summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-18video: meson: add compatible for Amlogic G12ANeil Armstrong
Finally add the Amlogic G12A SoC compatible for the VPU driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18video: meson: sync with linux drm-misc treeNeil Armstrong
Synchronize the Amlogic Meson Video driver back with the latest DRM misc tree, adding G12A platform support, from the latest commit: 528a25d040bc ("drm: meson: use match data to detect vpu compatibility") The sync includes the following changes from Linux adapted to U-Boot: - Add support for VIC alternate timings - Switch PLL to 5.94GHz base for 297Mhz pixel clock - Add registers for G12A SoC - Add G12A Support for VPP setup - Add G12A Support for VIU setup - Add G12A support for OSD1 Plane - Add G12A support for plane handling in CRTC driver - Add G12A support for CVBS Encoder - Add G12A Video Clock setup - Add G12A support for the DW-HDMI Glue - fix G12A HDMI PLL settings for 4K60 1000/1001 variations - fix primary plane disabling - fix G12A primary plane disabling - mask value when writing bits relaxed - crtc: drv: vpp: viu: venc: use proper macros instead of magic constants - global clean-up - add macro used to enable HDMI PLL - venc: set the correct macrovision max amplitude value Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18video: meson: remove power domain getNeil Armstrong
Remove getting and enabling the node power domain since it's now handled by the dm core directly. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18clk: meson: g12a: add support for VPU/HDMI clocksNeil Armstrong
Add necessary clock support to set up clock for the VPU and HDMI support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18power: domain: meson-gx-pwrc: add G12A supportNeil Armstrong
Add Amlogic G12A support for the gx-pwrc driver, aligned on the Linux v5.2 driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18board: amlogic: document alternative libretech-cc installation methodsDaniel Drake
As already documented in this README, several binaries must be glued together in order to boot the device. Extend the documentation to cover the prebuilt binaries (saving you the hassle of installing ancient cross-compilers), and also mention the open source replacements for the encryption tool (which is especially useful if you want to avoid requiring 32-bit x86 binaries in your build system). Signed-off-by: Daniel Drake <drake@endlessm.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18RISC-V: Align boot image header with LinuxAtish Patra
The released Linux boot image header in v5.3 is different from the one present in U-Boot. Align the header with the new version. The changes in Linux are backward compatible. Previous U-Boot releases with older header will continue to work as well. As v5.3 kernel is the first one to support image header, there is no compatibility issue between new U-Boot (with this patch) and older kernel. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Rick Chen <rick@andestech.com>
2019-10-18configs: fu540: enable gpio driverSagar Shrikant Kadam
Enable the DM based GPIO driver for FU540-C000 SoC. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-18gpio: sifive: add support for DM based gpio driver for FU540-SoCSagar Shrikant Kadam
This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-17efi_loader: enable CONFIG_CMD_NVEDIT_EFI on QEMUHeinrich Schuchardt
To reduce the default image size CONFIG_CMD_NVEDIT_EFI was disabled by default. Re-enable it on the QEMU platforms supporting the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17efi_loader: disk: install FILE_SYSTEM_PROTOCOL only if availableAKASHI Takahiro
In the current implementation, EFI_SIMPLEFILE_SYSTEM_PROTOCOL is always installed to all the partitions even if some of them may house no file system. With this patch, that protocol will be installed only if any file system exists. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17fs: add fs_get_type() for current filesystem typeAKASHI Takahiro
This function is a variant of fs_get_type_name() and returns a filesystem type with which the current device is associated. We don't want to export fs_type variable directly because we have to take care of it consistently within fs.c. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17fs: clean up around fs_typeAKASHI Takahiro
fs_ls(), fs_mkdir() and fs_unlink() sets fs_type to FS_TYPE_ANY explicitly, but it is redundant as they call fs_close(). So just remove those lines. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17fs: update fs_close() descriptionHeinrich Schuchardt
Provide a more detailed description of fs_close(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17fs: export fs_close()AKASHI Takahiro
fs_close() closes the connection to a file system which opened with either fs_set_blk_dev() or fs_set_dev_with_part(). Many file system functions implicitly call fs_close(), e.g. fs_closedir(), fs_exist(), fs_ln(), fs_ls(), fs_mkdir(), fs_read(), fs_size(), fs_write() and fs_unlink(). So just export it. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17efi_loader: device_path: check against file path lengthAKASHI Takahiro
device_path strcuture has 2 bytes of "length" field, and so file path length should not exceed this limit, 65535. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17Merge tag 'for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubiTom Rini
ubi enhancements for 2020.01 - provide a way for skipping crc checks ported from linux, and add an U-Boot command to set this flag on already installed systems. - fix redundand environment management
2019-10-16Merge tag 'dm-pull-15oct19' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman enhancements: - Dropping some test Elf files and building them from source instead - Refactoring of x86 16-bit entries - Support for SPL symbols within sections - Handle the 'notes' sections and hidden symbols in recent binutils - Improved error reporting with a tool fails libfdt and documentation fixes vboot required-key test driver model power-domain controls patman Message-Id enhancement
2019-10-16Merge branch '2019-10-15-master-imports'Tom Rini
- Split travis jobs again so we don't have failures due to excessive build times. - Android image updates - cscope bugfix, update ARM maintainers entry, drop H2200 platform.
2019-10-16travis: Split and rename xilinx ARM in to two jobsTom Rini
Split the ARMv7 and AArch64 platforms into separate jobs, to avoid them taking too long to build overall. Also rename them from "Xilinx" to "Zynq*" to reflect slightly better what is being built and to pull in a few more board matches. Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-16travis: Split sun8i in to two jobsTom Rini
Split the 32bit and 64bit platforms into separate jobs, to avoid them taking too long to build overall. Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-16travis: Split i.MX jobs a bit moreTom Rini
- Split "tqc" and "technexion" out into their own jobs and exclude them from the catch-all jobs - Clarify the job labels a little more. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-10-16MAINTAINERS: Update ARM entryTom Rini
Fully take over the ARM maintainers entry. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-16Makefile: Skip symbolic links to files for cscopeAndy Shevchenko
cscope complains that it can't find files that appears to be symbolic links cscope: cannot find file tools/binman/test/u_boot_binman_syms_bad.c cscope: cannot find file tools/version.h `find -L` tests properties, but name, and cscope can't cope with symbolic links (a lot of bugs in upstream were simple closed as kinda invalid). To work around the problem, exclude symbolic links from the cscope.files. Note, it's done in two pass to speed up the process (`-exec realpath ...` approach is not portable and introduces a 3x delay). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-16arm: remove the H2200 boardHeinrich Schuchardt
U-Boot cannot be built for h2200_defconfig with CONFIG_DM=y. The maintainer Lukasz Dalek suggested to remove the board. https://lists.denx.de/pipermail/u-boot/2019-August/380685.html Cc: Lukasz Dalek <luk0104@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [trini: As this is the last non-toradex PXA board, update travis too] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-16ubi: env: fix redundand managementPhilippe Reynes
We check (with a #if defined()) the config ENV_UBI_VOLUME_REDUND to know if there is a redundant env. But this config is a string and is always defined with env is in ubi, so we always consider that a redundand env is used. To fix this issue, I've added a hidden flag ENV_UBI_IS_VOLUME_REDUND that is true when ENV_UBI_VOLUME_REDUND is not "". Then, I check this flag in the code, instead of the string ENV_UBI_VOLUME_REDUND. hs: fixed typo s/condider/consider Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-10-16ubi: Add "skipcheck" command to set/clear this bit in the UBI volume hdrStefan Roese
U-Boot now supports the "skip_check" flag to optionally skip the CRC check at open time. Currently its only possible to set this bit upon UBI volume creation. But it might be very useful to also set this bit on already installed systems (e.g. field upgrade) to make also use of the boot-time decrease on those systems. This patch now adds a new "ubi" command "ubi skipcheck" to set or clear this bit in the UBI volume header: => ubi skipcheck rootfs0 on Setting skip_check on volume rootfs0 BTW: This saves approx. 10 seconds Linux bootup time on a MT7688 based target with 128MiB of SPI NAND. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Quentin Schulz <quentin.schulz@bootlin.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Dannenberg <dannenberg@ti.com>
2019-10-16ubi: Print skip_check in ubi_dump_vol_info()Stefan Roese
It might be interesting, if "skip_check" is set or not, so lets print this flag in ubi_dump_vol_info() as well. hs: fix typo in commit message Signed-off-by: Stefan Roese <sr@denx.de> Cc: Quentin Schulz <quentin.schulz@bootlin.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-10-16ubi: provide a way to skip CRC checksQuentin Schulz
Some users of static UBI volumes implement their own integrity check, thus making the volume CRC check done at open time useless. For instance, this is the case when one use the ubiblock + dm-verity + squashfs combination, where dm-verity already checks integrity of the block device but this time at the block granularity instead of verifying the whole volume. Skipping this test drastically improves the boot-time. Adapted to U-Boot by Stefan Roese. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Quentin Schulz <quentin.schulz@bootlin.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-15sandbox: fix build error due to missing struct udevice definitionAKASHI Takahiro
Without this patch, compiling may potentially fail. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15dm: Tidy up dump output when there are many devicesPatrick Delaunay
At present the 'Index' column of 'dm tree' assumes there is two digits, this patch increase it to 3 digits. It also aligns output of 'dm uclass', assuming the same 3 digits index. The boards with CONFIG_PINCTRL_FULL activated have one pinconfig by pin configuration, so they can have more than 100 devices pinconfig (for example with stm32mp157c-ev1 board we have 106 pinconfig node). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15dm: pinctrl: introduce PINCONF_RECURSIVE optionPatrick Delaunay
In the Linux pinctrl binding, the pin configuration nodes don't need to be direct children of the pin controller device (may be grandchildren for example). This behavior is managed with the pinconfig u-class which recursively bind all the sub-node of the pin controller. But for some binding (when pin configuration is only children of pin controller) that is not necessary. U-Boot can save memory and reduce the number of pinconf instance when this feature is deactivated (for arch stm32mp for example for SPL). This patch allows to control this feature with a new option CONFIG_PINCONF_RECURSIVE when it is possible for each individual pin controller device. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Fixed CONFIG_IF_ENABLED() condition, added __maybe_unused: Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15dm: core: device: switch off power domain after device removalAnatolij Gustschin
The power domain associated with a device is enabled when probing, but currently the domain remains enabled when the device is removed. Some boards started to disable power domains for selected devices via custom board_quiesce_devices(), but it doesn't work in many cases, i. e. because devices still can be accessed later in .remove() callback on behalf of dm_remove_devices_flags(). Utilize the DM core to power off the device power domain, but add a device flag to be able to selectively let the power domain enabled after device removal. This might be required for devices that must remain enabled when booting OS, i. e. serial console for debug output, etc. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15power: domain: Introduce dev_power_domain_offLokesh Vutla
Add dev_power_domain_off() api to disable all the power-domains corresponding to a device Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15remoteproc: k3_arm64: Enable DM_FLAG_DEFAULT_PD_CTRL_OFFLokesh Vutla
Enable DM_FLAG_DEFAULT_PD_CTRL_OFF for arm64 remote core so that pd can be enabled after loading the image. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15dm: core: Allow for not controlling the power-domain by DM frameworkLokesh Vutla
In some remoteproc cases, enabling the power domain of the core will start running the core. In such cases image should be loaded before enabling the power domain. But the current DM framework enables the power-domain by default during probe. This is causing the remotecore to start and crash as there is no valid image loaded. In order to avoid this introduce a DM flag that doesn't allow for enabling/disabling the power-domain by DM framework. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15dm: device: Fix typo in the non-DEVRES version of devm_kmalloc_array()Jean-Jacques Hiblot
When DEVRES is not set, devm_kmalloc_array() is spelled devm_kmaloc_array() (with one 'l' only). Fixing it so that the name is the same with and without DEVRES. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15patman: Use the Change-Id, version, and prefix in the Message-IdDouglas Anderson
As per the centithread on ksummit-discuss [1], there are folks who feel that if a Change-Id is present in a developer's local commit that said Change-Id could be interesting to include in upstream posts. Specifically if two commits are posted with the same Change-Id there's a reasonable chance that they are either the same commit or a newer version of the same commit. Specifically this is because that's how gerrit has trained people to work. There is much angst about Change-Id in upstream Linux, but one thing that seems safe and non-controversial is to include the Change-Id as part of the string of crud that makes up a Message-Id. Let's give that a try. In theory (if there is enough adoption) this could help a tool more reliably find various versions of a commit. This actually might work pretty well for U-Boot where (I believe) quite a number of developers use patman, so there could be critical mass (assuming that enough of these people also use a git hook that adds Change-Id to their commits). I was able to find this git hook by searching for "gerrit change id git hook" in my favorite search engine. In theory one could imagine something like this could be integrated into other tools, possibly even git-send-email. Getting it into patman seems like a sane first step, though. NOTE: this patch is being posted using a patman containing this patch, so you should be able to see the Message-Id of this patch and see that it contains my local Change-Id, which ends in 2b9 if you want to check. [1] https://lists.linuxfoundation.org/pipermail/ksummit-discuss/2019-August/006739.html Signed-off-by: Douglas Anderson <dianders@chromium.org>
2019-10-15cmd: aes: use map_sysmem when accessing memoryPhilippe Reynes
The aes command used to segfault when accessing memory in sandbox. The pointer accesses should be mapped. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-15sandbox64: enable command aesPhilippe Reynes
This commit add the support of command aes. Then, it may be used on pytest. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-15sandbox: enable command aesPhilippe Reynes
This commit enable the command aes on sandbox. Then, it may be used on pytest. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-15libfdt: fix typo on commentGiulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2019-10-15rsa: Return immediately if required-key verification failsDaniele Alessandrelli
Currently, if image verification with a required key fails, rsa_verify() code tries to find another key to verify the FIT image. This however, is not the intended behavior as the documentation says that required keys "must be verified for the image / configuration to be considered valid". This patch fixes the issue by making rsa_verify() return immediately if the verification of a required key fails. Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
2019-10-15pytest: vboot: add a test for required keyPhilippe Reynes
This commit add a test in the vboot test to check that when a required key is asked, only FIT signed with this key is used/accepted by u-boot. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-15dm: pinctrl: Skip not associated gpio phandle and rise a warning messageMichael Trimarchi
Skip not associated gpio phandle let register the other gpios on a group. We need anyway to send out a warning to the user to fix their uboot-board.dtsi. Thhe handle id can be found inside the decompiled dtb dtc -I dtb -O dts -o devicetree.dts spl/u-boot-spl.dtb Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15core: device: use dev_power_domain_onPeng Fan
When multiple power domains attached to a device, need power on them all, so use dev_power_domain_on to do that. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-15power: domain: add dev_power_domain_onPeng Fan
Add this new API to power on multiple domains attached to a device. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Changed to static inline and added a condition into C file: Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15dm: spi: Do not assume first SPI busThomas Fitzsimmons
When CONFIG_OF_PRIOR_STAGE is enabled, this workaround was needed before device_bind_common assigned request numbers sequentially in the absence of aliases. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org>
2019-10-15dm: device: Request next sequence numberThomas Fitzsimmons
For CONFIG_OF_PRIOR_STAGE, in the absence of a device tree alias for a given device, use the next request number for that type of device. This allows aliases to be used when they're available, while still allowing unaliased devices to be probed. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org>
2019-10-15tpm2: Don't assume active low reset valueKayla Theil
The reset function sets the pin to 0 then 1 but if the pin is marked ACTIVE_LOW in the DT it gets inverted and leaves the TPM in reset. Let the gpio driver take care of the reset polarity. Signed-off-by: Kayla Theil <kayla.theil@mixed-mode.de>
generated by cgit (git 2.34.1) at 2024-12-25 04:13:01 +0000