@balena.io>
2019-09-06RPI: Add defconfigs for rpi4 (32/64)Andrei Gherzan
This defines a minimum defconfig for each of the two Raspberry Pi 4 variants. One notable difference is that we don't have a embedded dt for this board given that the fw supplies us with one which we can reuse. Furthermore, the ram size is not queryable through mbox interface as the maximum reported size is 1G. The fw patches the dt with the right memory configuration and uboot uses it as it is. We avoid u-boot touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY is deactivated. Signed-off-by: Andrei Gherzan <andrei@balena.io> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06rpi: increase SYS_BOOTM_LEN to 64M on ARM64Bonnans, Laurent
On AArch64, kernel images are not self-decompressing and easily exceed the 8MB limit. Signed-off-by: Laurent Bonnans <laurent.bonnans@here.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06mmc: bcm2835-host: Fix wait_transfer_completeRaul Benet
Function bcm_2835_wait_transfer_complete() is not waiting long enough. The previous code was claiming to wait for ~1 seconds, but as it depends on register reads it's time actually varies. Some cards require wait times of up to ~56 ms to perform the command 'saveenv' on an EXT4 partition. Re-implement the loop exit condition to use get_timer() which allows to specify the wait time in more reliable manner. Set the maximum wait time to the originally intended 1 second. Signed-off by: Raul Benet <raul.benet_at_kaptivo.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06ARM: bcm283x mbox: Fix send status registerFabian Vogt
Before we can send a message to the mailbox we have to check that there is space to do so. Therefore we poll the status register. But up to now the wrong status register, the one of mailbox 0, was checked. Fix this by polling the status regiser of mailbox 1. Signed-off-by: Fabian Vogt <fvogt@suse.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> [mb: rename registers and update commit message] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06Merge https://gitlab.denx.de/u-boot/custodians/u-boot-samsungTom Rini
- ARM: exynos5: Try to boot on mmc2 before mmc0/1
2019-09-06Merge tag 'efi-2019-10-rc4-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc4 (3) This includes the patches from Pull request for UEFI sub-system for v2019.10-rc4 (2) Fix UEFI specification compliance issues in the simple network protocol: * Correctly set and reset the interrupt status. * Support filling the header in the Transmit() service. * Correct the checking and setting of the network state. * Implement the MCastIPtoMAC() service. * Adjust the simple network protocol unit test. Fix UEFI specification compliance issues in the protocol. Fix UEFI specification compliance issues in the simple text output protocol: * Avoid out of bounds cursor position. * Do not set illegal screen mode. Fix UEFI specification compliance issues in the block IO protocol: * Check parameters. * Return correct status code if buffer is unaligned. Refactor initialization of EFI memory in preparation of support for > 3GB memory on x86.
2019-09-06mmc: sdhci: Add support for dt caps & caps maskT Karthik Reddy
The sdhci capabilities registers can be incorrect. The sdhci-caps-mask and sdhci-caps dt properties specify which bits of the registers are incorrect and what their values should be. This patch makes the sdhci driver use those properties to correct the caps. Also use "dev_read_u64_default" instead of "dev_read_u32_array" for caps mask. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-06dm: core: Add functions to read 64-bit dt propertiesT Karthik Reddy
This patch adds functions dev_read_u64_default & dev_read_u64 to read unsigned 64-bit values from devicetree. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-05doc: UEFI API documentationHeinrich Schuchardt
Add some more files to the UEFI API documentation. Correct some Sphinx comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: EFI_BLOCK_IO_PROTOCOL.Reset()Heinrich Schuchardt
We cannot do anything in EFI_BLOCK_IO_PROTOCOL.Reset() but this does not justify to return an error. Let EFI_BLOCK_IO_PROTOCOL.Reset() return EFI_SUCCESS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: use EFI_PRINT() instead of debug()Heinrich Schuchardt
EFI_PRINT() offers indention of debug messages. Adjust the debug messages of the BLOCK_IO_PROTOCOL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: parameter checks BLOCK_IO_PROTOCOLHeinrich Schuchardt
Check parameters of ReadBlocks() and WriteBlocks(). If the buffer size is not a multiple of the block size, we have to return EFI_BAD_BUFFER_SIZE. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: do not set invalid screen modeHeinrich Schuchardt
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.SetMode() should return EFI_UNDEFINED if a screen mode is not available. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-09-05efi_loader: cursor positioningHeinrich Schuchardt
When backspacing in column 0 do no set the column index to ULONG_MAX. Ensure that the row number is not set to ULONG_MAX even if the row count is advertised as 0. Ignore control characters other the 0x08, 0x0a, 0x0d when updating the column. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: correctly render UsbClass DP nodes as textHeinrich Schuchardt
Correct the text representation of UsbClass device path nodes. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: correctly render CD-ROM device path nodesHeinrich Schuchardt
Correct the name of the partition size component in struct efi_device_path_cdrom_path. Render entry, start, and size when converting a CD-ROM device path node to text. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: correctly render MAC address device path nodesHeinrich Schuchardt
If the interface type is greater 1 render all 32 bytes of the MAC address. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: correct text conversion for vendor DPHeinrich Schuchardt
Vendor device paths may contain data. When converting vendor device paths to text this binary data has to be rendered. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: Extract adding a conventional memory in separate routinePark, Aiden
Adding a conventional memory region to the memory map may require ram_top limitation and it can be also commonly used. Extract adding a conventional memory to the memory map in a separate routine for generic use. Signed-off-by: Aiden Park <aiden.park@intel.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: implement MCastIPtoMACHeinrich Schuchardt
Implement the MCastIPtoMAC service of the simple network protocol. It converts an multicast IPv4 (or IPv6) address to a multicast Ethernet address. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: fix status management in network stackHeinrich Schuchardt
The network should start in status EfiSimpleNetworkStopped. Add and correct status checks in the simple network protocol. Correct the unit test: * Shutdown() and Stop() during setup if needed * invoke Shutdown() before Stop() when tearing down Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: EFI_SIMPLE_NETWORK.Transmit() fill headerHeinrich Schuchardt
Fill the media header in EFI_SIMPLE_NETWORK.Transmit(). Check that the buffer size is large enough for the header. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_selftest: check EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPTHeinrich Schuchardt
Check that when the WaitForPacket event occurs EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT is set. Check the return value of Receive(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: interrupts in simple network protocolHeinrich Schuchardt
GetStatus() must clear the interrupt status. Transmit() should set the TX interrupt. Receive() should clear the RX interrupt. Initialize() and Start() should clear the interrupt status. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05riscv: qemu: enable CONFIG_CMD_BOOTEFI_SELFTESTHeinrich Schuchardt
Enable CONFIG_CMD_BOOTEFI_SELFTEST for the QEMU RISC-V boards. Travis CI QEMU testing has been enabled for qemu-riscv64_defconfig. With this patch we will test the UEFI sub-system on the board. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-05ARM: exynos5: Try to boot on mmc2 before mmc0/1Guillaume GARDET
As stated in commit a61a4a1db009e3e600258551a01b54c4f50ec103 with DM_MMC, exynos boards now enumarates external SD/MMC slot as mmc2, instead of mmc1 with legacy mode. Moving mmc2 before mmc1/0 restore the previous behavior of trying external SD/MMC before internal slot. Signed-off-by: Guillaume GARDET <guillaume.gardet@arm.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Anand Moon <linux.amoon@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-09-05dm: mmc_spi: Fix NULL pointer dereference in mmc_spi_bind()Bin Meng
The mmc_spi driver's priv is not available in its bind phase(). Use platdata instead. Fixes: 05e35d429745 ("mmc: mmc_spi: Re-write driver using DM framework") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-09-05mmc: dw_mmc: fix timeout calculate methodKever Yang
There are two cases not been considered: - use uint for timeout, it will overflow when size bigger than 512KB for it *8*1000 at the beginning, but we may use size up to 32MB; The 'timeout' will overflow if size bigger than 51.2MB after this fix, which should be enough for U-Boot; - The timeout is using clock speed for data rate, but the device may not have such high speed, eg. clock is 52MHz while the device write speed may be less than 10MB/s, and we may use up to 150MHz clock. Fix them in this patch, the max timeout is about 6500 when size is 32MB after fix. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-05ARM: dts: ast2500: Add SDHCI nodesEddie James
Add nodes for the Aspeed SD controllers with their necessary properties. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Eddie James <eajames@linux.ibm.com>
2019-09-05configs: AST2500 EVB: Enable SD controllerEddie James
Enable the MMC subsystem and the Aspeed SD controller. Also enable the use of the device tree for probing the controller. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2019-09-05mmc: Add Aspeed SD controller driverEddie James
Add support for the Aspeed SD host controller engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2019-09-05clk: aspeed: Add support for SD clockEddie James
Add code to enable the SD clock on the ast2500 SoC. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Eddie James <eajames@linux.ibm.com>
2019-09-05mmc: Rename timeout parameters for clarificationSam Protsenko
It's quite hard to figure out time units for various function that have timeout parameters. This leads to possible errors when one forgets to convert ms to us, for example. Let's rename those parameters correspondingly to 'timeout_us' and 'timeout_ms' to prevent such issues further. While at it, add time units info as comments to struct mmc fields. This commit doesn't change the behavior, only renames parameters names. Buildman should report no changes at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-09-05mmc: Fix timeout values passed to mmc_wait_dat0()Sam Protsenko
mmc_wait_dat0() expects timeout argument to be in usec units. But some overlying functions operate on timeout in msec units. Convert timeout from msec to usec when passing it to mmc_wait_dat0(). This fixes 'avb' commands on BeagleBoard X15, because next chain was failing: get_partition() -> mmc_switch_part() -> __mmc_switch() -> mmc_wait_dat0() when passing incorrect timeout from __mmc_switch() to mmc_wait_dat0(). Fixes: bb98b8c5c06a ("mmc: During a switch, poll on dat0 if available and check the final status") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Eugeniu Rosca <rosca.eugeniu@gmail.com> Tested-by: Eugeniu Rosca <rosca.eugeniu@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-09-05dm: mmc: remove unused U_BOOT_DRIVER(mmc)Andy Yan
When look through the code, I found this bare metal drives is not used, so remove it. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-04Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-netTom Rini
- Assorted CVE fixes - Other fixes
2019-09-04net: nfs: remove superfluous packed attributeHeinrich Schuchardt
With GCC 9.2.1 net/nfs.c leads to multiple errors of type address-of-packed-member. net/nfs.c: In function ‘rpc_req’: net/nfs.c:199:18: error: taking address of packed member of ‘struct rpc_t’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 199 | p = (uint32_t *)&(rpc_pkt.u.call.data); | ^~~~~~~~~~~~~~~~~~~~~~ net/nfs.c: In function ‘nfs_readlink_reply’: net/nfs.c:631:46: error: taking address of packed member of ‘struct rpc_t’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 631 | nfs3_get_attributes_offset(rpc_pkt.u.reply.data); | ~~~~~~~~~~~~~~~^~~~~ LD drivers/block/built-in.o net/nfs.c: In function ‘nfs_read_reply’: net/nfs.c:692:46: error: taking address of packed member of ‘struct rpc_t’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 692 | nfs3_get_attributes_offset(rpc_pkt.u.reply.data); | ~~~~~~~~~~~~~~~^~~~~ struct rpc_t is only used as local variable. It is naturally packed. So there is no need for the attribute packed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04net: nfs: remove superfluous conversionsHeinrich Schuchardt
rpc_pkt.u.call.data is an array of uint32_t. There is no need to convert it to uint32_t *. memcpy() expects void * as it 1st and 2nd argument. There is no point in converting pointers to char * before passing them to memcpy(). In ntohl(data[1]) != 0 calling ntohl() is superfluous. If the value is zero, does not depend on the byte order. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit (git 2.34.1) at 2025-01-05 01:47:07 +0000