summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-07configs: enable DM_USB and DM_USB_DEV for all DRA7 platformsJean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07dts: dra7x: make ocp2scp@4a080000 compatible with simple-busJean-Jacques Hiblot
This is required when DM_USB is used, to bind the USB phys. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07board; ti: am57xx: turn on USB clocksVignesh R
Enable USB clocks in late init stage to support ports under DM_USB. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07board: ti: dra7xx-evm: turn on USB clocks in late init stageJean-Jacques Hiblot
For USB ports that use the Driver Model, turn on the clocks during the late init stage. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07dwc3-generic: Add support for the TI DWC3 glueJean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07phy: Add a new driver for OMAP's USB2 PHYsJean-Jacques Hiblot
This drivers supports the USB2 PHY found on omap5 and dra7 SOCs. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07phy: ti-pip3-phy: Add support for USB3 PHYVignesh R
Add support to handle USB3 PHYs present on AM57xx/DRA7xx SoCs. This is needed to move AM57xx to DM_USB. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07syscon: dm: Add a new method to get a regmap from DTSJean-Jacques Hiblot
syscon_regmap_lookup_by_phandle() can be used to get the regmap of a syscon device from a reference in the DTS. It operates similarly to the linux version of the namesake function. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-07usb: dwc3: Fix a compilation error with the edison defconfigJean-Jacques Hiblot
The error is: In file included from include/part.h:10:0, from include/usb.h:18, from include/linux/usb/gadget.h:22, from drivers/usb/dwc3/ep0.c:20: include/ide.h:62:14: error: unknown type name ‘uchar’ void ide_led(uchar led, uchar status); Fixing it by including common.h that defines the uchar type. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dwc3-generic: Add select_dr_mode operationJean-Jacques Hiblot
The select_dr_mode operation is executed when the glue driver is probed. The role of this optional function is to configure the operating mode of the controller at the glue level. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dwc3-generic: Handle the PHYs, the clocks and the reset linesJean-Jacques Hiblot
This make the driver more generic. At this point this driver can replace the dwc3-of-simple implementation. Make the description in the Kconfig more generic too. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07configs: evb-rk3328: Enable CONFIG_USB_DWC3Jean-Jacques Hiblot
This is now required because the PHY operations used by xhci-dwc3 are part of the dwc3 core. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dm: usb: create a new UCLASS ID for USB gadget devicesJean-Jacques Hiblot
UCLASS_USB_DEV_GENERIC was meant for USB devices connected to host controllers, not gadget devices. Adding a new UCLASS for gadget devices alone. Also move the generic DM code for USB gadgets in a separate file for clarity. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dwc3: move phy operation to core.cJean-Jacques Hiblot
Those operations can be used for peripheral operation as well as host operation. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> # Conflicts: # drivers/usb/dwc3/core.c # drivers/usb/host/xhci-dwc3.c
2018-12-07dwc3_generic: do not probe the USB device driver when it's boundJean-Jacques Hiblot
The driver will be probed when usb_gadget_initialize() is called. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07usb: udc: implement DM versions of ↵Jean-Jacques Hiblot
usb_gadget_initialize()/_release()/_handle_interrupt() When DM_USB_GADGET the platform code for the USB device must be replaced by calls to a USB device driver. usb_gadget_initialize() probes the USB device driver. usb_gadget_release() removes the USB device driver. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-07usb: introduce a separate config option for DM USB deviceJean-Jacques Hiblot
Using CONFIG_DM_USB for this purpose prevents using DM_USB for host and not for device. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-07usb: gadget: Do not call board_usb_xxx() directly in USB gadget driversJean-Jacques Hiblot
Add 2 functions to wrap the calls to board_usb_init() and board_usb_cleanup(). This is a preparatory work for DM support for UDC drivers (DM_USB_GADGET). Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-06rockchip: rk3399: Add MAINTAINERS entryTom Rini
Add an entry for the Ficus EE board to the existing rock960 MAINTAINERS file. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-06Merge tag 'for-master-20181206' of git://git.denx.de/u-boot-rockchipTom Rini
- Changes the declaration of regs_phy in dwc2-otg to uintptr_t to ensure it can be cast to void* for use with writel(). - Add the Rock960 and Ficus boards.
2018-12-06rockchip: rk3399: Add Ficus EE board supportManivannan Sadhasivam
Add board support for Ficus EE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * Gigabit Ethernet * USB 2.0 * MMC Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> [Reworked based on common Rock960 family support] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add Rock960 CE board supportManivannan Sadhasivam
Add board support for Rock960 CE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * USB 2.0 * MMC This commit also adds DDR configuration for LPDDR3-2GiB-1600MHz which is being used on the board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add common Rock960 family from VamrsManivannan Sadhasivam
Rock960 is a family of boards based on Rockchip RK3399 SoC from Vamrs. It consists of Rock960 (Consumer Edition) and Ficus (Enterprise Edition) 96Boards. Below are some of the key differences between both Rock960 and Ficus boards: 1. Different host enable GPIO for USB 2. Different power and reset GPIO for PCI-E 3. No Ethernet port on Rock960 The common board support will be utilized by both boards. The device tree has been organized in such a way that only the properties which differ between both boards are placed in the board specific dts and the reset of the nodes are placed in common dtsi file. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [Added instructions for SD card boot] Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2018-12-06arm: dts: rockchip: add some common pin-settings to rk3399Randy Li
Those pins would be used by many boards. Commit grabbed from Linux: commit b41023282d07b61a53e2c9b9508912b1e7ce7b4f Author: Randy Li <ayaka@soulik.info> Date: Thu Jun 21 21:32:10 2018 +0800 arm64: dts: rockchip: add some common pin-settings to rk3399 Those pins would be used by many boards. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06usb: dwc2-otg: make regs_phy (in platdata) a uintptr_tPhilipp Tomsich
The regs_phy field of the platform data structure for dwc2-otg is today declared an unsigned int, but will eventually be cast into a void* for a writel operation. This triggers errors on modern GCC versions. E.g. we get the following error with GCC 6.3: drivers/usb/phy/rockchip_usb2_phy.c: In function 'property_enable': arch/arm/include/asm/io.h:49:29: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) ^ arch/arm/include/asm/io.h:117:48: note: in expansion of macro '__arch_putl' #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) ^~~~~~~~~~~ drivers/usb/phy/rockchip_usb2_phy.c:61:2: note: in expansion of macro 'writel' writel(val, pdata->regs_phy + reg->offset); ^~~~~~ This commit changes regs_phy to be a uintptr_t to ensure that it is large enough to hold any valid pointer (and fix the associated warning). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-05Merge tag 'dm-pull-5dec18' of git://git.denx.de/u-boot-dmTom Rini
Minor sandbox enhancements / fixes tpm improvements to clear up v1/v2 support buildman toolchain fixes New serial options to set/get config
2018-12-05Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- Various MTD fixes from Boris - Zap various unused / legacy paths. - pxa3xx NAND update from Miquel Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-06mtd: sf: Make sf_mtd.c more robustBoris Brezillon
SPI flash based MTD devs can be registered/unregistered at any time through the sf probe command or the spi_flash_free() function. This commit does not try to fix the root cause as it would probably require rewriting most of the code and have an mtd_info object instance per spi_flash object (not to mention that the the spi-flash layer is likely to be replaced by a spi-nor layer ported from Linux). Instead, we try to be as safe as can be by checking the code returned by del_mtd_device() and complain loudly when there's nothing we can do about the deregistration failure. When that happens we also reset sf_mtd_info.priv to NULL, and check for NULL pointer in the mtd hooks so that -ENODEV is returned instead of hitting a NULL pointer dereference exception when the MTD instance is later accessed by a user. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de>
2018-12-06mtd: sf: Unregister the MTD device prior to removing the spi_flash objBoris Brezillon
The DM implementation of spi_flash_free() does not unregister the MTD device before removing the spi dev object. This leads to a use-after-free bug when the MTD device is later accessed by a MTD user (observed when attaching the device to UBI after env_sf_load() has called spi_flash_free()). Implement ->remove() and call spi_flash_mtd_unregister() from there. Fixes: 9fe6d8716e09 ("mtd, spi: Add MTD layer driver") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-12-06mtd: Don't stop MTD partition creation when it fails on one deviceBoris Brezillon
MTD partition creation code is a bit tricky. It tries to figure out when things have changed (either MTD dev list or mtdparts/mtdids vars) and when that happens it first deletes all the partitions that had been previously created and then creates the new ones based on the new mtdparts/mtdids values. But before deleting the old partitions, it ensures that none of the currently registered parts are being used and bails out when that's not the case. So, we end up in a situation where, if at least one MTD dev has one of its partitions used by someone (UBI for instance), the partitions update logic no longer works for other devs. Rework the code to relax the logic and allow updates of MTD parts on devices that are not being used (we still refuse to updates parts on devices who have at least one of their partitions used by someone). Fixes: 5db66b3aee6f ("cmd: mtd: add 'mtd' command") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de>
2018-12-06mtd: Make sure we don't parse MTD partitions belonging to another devBoris Brezillon
The mtdparts variable might contain partition definitions for several MTD devices. Each partition layout is separated by a ';', so let's make sure we don't pick a wrong name when mtdparts is malformed. Fixes: 5db66b3aee6f ("cmd: mtd: add 'mtd' command") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de>
2018-12-06mtd: Make sure the name passed in mtdparts fits in mtd_name[]Boris Brezillon
The local mtd_name[] variable is limited in size. Return an error if the name passed in mtdparts does not fit in this local var. Fixes: 5db66b3aee6f ("cmd: mtd: add 'mtd' command") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de>
2018-12-06mtd: Be more strict on the "mtdparts=" prefix checkBoris Brezillon
strstr() does not guarantee that the string we're searching for is placed at the beginning. Use strncmp() instead. Fixes: 5db66b3aee6f ("cmd: mtd: add 'mtd' command") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de>
2018-12-06mtd: Use get_mtdids() instead of env_get("mtdids") in ↵Boris Brezillon
mtd_search_alternate_name() The environment is not guaranteed to contain a valid mtdids variable when called from mtd_search_alternate_name(). Call get_mtdids() instead of env_get("mtdids"). Fixes: ff4afa8a981e ("mtd: uboot: search for an equivalent MTD name with the mtdids") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de>
2018-12-06mtd: sf: Make sure we don't register the same device twiceBoris Brezillon
spi_flash_mtd_register() can be called several times and each time it will register the same mtd_info instance like if it was a new one. The MTD ID allocation gets crazy when that happens, so let's track the status of the sf_mtd_info object to avoid that. Fixes: 9fe6d8716e09 ("mtd, spi: Add MTD layer driver") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-12-06mtd: Delete partitions attached to the device when a device is deletedBoris Brezillon
If we don't do that, partitions might still be exposed while the underlying device is gone. Fixes: 2a74930da57f ("mtd: mtdpart: implement proper partition handling") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de>
2018-12-06mtd: Parse mtdparts/mtdids again when the MTD list has been updatedBoris Brezillon
Updates to the MTD device list should trigger a new parsing of the mtdids/mtdparts vars even if those vars haven't changed. Fixes: 5db66b3aee6f ("cmd: mtd: add 'mtd' command") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de>
2018-12-06mtd: Add a function to report when the MTD dev list has been updatedBoris Brezillon
We need to parse mtdparts/mtids again everytime a device has been added/removed from the MTD list, but there's currently no way to know when such an update has been done. Add an ->updated field to the idr struct that we set to true every time a device is added/removed and expose a function returning the value of this field and resetting it to false. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Heiko Schocher <hs@denx.de>
2018-12-05x86: acpi: Generate SPCR tableAndy Shevchenko
Microsoft specifies a SPCR (Serial Port Console Redirection Table) [1]. Let's provide it in U-Boot. [1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05x86: acpi: Add SPCR table descriptionAndy Shevchenko
Add SPCR table description as it provided in Linux kernel. Port subtype for ACPI_DBG2_SERIAL_PORT is used as an interface type in SPCR. Thus, provide a set of definitions to be utilized later. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-05serial: ns16550: Provide ->getinfo() implementationAndy Shevchenko
New callback will supply necessary information, for example, to ACPI SPCR table. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05Merge git://git.denx.de/u-boot-riscvTom Rini
- Fix BBL may be corrupted problem. - Support U-Boot run in S-mode.
2018-12-05Merge tag 'video-updates-for-2019.01-rc2' of git://git.denx.de/u-boot-videoTom Rini
video, bmp and cls command updates
2018-12-05serial: ns16550: Read reg-io-width from device treeAndy Shevchenko
Cache the value of the reg-io-width property for the future use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05serial: ns16550: Group reg_* members of ns16550_platdataAndy Shevchenko
Group reg_* members of struct ns16550_platdata together for better maintenance. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05dm: serial: Introduce ->getinfo() callbackAndy Shevchenko
New callback will give a necessary information to fill up ACPI SPCR table, for example. Maybe used later for other purposes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Change ADR_SPACE_SYSTEM_IO to SERIAL_ADDRESS_SPACE_IO to fix build error: Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05dm: serial: Add ->getconfig() callbackAndy Shevchenko
In some cases it would be good to know the settings, such as parity, of current serial console. One example might be an ACPI SPCR table to generate using these parameters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05power: regulator: denied disable on always-on regulatorPatrick Delaunay
Don't disable regulator which are tagged as "regulator-always-on" in DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jack Mitchell <jack@embed.me.uk> Tested-by: Jack Mitchell <jack@embed.me.uk> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Richard Röjfors <richard@puffinpack.se> Tested-by: Richard Röjfors <richard@puffinpack.se> Reviewed-by: Felix Brack <fb@ltec.ch> Tested-by: Felix Brack <fb@ltec.ch>
2018-12-05dm: core: add functions to get/remap I/O addresses by nameÁlvaro Fernández Rojas
This functions allow us to get and remap I/O addresses by name, which is useful when there are multiple reg addresses indexed by reg-names property. This is needed in bmips dma/eth patch series, but can also be used on many other drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05binman: Add myself as maintainerSimon Glass
Add an entry for my maintainership of this tool. Signed-off-by: Simon Glass <sjg@chromium.org>