summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-14usb: gadget: g_dnl: add function g_dnl_set_productPatrick Delaunay
Add a function g_dnl_set_product to change the Product string used in USB enumeration in any command based on download gadget. If the function is called with NULL pointer, the product string is set to the default value (product[] = "USB download gadget"). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14doc: stm32mp1: update DFU support examplePatrick Delaunay
Update stm32mp1 board documentation with new management of MMC and MTD partitions and new PID df11. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: adapt MTD partition for BOOT from NOR or NANDPatrick Delaunay
Dynamically adapt the MTD partitions in NAND and SPI-NAND when boot from NOR or NAND/SPI-NAND is detected. This patch avoids to define the save MTD partition name for NOR and NAND devices and issue with latest kernel: only the needed MTD partitions are defined. For boot from NOR 1/ bootloader (TF-A, U-Boot and OP-TE) in NOR 2/ one large UBI partition in NAND For boot from NAND 1/ bootloader (TF-A, U-Boot and OP-TE) in MTD raw partition 2/ one large UBI partition Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: support boot from spi-nandPatrick Delaunay
Manage BOOT_FLASH_SPINAND, with boot_device="spi-nand" and treat this value in bootcmd_stm32mp. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14configs: stm32mp1: remove optee defconfigPatrick Delaunay
As the op-tee presence is detected by U-boot, the stm32mp15_optee_defconfig is identical to stm32mp15_trusted_defconfig and can be removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: use FDT address provided by TF-A at boot timePatrick Delaunay
Save and use the FDT address provided by TF-A in r2 at boot time (it is NT_FW_CONFIG = Non Trusted Firmware configuration file) Address is saved in save_boot_params(), called by start.S and the used DTB is gd->fdt_blob = board_fdt_blob_setup(). If dtb is not provided or invalid, U-Boot use as fallback the builtin DTB. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14stm32mp1: dynamically detect op-tee presencePatrick Delaunay
Activate OP-TEE driver for trusted and optee defconfig. This driver allows detection of TEE presence for boot from flash; CONFIG_STM32MP1_OPTEE is also removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: reserve memory for OP-TEE in device treePatrick Delaunay
Add reserve memory for OP-TEE in U-Boot and in kernel device tree: - no more reduce the DDR size in "memory" node: CONFIG_SYS_MEM_TOP_HIDE is no more used - U-Boot device-tree defines the needed "reserved-memory" for OP-TEE and U-Boot should not use this reserved memory: board_get_usable_ram_top use lmb lib to found the first free region, the not reserved memory, enough to relocate U-Boot: the needed size of U-Boot is estimated with gd->mon_len + CONFIG_SYS_MALLOC_LEN. - the optee node ("optee@...": firmware with compatible "linaro,optee-tz") and the associated "reserved-memory" are deactivated in kernel device tree when OP-TEE is not detected by U-Boot to prevent kernel issue (memory is reserved but not used, optee driver probe failed). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14stm32mp1: move MTDPART configuration in KconfigPatrick Delaunay
This patch reduces the stm32mp1 environment size and builds dynamically the MTD partitions with information from defconfig (CONFIG_MTDPARTS_...). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14stm32mp1: dynamically build DFU_ALT_INFOPatrick Delaunay
This patch reduces the stm32mp1 environment size and builds dynamically the DFU board configuration with gpt and mtd partitions and information from defconfig (CONFIG_DFU_ALT_RAM0). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: move set_dfu_alt_info in st common directoryPatrick Delaunay
Move the stm32mp1 common code set_dfu_alt_info() in common directory, this patch reduce the maintenance effort on this generic part (not board dependent). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: move board_get_mtdparts in st common directoryPatrick Delaunay
Move the stm32mp1 common code board_get_mtdparts() in common directory, this patch reduce the maintenance effort on this generic part (not board dependent). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14ARM: stm32: Implement DDR3 coding on DHCOR SoMMarek Vasut
The DHCOR board does exist in multiple variants with different DDR3 DRAM sizes. To cater for all of them, implement DDR3 code handling. There are two GPIOs which code the DRAM size populated on the SoM, read them out and use the value to pick the correct DDR3 config. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14ARM: dts: stm32: Rework DDR DT inclusionMarek Vasut
Adjust the DDR configuration dtsi such that they only generate the DRAM configuration node, the DDR controller node is moved into the stm32mp157-u-boot.dtsi itself. This permits including multiple DDR configuration dtsi files in board DT. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14ram: stm32mp1: Add support for multiple configsMarek Vasut
Add support for multiple DRAM configuration subnodes, while retaining the support for a single flat DRAM configuration node. This is useful on systems which can be manufactured in multiple configurations and where the DRAM configuration can be determined at runtime. The code is augmented by a function which can be overridden on board level, allowing a match on the configuration node name, very much like the fitImage configuration node name matching works. The default match is on the single top-level DRAM configuration, if matching on subnodes is required, then this board_stm32mp1_ddr_config_name_match() must be overridden. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14ARM: stm32: Implement board coding on AV96Marek Vasut
The AV96 board does exist in multiple variants. To cater for all of them, implement board code handling. There are two GPIOs which code the type of the board, read them out and use the value to pick the correct device tree from an fitImage. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Change-Id: Iddb330b9a66500495885457cbe17edc0eacaaf43
2020-05-14ARM: stm32: Add board_early_init_f() to SPLMarek Vasut
Add weak implementation of board_early_init_f() hook into the STM32MP1 SPL. This can be used to read out e.g. configuration straps before initializing the DRAM. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14ARM: stm32: Add default config for DHCORMarek Vasut
Add default U-Boot configuration for the DHCOR SoM on AV96 board. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-13Merge tag 'arc-fixes-for-2020.07-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-arc Here we improve clock support for recently introduced HSDK-4xD board as well as finally enable external reset for the USB controller, which is needed to recover USB functionality after "usb reset".
2020-05-13ARC: HSDK: add reset for EHCIEugeniy Paltsev
Add reset phandle to EHCI device tree node to make on-chip reset controller usable with EHCI. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13ARC: HSDK: anounce state of BIM switchEugeniy Paltsev
Anounce state of BIM switch which defines if U-boot is loaded and started by preloader or not. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13ARC: DTS: cleanup USB node namesEugeniy Paltsev
Remove redundant '0x' from node names. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: add separate clock map for HSDK-4xDEugeniy Paltsev
HSDK and HSDK-4xD clock trees are slightly different. commit 1dfb2ec0d7fb ("ARC: HSDK: CGU: add support for timer clock") introduce regression for HSDK board cause crash when setting tunnel clock. Fix that. Fixes: 1dfb2ec0d7fb ("ARC: HSDK: CGU: add support for timer clock") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: define clock map with DT binding constantsEugeniy Paltsev
Define clock map with DT binding constants so clock map can be discontinuous. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: make set_clock optionalEugeniy Paltsev
We don't want to allow change some clocks, i.e. DDR clock. So allow to have set_clock to be unset in clock map. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: prepare for multiple clock maps supportEugeniy Paltsev
The clock trees of HSDK and HSDK-4xD vary so we need to prepare CGU driver for multiple clock maps support. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: driver cleanupEugeniy Paltsev
Minor code cleanup to improve readability. No functional change intended. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: use appropriate config data typesEugeniy Paltsev
* constify clocks config data where is possible * use more appropriate data types for clocks config Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: drop unused offsetEugeniy Paltsev
Drop creg_div_oft offset as it doesn't vary (due to it is used for CPU PLL only). Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13CLK: ARC: HSDK: avoid code duplicationEugeniy Paltsev
hsdk_axi_clk_cfg and hsdk_tun_clk_cfg clock divider structures and functions for their processing are almost the same so merge them to avoid code duplication. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13rpi: use the newly-added RPI_EFI_NR_SPIN_PAGESKyle Evans
Some systems may use a slightly larger stub to do PSCI for booting the RPi family. The number of pages has been made configurable so that operating systems building U-Boot for use in these kinds of environments can reserve more memory in the EFI memory map. Signed-off-by: Kyle Evans <kevans@FreeBSD.org> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-13rpi: Kconfig option for initial page reservationKyle Evans
While the nearly-universal default for the Raspberry Pi family is to use spin tables and the spin table implementation provided by the Raspberry Pi Foundation, FreeBSD and others may use a PSCI implementation instead. Accommodate these setups by allowing them to configure for more than one page to be reserved in the initial reservation. The default reservation remains as one page. Signed-off-by: Kyle Evans <kevans@FreeBSD.org> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-13configs: rpi_arm64: enable SDHCI SDMA supportMatthias Brugger
RPi4 supports SDMA on it's SDHCI controller. Enable to option for the combine RPi3/4 config. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-13mmc: sdhci: Use debug for not supported SDMA info messageMatthias Brugger
If CONFIG_MMC_SDHCI_SDMA is enabled but the HW could not support it, we no longer error out. Instead we do not enable it in the host. Change the output from printf to debug as this isn't an error but only additional information now. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
- Two DWC3 fixes
2020-05-12Merge tag 'u-boot-amlogic-20200511' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Enable USB Host for Odroid-C2 board - Add Open-Drain/Open-Source emulation in GPIO uclass
2020-05-12configs: rpi_arm64: sync env size with rpi_{3,4}_defconfigMarek Szyprowski
Use the same environment size as the configs dedicated for rpi3 and rpi4. This allows to switch between the builds and not to loose the settings stored on the SD card. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12configs: rpi_4 : enable SDHCI_SDMA configJaehoon Chung
Enable SDHCI_SDMA configuration. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12mmc: sdhci: not return error when SDMA is not supportedJaehoon Chung
If Host controller doesn't support SDMA, it doesn't need to return error. Because it can be worked with PIO mode. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12mmc: sdhci: use phys2bus macro when dma address is accessedJaehoon Chung
Use phys2bus macro when dma address is accessed. Some targets need to use pyhs2bus macro. (e.g, RPI4) After applied it, SDMA mode can be used. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12arm: bcm283x: serial: Move ofdata reading to probe() methodSimon Glass
We cannot rely on a parent bus that needs to be probed, until we know that it is probed. That means that code in the ofdata_to_platdata() method cannot rely on the parent bus being probed. Move the ofdata code in the two serial drivers into a probe() method. This fixes serial output on rpi_3b_32b with the following config.txt options: enable_uart=1 gpu_freq=250 Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12arm: dts: bcm283x: Allow UARTs to work before relocationSimon Glass
At present the pinctrl nodes are not enabled in pre-relocation U-Boot so the UARTs do not correctly select the pinconfig to enable the UART pins. Fix this so that the U-Boot banner is printed. This fixes serial output on rpi_3b_32b with the following config.txt options: enable_uart=1 gpu_freq=250 Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 9821636b64 (bcm2835_pinctrl: Probe pre-reloc) Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12net: bcmgenet: Don't set ID_MODE_DIS when not using RGMIINicolas Saenz Julienne
As per Linux's driver, ID_MODE_DIS is only set when the PHY interface is RGMII. Don't enable it for the rest of setups. This has been seen to misconfigure RPi4's PHY when booting Linux. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12usb: dwc3: Add versal compatibility string to dwc3 glue idsSiva Durga Prasad Paladugu
Xilinx Versal platform uses dwc3 and hence its compatible string needs to be added to dwc3 glue ids. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-12usb: dwc3: add dis_del_phy_power_chg_quirkJagan Teki
Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit, which specifies whether disable delay PHY power change from P0 to P1/P2/P3 when link state changing from U0 to U1/U2/U3 respectively. Reference from below Linux commit, commit <00fe081dc3a3> ("usb: dwc3: add dis_del_phy_power_chg_quirk") Cc: Marek Vasut <marex@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-11Prepare v2020.07-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-11Merge tag 'efi-2020-07-rc2-4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc2-4 This pull request comprises: * bug fixes * documentation fixes * a new function to determine u16 string sizes and its unit test
2020-05-11Merge tag 'ti-v2020.07-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix boot issues on Nokia RX-51 - Configure AM6 CPSW for 10Mbps in rgmii mode. - Minor changes for J721e
2020-05-11Merge tag 'u-boot-imx-20200511' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2020.07 ---------------- - i.MX NAND and nandbxb for i.MX8M - imx8MM : new beacon devkit - imx8MQ : new pico-imx8MQ - imx8QXP : extend to enable M4, fixes - add thermal support - caches in SPL (missing board) - Fixes Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/685391011
2020-05-11test: dm: update test for open-drain/open-source emulation in gpio-uclassNeil Armstrong
Add tests for testing open-drain/open-source emulation in gpio-uclass. It also adds two test3-gpios configured as GPIO_ACTIVE_LOW. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-26 17:19:37 +0000