summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-30lx2160a : Add emmc in boot_targets environment variableMeenakshi Aggarwal
Add emmc in supported boot_targets and Add bootcmd environment variable for emmc boot. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30arm64: ls1046a: remove fdt_high environment variableYuantian Tang
Setting fdt_high and initrd_high to 0xffffffffffffffff leads to various difficulty to resolve bugs. Remove them and use bootm_size instead to safely contain a kernel, device tree and initrd for relocation. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30arm64: ls1028a: remove fdt_high environment variableYuantian Tang
Setting fdt_high and initrd_high to 0xffffffffffffffff leads to various difficulty to resolve bugs. Remove them and use bootm_size instead to safely contain a kernel, device tree and initrd for relocation. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30board: fsl: lx2160a: Add GIC LPI memory reserve fixupWasim Khan
Reserve DDR memory region used for GIC LPI configuration table. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: lx2160a: Enable GIC_V3_ITS configWasim Khan
Enable GIC_V3_ITS config to program GIC LPI configuration table. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30board: fsl: lx2160a: Program GIC LPI configuration tableWasim Khan
Program GIC LPI configuration table: 1. Redistributor PROCBASER configuration table (which is common for all redistributors) 2. Redistributor pending table (PENDBASER), for all the available redistributors. Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30board: lx2160a: Correct board fixup for PCIe nodesVikas Singh
Update "board_fix_fdt" with correct counter value "i". This will fix the issue while fetching the "reg_names" resource from fdt after fixup. Signed-off-by: Vikas Singh <vikas.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30ls1021a: Set CONFIG_SYS_BOOTMAPSZ to the memory for relocationAlison Wang
This patch sets CONFIG_SYS_BOOTMAPSZ to the amount of memory available to safely contain a kernel, device tree and initrd for relocation. The way to set fdt_high as 0xffffffff to disable device tree relocation is removed. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-27Merge branch '2020-03-27-master-imports'Tom Rini
- Update a few MAINTAINERS entries - cache alignment fix in ext4 code - Two small test fixes
2020-03-27test: typo decompressionHeinrich Schuchardt
%s/decopmression/decompression/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-27MAINTAINERS: add myself as maintainer of fs/btrfsMarek Behún
Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-03-27fs: ext4: Fix alignment of cache buffersJan Kiszka
We need to align the cache buffer to ARCH_DMA_MINALIGN in order to avoid access errors like CACHE: Misaligned operation at range [be0231e0, be0235e0] seen on the MCIMX7SABRE. Fixes: d5aee659f217 ("fs: ext4: cache extent data") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-03-27MAINTAINERS: Add usb.h entry to usbMarek Vasut
Add usb.h file into the USB list. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2020-03-27test/py: mmc: Fix 'mmc info' testcaseHarald Seiler
Commit 41e30dcf8796 ("cmd: mmc: Make Mode: printout consistent") fixed the layout of `mmc info` output. Reflect this change in the respective testcase. Also fix a typo in the documentation. Fixes: 41e30dcf8796 ("cmd: mmc: Make Mode: printout consistent") Signed-off-by: Harald Seiler <hws@denx.de> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-27Revert "vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader."Tom Rini
Currently this causes failures of the platform when running the EFI loader tests, so disable it for now. This reverts commit af827140e5965e5bb2bcad1c53ca8419b428ff6d. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-26Merge tag 'u-boot-rockchip-20200327' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fixed for rv1108 and elgin-rv1108 board - Fix the keyboard from USB instead of CrOS EC
2020-03-26rockchip: mkimage: Use an existing macro instead of a decimal valueMiquel Raynal
Depending on the SoC, a header of four characters is prepended to the image. There is already a macro defining the number of characters: RK_SPL_HDR_SIZE, so use it instead of hardcoding "4". Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26rv1108: Fix boot regressionOtavio Salvador
Since commit 79030a486128 ("rockchip: Add Single boot image (with binman, pad_cat)") the following boot regression is seen: U-Boot 2020.04-rc3-00050-gd16e18ca6c-dirty (Mar 09 2020 - 11:40:07 -0300) Model: Elgin RV1108 R1 board DRAM: 128 MiB initcall sequence 67fd12a0 failed at call 6000b927 (err=-22) This happens because the above commit missed to include the "rockchip-u-boot.dtsi" for rv1108, so include this file like it done for other Rockchip SoC dtsi's. Fixes: 79030a486128 ("rockchip: Add Single boot image (with binman, pad_cat)") Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26elgin-rv1108: Avoid adc_channel_single_shot errorOtavio Salvador
Currently the following error message is seen during boot: U-Boot 2020.01-08751-g55759ae141 (Mar 09 2020 - 14:44:52 -0300) Model: Elgin RV1108 R1 board DRAM: 128 MiB APLL: 600000000 DPLL:1200000000 GPLL:1188000000 ACLK_BUS: 148500000 ACLK_PERI:148500000 HCLK_PERI:148500000 PCLK_PERI:74250000 MMC: dwmmc@30110000: 0 Loading Environment from MMC... OK In: serial@10210000 Out: serial@10210000 Err: serial@10210000 Model: Elgin RV1108 R1 board rockchip_dnl_key_pressed: adc_channel_single_shot fail! .... Since the elgin-rv1108 does not use ADC to read the download key status, select CONFIG_ROCKCHIP_BOOT_MODE_REG=0 to avoid such error. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26elgin-rv1108: Use rk_board_late_init() for GPIO settingsOtavio Salvador
Since commit 8e9a8d0d0c8c ("rockchip: elgin-rv1108: use board_early_init_f for per-boar init") the function that configure the board GPIOs is no longer called since CONFIG_BOARD_EARLY_INIT_F=y is not selected. These GPIOs do not need to be configured in such early stagem, so change it to rk_board_late_init() and also select CONFIG_BOARD_LATE_INIT=y to fix the regression. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1Otavio Salvador
In order to make the console pins more robust to noise, activate the pullups and increase its drive strength. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26rockchip: Change keyboard input from CrOS EC keyboard to a USB keyboardPeter Robinson
These boards aren't ChromeOS devices so won't have a cros-ec-keyb input as it's the keyboard available via the ChromeOS Embedded Controller. Update them to use a USB keyboard which would actually be available. Also enable the usb keyboard option for those devices that don't have it enabled already. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26rockchip: evb-rv1108: Use syscon API to get grf baseKever Yang
Use syscon API to get grf base instead of get from dts. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-26rockchip: elgin-rv1108: Use syscon API to get grf baseKever Yang
Use syscon API to get grf base instead of get from dts. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2020-03-23vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.Kristian Amlie
EFI was disabled in f95b8a4b5f64f because of the missing DTB file, and indeed, the DTB file is required to load recent versions of GRUB (2.04) correctly. Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2020-03-23Merge tag 'efi-2020-04-rc4-5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc4 (5) This series contains bug fixes for the UEFI sub-system: * report correct variable length in GetNextVariable() * correct copying direction if freestanding memmove() * remove const for parameter of GetNextVariableName() * correct function descriptions Unit tests are added and adjusted.
2020-03-22efi_loader: definition of GetNextVariableName()Heinrich Schuchardt
'vendor' is both an input and an output parameter. So it cannot be constant. Fixes: 0bda81bfdc5c ("efi_loader: use const efi_guid_t * for variable services") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_selftest: test CalculateCrc32, CopyMem, SetMemHeinrich Schuchardt
Provide unit tests for CalculateCrc32(), CopyMem(), SetMem(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_loader: fix freestanding memmove()Heinrich Schuchardt
For EFI binaries we have to provide an implementation of memmove() in efi_freestanding.c. Before this patch the memmove() function was copying in the wrong direction. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_loader: description efi_convert_pointer()Heinrich Schuchardt
Correct the description of function efi_convert_pointer(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_loader: simplify logical expression in efi_disk_add_dev()Heinrich Schuchardt
To check if a variable is non-zero there is no need for '!= 0'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_selftest: check length reported by GetNextVariableName()Heinrich Schuchardt
GetNextVariableName should report the length of the variable including the final 0x0000 in bytes. Check this in the unit test. Increase the buffer size for variable names. 40 bytes is too short. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_loader: correct reported length in GetNextVariable()Heinrich Schuchardt
The runtime service GetNextVariable() returns the length of the next variable including the closing 0x0000. This length should be in bytes. Comparing the output of EDK2 and U-Boot shows that this is currently not correctly implemented: EDK2: OsIndicationsSupported: 46 PlatformLang: 26 PlatformLangCodes: 36 U-Boot: OsIndicationsSupported: 23 PlatformLang: 13 PlatformLangCodes: 18 Provide correct length in GetNextVariable(). Fixes: d99a87f84b75 ("efi_loader: implement GetNextVariableName()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_loader: fix function descriptions in efi_disk.cHeinrich Schuchardt
Use Sphinx style for function descriptions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_loader: description of efi_variable.cHeinrich Schuchardt
Correct the file description. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-18Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Revert "sunxi: psci: avoid error address-of-packed-member"
2020-03-18Merge tag 'efi-2020-04-rc4-4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc4 (4) This series fixes several bugs: * consider the /reserved-memory node in the device tree * consider memory reservations created in ft_board_setup() * correct output of 'efidebug memmap' on the sandbox * correct the definition of efi_capsule_header() Furthermore some definitions needed for future patches are added to header files.
2020-03-18Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Fix sbi_remote_sfence_vma{,_asid}. - Avoid calling sbi_clear_ipi(). - Add new SBI v0.2 extensions support.
2020-03-18Revert "sunxi: psci: avoid error address-of-packed-member"Tomasz Duszynski
Using memcpy() for some MMIO access is generally frowned upon and might break things on some platforms. Allwinner H3, which fails to boot, being an example here. Moreover, fields being accessed are naturally aligned and warnings produced by GCC have been quiesced for some time already by: 53dc8ae ("gcc-9: silence 'address-of-packed-member' warning") That said, it should be okay to revert this commit. This reverts commit 9bd34a69a453d409792e08c00953ce8862145e65. Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-17efi_loader: correct a definition of struct efi_capsule_headerAKASHI Takahiro
See UEFI specification, section 8.5.3. In addition, the structure, efi_capsule_header, should be "packed" as it is a serialized binary format in a capsule file. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-03-17efi_loader: export a couple of protocol related functionsAKASHI Takahiro
This is a preparatory patch. Those functions will be used in an implementation of UEFI firmware management protocol as part of my capsule update patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-03-17efi_loader: define System Resource Table macrosAKASHI Takahiro
Some of those values will be used in an implementation of UEFI firmware management protocol as part of my capsule update patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-03-17efi_loader: define OsIndicationsSupported flagsAKASHI Takahiro
These flags are expected to be set in OsIndicationsSupported variable if corresponding features are supported. See UEFI specification, section 8.5.4. In particular, capsule-related flags will be used in my capsule update patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Fix misspelled EFI_OS_INDICATIONS_BOOT_TO_FW_UI. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-17cmd: bootefi: Parse reserved-memory node from DTAtish Patra
Currently, bootefi only parses memory reservation block to setup EFI reserved memory mappings. However, it doesn't parse the reserved-memory[1] device tree node that also can contain the reserved memory regions. Add capability to parse reserved-memory node and update the EFI memory mappings accordingly. 1. <U-Boot source>/doc/device-tree-bindings/reserved-memory/reserved-memory.txt] Signed-off-by: Atish Patra <atish.patra@wdc.com> Fix an endless loop. The /reserved-memory node may have children without reg property. Remove a superfluous debug statement. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-17cmd: map addresses to sysmem in efidebug memmapHeinrich Schuchardt
Addresses in the sandbox's device tree are in the sandbox's virtual address space. If we want to compare memory reservations in the device-tree with the output of 'efidebug memmap', we need to convert back to this address space. Adjust the output of the 'efidebug memmap' command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-17efi_loader: create reservations after ft_board_setupHeinrich Schuchardt
Some memory reservations are made in ft_board_setup(). Ensure that we create reserved memory map entries after ft_board_setup(). The downside of this patch is that if bootefi is called multiple times with an devicetree argument superfluous reservations for the old copies of the device tree will exist. But that is still better than missing a reservation. Deleting the superfluous reservations is not possible because reservations in the memory map are rounded to page size and may be coallesced. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-17riscv: Implement new SBI v0.2 extensionsBin Meng
Few v0.1 SBI calls are being replaced by new SBI calls that follows v0.2 calling convention. Implement the replacement extensions and few additional new SBI function calls that makes way for a better SBI interface in future. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17riscv: Introduce a new config for SBI v0.1Bin Meng
We now have SBI v0.2 which is more scalable and extendable to handle future needs for RISC-V supervisor interfaces. Introduce a new config and move all SBI v0.1 code under that config. This allows to implement the new replacement SBI extensions cleanly and remove v0.1 extensions easily in future. Currently, the config is enabled by default. Once all M-mode software, with v0.1, is no longer in use, this config option and all relevant code can be easily removed. This commit is inspired from Linux kernel patch: https://patchwork.kernel.org/patch/11407361/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17riscv: Add SBI v0.2 extension definitionsBin Meng
Few v0.1 SBI calls are being replaced by new SBI calls that follows v0.2 calling convention. This patch just defines these new extensions. This commit is inspired from Linux kernel patch: https://patchwork.kernel.org/patch/11407359/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17riscv: Add basic support for SBI v0.2Bin Meng
The SBI v0.2 introduces a base extension which is backward compatible with v0.1. Implement all helper functions and minimum required SBI calls from v0.2 for now. All other base extension function will be added later as per need. As v0.2 calling convention is backward compatible with v0.1, remove the v0.1 helper functions and just use v0.2 calling convention. Add a new Kconfig options CONFIG_SBI for the new SBI v0.2 codes, and let CONFIG_SBI_IPI depend on it. This commit is inspired from Linux kernel patch: https://patchwork.kernel.org/patch/11407363/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>