summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-24ARM: rmobile: Convert CONFIG_R8A77xx to KconfigMarek Vasut
Convert these configuration options to Kconfig, update board defconfigs and drop them from whitelist. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-24ARM: dts: rmobile: Factor out U-Boot extrasMarek Vasut
Pull out u-boot extras into dtsi files to make synchronization of DTS from Linux kernel as easy as a simple copy. All the U-Boot extras are now in *-u-boot.dts* files instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-24ARM: dts: rmobile: Update DTS to match Linux 4.14Marek Vasut
Import the RCar Gen3 DTS and headers from upstream Linux kernel v4.14, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . This includes both M3 and H3 ULCB and Salvator-X boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-23Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-01-23armv8: ls1088a: Add IFC and eMMC as qixis boot sourcesAshish Kumar
Add macro QIXIS_LBMAP_EMMC, QIXIS_LBMAP_IFC, QIXIS_RCW_SRC_IFC, QIXIS_RCW_SRC_EMMC to enable IFC and eMMC as boot sources for qixis commands. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> [YS: Modify subject and add commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23fsl: common: qixis: Add ifc and emmc switching via qixisAshish Kumar
Currently only SD, NAND can be secondary boot sources controlled by FPGA/CPLD via qixis commands. For SoC like LS1088 IFC-NOR can be secondary boot source, while QSPI-NOR is the primary. Add options in qixis to switch to other boot sources including ifc and emmc. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23crypto/fsl: Fix HW accelerated hash commandsBreno Lima
The hash command function were not flushing the dcache before passing data to CAAM/DMA and not invalidating the dcache when getting data back. Due the data cache incoherency, HW accelerated hash commands used to fail with CAAM errors like "Invalid KEY Command". Check if pbuf and pout buffers are properly aligned to the cache line size and flush/invalidate the memory regions to address this issue. This solution is based in a previous work from Clemens Gruber in commit 598e9dccc75d ("crypto/fsl: fix BLOB encapsulation and decapsulation") Reported-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23ARM: dts: Freescale: re-license device tree files under GPLv2+/X11Pankaj Bansal
The current GPL only licensing on the device trees makes it very impractical for other software components licensed under another license. To make it easier to reuse them, re-license the the device trees for Freescale (now NXP) SoCs and boards under GPLv2+/X11 dual license. Same trend is followed in linux. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23armv8: ls1088a: vid: Compiling VID specific functions for SPLRajesh Bhagat
Enables and compiles VID specific functions for SPL. Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23ls1088a: Add VID support for QDS and RDB platformsRajesh Bhagat
This patch adds the support for VID on LS1088AQDS and LS1088ARDB systems. It reads the fusesr register and changes the VDD accordingly by adjusting the voltage via LTC3882 regulator. This patch also takes care of the special case of 0.9V VDD is present in fusesr register. In that case,it also changes the SERDES voltage by disabling the SERDES, changing the SVDD and then re-enabling SERDES. Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23common: board_f: vid: Add VID specific API to adjust core voltageRajesh Bhagat
Adds a VID specific API in init_sequence_f and spl code flow namely init_func_vid which is required to adjust core voltage. VID specific code is required in spl, hence moving flag CONFIG_VID out of spl flags. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23ls1088a: ddr: configure DDR for 0.9v for VID supportRajesh Bhagat
When VID feature is supported, check the contents of fuse register and configure DDR operate at 0.9v. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCsRajesh Bhagat
Sets DDR configuration parameter cdr1 before all other settings to support case 0.9v VDD is enabled for some SoCs Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23board: common: vid: Add support for LTC3882 voltage regulator chipRajesh Bhagat
Restructures common driver to support LTC3882 voltage regulator chip. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23Kconfig: Add LTC3882 voltage regulator configRajesh Bhagat
Adds below LTC3882 voltage regulator config: CONFIG_VOL_MONITOR_LTC3882_READ CONFIG_VOL_MONITOR_LTC3882_SET Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23board: common: vid: Move IR chip specific code in flagRajesh Bhagat
Moves IR chip (IR36021) specific code in flag to resolve compilation issue where it is not present. For example, LS1088A is having a new LTC3882 voltage chip. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23board: common: vid: Add board specific vdd adjust APIRajesh Bhagat
Adds a board specific API namely board_adjust_vdd which is required to define the board VDD adjust settings. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23board: common:vid: Add LS1088A VID Supported voltage valuesRajesh Bhagat
Adds below voltage values supported by LS1088A Soc: 1.025V(default), 0.9875V, 0.9750V, 0.9V, 1.0V, 1.0125V, 1.0250V. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23armv8: lsch3: Add serdes and DDR voltage setupRajesh Bhagat
Adds SERDES voltage and reset SERDES lanes API and makes enable/disable DDR controller support 0.9V API common. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-01-23 This time around we have a lot of EFI patches from Heinrich. Highlights are: - Allow EFI applications to register as drivers - Allow exposure of U-Boot block devices from an EFI payload - Compatibility improvements
2018-01-22Revert "travis-ci: Add qemu-x86_64 target"Tom Rini
This reverts commit 998ae28799c79c6bc796aea182ae6acf13d18284. This continues to fail in travis itself, so remove for now. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-22Convert CONFIG_SOC_DA8XX et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SOC_DA8XX CONFIG_SOC_DA850 CONFIG_DA850_LOWLEVEL CONFIG_MACH_DAVINCI_DA850_EVM CONFIG_SYS_DA850_PLL_INIT CONFIG_SYS_DA850_DDR_INIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> [trini: Rework CONFIG_SYS_DA850_PLL_INIT so it's selected on SOC_DA8XX] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-22efi_selftest: reduce noise in test output for device treesHeinrich Schuchardt
Some messages are only useful if an error occurs. Fix a use after free. Add a missing free. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: allow creation of more device part nodesHeinrich Schuchardt
Create device path nodes for UCLASS_ETH udevices. Create device path nodes of block device children of UCLASS_MMC udevices. Consistently use debug for unsupported nodes. Set the log level to error. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: Fix build failure by adding #ifdef CONFIG_DM_ETH] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: provide a test for block ioHeinrich Schuchardt
This test checks the driver for block IO devices. A disk image is created in memory. A handle is created for the new block IO device. The block I/O protocol is installed on the handle. ConnectController is used to setup partitions and to install the simple file protocol. A known file is read from the file system and verified. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_driver: EFI block driverHeinrich Schuchardt
This patch provides * a uclass for EFI drivers * a EFI driver for block devices For each EFI driver the uclass * creates a handle * adds the driver binding protocol The uclass provides the bind, start, and stop entry points for the driver binding protocol. In bind() and stop() it checks if the controller implements the protocol supported by the EFI driver. In the start() function it calls the bind() function of the EFI driver. In the stop() function it destroys the child controllers. The EFI block driver binds to controllers implementing the block io protocol. When the bind function of the EFI block driver is called it creates a new U-Boot block device. It installs child handles for all partitions and installs the simple file protocol on these. The read and write functions of the EFI block driver delegate calls to the controller that it is bound to. A usage example is as following: U-Boot loads the iPXE snp.efi executable. iPXE connects an iSCSI drive and exposes a handle with the block IO protocol. It calls ConnectController. Now the EFI block driver installs the partitions with the simple file protocol. iPXE uses the simple file protocol to load Grub or the Linux Kernel. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: add comment on calloc len] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: add missing LF in test outputHeinrich Schuchardt
The output of the minicapps lacks a line feed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: store DT in EFI_RUNTIME_SERVICES_DATA memoryHeinrich Schuchardt
The device tree is needed at runtime. So we have to store it in EFI_RUNTIME_SERVICES_DATA memory. The UEFI spec recommends to store all configuration tables in EFI_RUNTIME_SERVICES_DATA memory. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: test start imageHeinrich Schuchardt
This pair of tests checks the StartImage boot service. Each test loads an EFI application into memory and starts it. One returns by calling the Exit boot service. The other returns directly. The tests are not built on x86_64 because the relocation code for the efi binary cannot be created. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: fix ExitBootServicesHeinrich Schuchardt
This patch lets the implementation of ExitBootServices conform to the UEFI standard. The timer events must be disabled before calling the notification functions of the exit boot services events. The boot services must be disabled in the system table. The handles in the system table should be defined as efi_handle_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: add check_tpl parameter to efi_signal_eventHeinrich Schuchardt
In ExitBootServices we need to signal events irrespective of the current TPL level. A new parameter check_tpl is added to efi_signal_event(). Function efi_console_timer_notify() gets some comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: provide function to get last node of a device pathHeinrich Schuchardt
On a block device and its partitions the same protocols can be installed. To tell the apart we can use the type of the last node of the device path which is not the end node. The patch provides a utility function to find this last node. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitionsHeinrich Schuchardt
Add the revision constants. Depending on the revision additional fields are needed in the media descriptor. Use efi_uintn_t for number of bytes to read or write. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: make efi_disk_create_partitions a global symbolHeinrich Schuchardt
Up to now we have been using efi_disk_create_partitions() to create partitions for block devices that existed before starting an EFI application. We need to call it for block devices created by EFI applications at run time. The EFI application will define the handle for the block device and install a device path protocol on it. We have to use this device path as stem for the partition device paths. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: provide a function to create a partition nodeHeinrich Schuchardt
Provide new function efi_dp_part_node() to create a device node for a partition. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: make efi_block_io_guid a global symbolHeinrich Schuchardt
The GUID of the EFI_BLOCK_IO_PROTOCOL is needed in different code parts. To avoid duplication make efi_block_io_guid a global symbol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: efi_disk_register: correctly determine if_type_nameHeinrich Schuchardt
The interface type name can be used to look up the interface type. Don't confound it with the driver name which may be different. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: fix StartImage bootserviceHeinrich Schuchardt
The calling convention for the entry point of an EFI image is always 'asmlinkage'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: check tables in helloworld.efiHeinrich Schuchardt
Check if the device tree and the SMBIOS table are available. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: allocate correct memory type for EFI imageHeinrich Schuchardt
The category of memory allocated for an EFI image should depend on its type (application, bootime service driver, runtime service driver). Our helloworld.efi built on arm64 has an illegal image type. Treat it like an EFI application. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: print device path when entering efi_load_imageHeinrich Schuchardt
Use %pD to print the device path instead of its address when entering efi_load_image. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: correct find simple file system protocolHeinrich Schuchardt
In contrast to the description the code did not split the device path into device part and file part. The code should use the installed protocol and not refer to the internal structure of the the disk object. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: address of the simple file system protocolHeinrich Schuchardt
When installing the the simple file system protocol we have to path the address of the structure and not the address of a pointer to the structure. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: return NULL from device path functionsHeinrich Schuchardt
For the construction of device paths we need to call the AllocatePool service. We should not ignore if it fails due to an out of memory situation. This patch changes the device path functions to return NULL if the memory allocation fails. Additional patches will be needed to fix the callers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: consistently use efi_handle_t for handlesHeinrich Schuchardt
We should consistently use the efi_handle_t typedef when referring to handles. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: test for (Dis)ConnectControllerHeinrich Schuchardt
This unit test checks the following protocol services: ConnectController, DisconnectController, InstallProtocol, UninstallProtocol, OpenProtocol, CloseProtcol, OpenProtocolInformation Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: remove todo in device path testHeinrich Schuchardt
The installation of UninstallProtocol is functional now. So we do not expect errors when calling it. Call UninstallProtocol with correct level of indirection for parameter handle. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: remove todo in manage protocolsHeinrich Schuchardt
The installation of UninstallProtocols is functional now. So we do not expect errors when calling it. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: disconnect controllers in UninstallProtocolHeinrich Schuchardt
The UninstallProtocol boot service should first try to disconnect controllers that have been connected with EFI_OPEN_PROTOCOL_BY_DRIVER. If the protocol is still opened by an agent, it should be closed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: implement DisconnectControllerHeinrich Schuchardt
Unfortunately we need a forward declaration because both OpenProtocol and CloseProtocol have to call DisconnectController. And DisconnectController calls both OpenProtcol and CloseProtocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2024-12-23 17:47:26 +0000