summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-05sh: Fix register address of SH7722.Nobuhiro Iwamatsu
The address of SH7722 is wrong by old document. This patch fixes this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-02-04new command for displaying strings at specified memory locationsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04rewrite/cleanup Blackfin RTC driverMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04generate u-boot.ldr for Blackfin targetsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04scrub unused symbolsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04move Blackfin cpu object list to respective cpu directoriesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04interface to Blackfin on-chip One-Time-Programmable memoryMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04add support for memory commands with Blackfin L1 instruction memoryMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04use C code rather than inline assemblyMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04add Blackfin-specific reginfo commandMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04add support for Blackfin symbol prefixes to examplesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04add Blackfin-specific bdinfo commandMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__Mike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04unify the Blackfin board targetsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04punt Blackfin VDSP headers and import sanitized/auto-generated onesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04always pull in asm/blackfin.h for Blackfin portsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04add missing __raw versions of Blackfin read/write io functionsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04add the default Blackfin logo used by Blackfin boards with splash screensMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04add some more Blackfin docsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04make smc91111_eeprom managment simpler by depending on the board ↵Mike Frysinger
configuration file rather than a hardcoded list of boards Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04fix building on Blackfin as the assembler supports the .set syntax, not the ↵Mike Frysinger
= syntax, for assigning symbols Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04add gitignores for Blackfin piecesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-05TFTP: add host ip addr supportJean-Christophe PLAGNIOL-VILLARD
allow to use a different server as set in serverip add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length if not defined the max length will be at 128 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-0485xx,86xx: Determine I2C clock frequencies and store in global_dataTimur Tabi
Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. Update the get_clocks() function in 85xx and 86xx to determine the I2C clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-02-05OMAP5912: fix FIFO handling in UART driverWolfgang Denk
According to the OMAP5912 Serial Interfaces Reference Guide (see http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the FIFO_EN enable bit in the FIFO Control Register (FCR) can only be changed when the baud clock is not running, i. e. when both DLL and DLH are set to 0. Thus make sure that DLL and DLH are 0 when writing the FCR. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-04ARM: S3C24x0 SoC NAND controller supportHarald Welte
This patch adds NAND support to the S3C24x0 SoC code in u-boot Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-02-04ARM: s3c24xx: Multiple serial port supportHarald Welte
This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-02-04ARM: arm920t: Allow use of 'gd' pointer from IRQHarald Welte
This patch allows us to use the 'gd' pointer (and thus environment and everything else associated with it) from interrupt context on arm920t. Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-02-04ARM: arm920/s3c24xx: IRQ demulitplexer callbackHarald Welte
This patch adds a IRQ demultiplexer callback to the arm920 cpu core code, plus a stub implementation of it for the S3C2410. The purpose is to allow arm920t implementations such as the s3c24x0 to implement interrupt handlers in u-boot without having to touch core arm920t code. Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-02-04ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is definedHebbar
Add ifdef to bdinfo command to display ethernet information only if CONFIG_CMD_NET is defined for arm modules. Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
2008-02-04ARM: add I2C init function call in lib_arm/board.cHebbar
Adds I2C init func call to init sequence for ARM boards. This is present in ppc,blackfin and other processor init sequence. Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
2008-02-04ppc4xx: Fix ndfc HW ECC byte orderStefan Roese
The current ndfc HW ECC implementation swaps the first two ECC bytes. But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering, so this swapping in the HW ECC driver is bogus. This patch fixes this problem and now really uses the SMC ECC byte order. Thanks to Sean MacLennan for pointing this out. Signed-off-by: Stefan Roese <sr@denx.de>
2008-02-04ppc4xx: Fix GPIO configuration for pcs440epStefan Roese
The SRD0_PFC0 register was not configured correctly to enable the GPIO's 49-63 for GPIO. They have been configured as trace signals. This patch fixes this by clearing the corresponding bit. Signed-off-by: Stefan Roese <sr@denx.de>
2008-02-04ppc4xx: Fix problem with init-ram bigger than 4k on 440 platformsStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2008-02-04ARM: Board voiceblue updateLadislav Michl
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2008-02-04ARM: AT91RM9200 based boards config cleanupLadislav Michl
Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix indentation.
2008-02-04ARM: Fix at91rm9200dk base addressLadislav Michl
Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT. However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact. I'm sending this patch 4th (!) time in hope it produces at least some reaction. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Fix at91rm9200dk base and environment address.
2008-02-03MMC for PXA 27X (resubmit)stefano babic
MMC support for X_Scale PXA is broken and does not work. Mainly, the mmc_init() function cannot recognize current SD/MMC cards. There were already some patches around the world but none of them was merged into the official u-boot tree. This patch makes order fixing this issue. Resubmit after code cleanup. Applied and tested on PXA 270 (TrizepsIV module). Signed-off-by: Stefano Babic <sbabic@denx.de>
2008-02-03Fix gcc issues in pxa-regs.hstefano babic
Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4 issues generates wrong code. (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu). This patch fixes the problem and solves the gcc-4 issues as the linux kernel does. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
2008-01-30Merge branch 'mpc86xx'Jon Loeliger
2008-01-29TQM834x: enable DHCPJens Gehrlein
Signed-off-by: Jens Gehrlein <sew_s@tqs.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-29TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 ↵Jens Gehrlein
Bit). Signed-off-by: Jens Gehrlein <sew_s@tqs.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-29Fix conditional compilation of mpx8xxx_spi driverBen Warren
This driver should only compile if CONFIG_MPC8XXX_SPI is set Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-29API: Provide dummy halt() in the glue layer.Rafal Jaworowski
This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG. Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
2008-01-29API: Convert conditional building to the new scheme.Rafal Jaworowski
This fixes a build breakage with CONFIG_API enabled, which appeared after the recent changes in the U-Boot build system. Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
2008-01-25inka4x0: remove dead codeWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-2486xx: Add reginfo commandBecky Bruce
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-2486xx: Add print_laws function to fsl_law.cBecky Bruce
This can be used for debug, and will be used by board code to help implement reginfo. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-2486xx: Remove old-style law setup codeBecky Bruce
This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-2486xx: Convert sbc8641d to use new law setup code.Becky Bruce
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
generated by cgit (git 2.34.1) at 2025-02-03 09:11:58 +0000