summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-04ARM: AM43xx: Write sdram_config to secure_emif_sdram_configDave Gerlach
The register secure_emif_sdram_config in control module is copied to the EMIF sdram_config register when it is coming out of DeepSleep0 in order to ensure that the EMIF comes up for the correct type of DDR. Without this, resume can hang from within the kernel. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2014-03-04ARM: AM43xx: EMIF: configure self-refresh entry delayDave Gerlach
Per a suggestion from the hardware team, program the emif_pwr_mgmt_ctrl and emif_pwr_mgmt_ctrl_shdw registers within the EMIF to hold the desired delay in cycles that the EMIF waits without an access to enter self-refresh, in this case 8192 cycles. With this, code desiring to enter self refresh only has to toggle one bit to enable it. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2014-03-04ARM: AM43xx: Add Ethernet boot support to SPLMugunthan V N
Add Ethernet Boot support to SPL Acked-by: Tom Rini <trini@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2014-03-04ARM: AM4372: Update EMIF registers for DDR3Lokesh Vutla
Updating EMIF_PHY_CTRL and adding EMIF_READ_WRITE_EXECUTION_THRESHOLD registers. In EMIF_PHY_CTRL: Updating [4:0]READ_LATENCY to 8, because at higher frequencies like 400MHz the read latency expected will be CL+3 as per tests from HW folks. Clearing [19]PHY_DIS_CALIB_RST bit as this is used onl for debug purpose. With out this resume is not working(Still waiting for PHY team to come back for better explanation). Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2014-03-04ARM: DRA7xx: add support for reading cpsw 2nd mac from efuseMugunthan V N
Adding support for reading cpsw 2nd mac address from efuse and pass it to kernel via dtb which will be used in dual emac mode of cpsw. Also correct the bit masking of mac id read from the efuse. Acked-by: Tom Rini <trini@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2014-03-04ARM: AM335x: add support for reading cpsw 2nd mac address from efuseMugunthan V N
Adding support for reading cpsw 2nd mac address from efuse and pass it to kernel via dtb which will be used in dual emac mode of cpsw. Also adding mii command support to am335x common config. Acked-by: Tom Rini <trini@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2014-03-04ARM: AM43xx: Add CPSW support to AM43xx EPOS and GP EVMMugunthan V N
Adding support for CPSW to AM43xx EPOS nad GP EVM which is connected to RMII and RGMII phy respectively and enable cpsw in config. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2014-03-04ARM: AM43xx: clocks: Enable CPGMAC clock controlMugunthan V N
Enable CPGMAC clock control for AM43xx to use ethernet in U-Boot Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2014-03-04drivers: net: cpsw: add support to have phy address from cpsw platform dataMugunthan V N
Some platforms like AM437x have different EVMs with different phy addresses, so this patch adds support for passing phy address via cpsw plaform data. Also renamed phy_id to phy_addr so better understanding of the code. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> [trini: Update BuR am335x_igep0033 pcm051_rev3 pcm051_rev1 cm_t335 pengwyn boards] Signed-off-by: Tom Rini <trini@ti.com>
2014-03-04nand_spl: display warning message to inform the end of nand_splMasahiro Yamada
Now we have two different frameworks for doing the same thing. I'd like to propose to drop nand_spl framework. How about deleting it before v2014.07 release? In the interim, this commit will display a warning message when compiling nand_spl board. Now we have 19 nand_spl boards: MPC8315ERDB_NAND SIMPC8313_LP SIMPC8313_SP MPC8536DS_NAND MPC8569MDS_NAND MPC8572DS_NAND P1023RDS_NAND P1011RDB_NAND P1020RDB_NAND P2010RDB_NAND P2020RDB_NAND acadia_nand bamboo_nand canyonlands_nand glacier_nand haleakala_nand kilauea_nand rainier_nand sequoia_nand They must be ported to SPL before the deadline, otherwise they will be removed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Dave Liu <daveliu@freescale.com> Cc: Ron Madrid <info@sheldoninst.com> Cc: Roy Zang <tie-fei.zang@freescale.com> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
2014-03-04m68k: merge compile flags -ffixed-d7 -sep-dataMasahiro Yamada
All arch/m68k/cpu/*/config.mk define the same flags PLAGFORM_REFLFLAGS += -ffixed-d7 -msep-data Move it to arch/m68k/config.mk Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Jason Jin <Jason.jin@freescale.com>
2014-03-04sh: merge compiler flag -ffixed-r13Masahiro Yamada
-ffixed-r13 is defined commonly for sh2, sh3, sh4. Move it to arch/sh/config.mk Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2014-03-04sh: Do not define -ffreestanding twiceMasahiro Yamada
-ffreestanding is defined at the top Makefile for all architectures. Do not define it twice for SH2A. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2014-03-04x86: Delete redundant compiler flagsMasahiro Yamada
-Wstrict-prototypes, -ffreestanding, -fno-stack-protector are defined at the top Makefile for all architectures. Do not define them twice for x86. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2014-03-04nand_spl: simpc8313: move config.mk used only for nand_splMasahiro Yamada
board/sheldon/simpc8313/config.mk is used only for nand_spl. So it should go into nand_spl/board/sheldon/simpc8313/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-04Makefile: delete unused variable LDSCRIPT_MAKEFILE_DIRMasahiro Yamada
LDSCRIPT_MAKEFILE_DIR is not referenced from anywhere. Remove. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-04config.mk: Delete unused variable BCURDIRMasahiro Yamada
This variable was abolished by Kbuild series. I forgot to delete it. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-04kbuild: post: fix dependency tracking correctlyMasahiro Yamada
$(call if_changed,...) must take FORCE as a prerequite. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-03-04serial: zynq: Add OF initialization supportMichal Simek
Add console selection from DTB which is enough to have OF driven solution. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-04zynq: Add OF ram initialization supportMichal Simek
Read ram size directly from DTB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-04mmc: zynq: Add OF initialization supportMichal Simek
Enable initialize sdhci from DTB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-04net: gem: Add OF initialization supportMichal Simek
Gem can be directly initialized from DTB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-04zynq: Do not use SPL OF initializationMichal Simek
Disable CONFIG_OF_CONTROL for SPL compilation. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-04net: emaclite: Fix OF initializationMichal Simek
- Add xilinx_emaclite_of_init to netdev.h - Remove global data pointer from the driver - Add better handling for error state. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-03board/ti/am335x/README: update for NAND bootpekon gupta
NAND boot mode on AM335x EVM has been verified, and steps to use it has been documented and update in this README Signed-off-by: Pekon Gupta <pekon@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Tom Rini <trini@ti.com>
2014-03-03mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemespekon gupta
chip->ecc.correct() is used for detecting and correcting bit-flips during read operations. In omap-nand driver it implemented as: (a) omap_correct_data(): for h/w based ECC_HAM1 scheme (b) omap_correct_data_bch() + CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW_DETECTION_SW for ECC_BCH8 scheme using GPMC and software lib/bch.c (c) omap_correct_data_bch() + CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW for ECC_BCH8 scheme using GPMC and ELM This patch updates (c) - checks for calc_ecc[]==0x00 so that error_correction is not required for known good pages. - adds scalability for other ECC_BCHx scheme by merging following omap_rotate_ecc_bch() + omap_fix_errors_bch() => omap_correct_data_bch() - fixing logic for bit-flip correction based on error_loc[count] Signed-off-by: Pekon Gupta <pekon@ti.com>
2014-03-03mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemespekon gupta
chip->ecc.calculate() is used for calculating and fetching of ECC syndrome by processing the data passed during Read/Write accesses. All H/W based ECC schemes use GPMC controller to calculate ECC syndrome. But each BCHx_ECC scheme has its own implemetation of post-processing and fetching ECC syndrome from GPMC controller. This patch updates OMAP_ECC_BCH8_CODE_HW ECC scheme in following way: - merges multiple chip->calculate API for different ECC schemes omap_calculate_ecc() + omap_calculate_ecc_bch() + omap_calculate_ecc_bch_sw() ==> omap_calculate_ecc() - removes omap_ecc_disable() and instead uses it as inline. Signed-off-by: Pekon Gupta <pekon@ti.com>
2014-03-03mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemespekon gupta
chip->ecc.hwctl() is used for preparing the H/W controller before read/write NAND accesses (like assigning data-buf, enabling ECC scheme configs, etc.) Though all ECC schemes in OMAP NAND driver use GPMC controller for generating ECC syndrome (for both Read/Write accesses). But but in current code HAM1_ECC and BCHx_ECC schemes implement individual function to achieve this. This patch (1) removes omap_hwecc_init() and omap_hwecc_init_bch() as chip->ecc.hwctl will re-initializeGPMC before every read/write call. omap_hwecc_init_bch() -> omap_enable_ecc_bch() (2) merges the GPMC configuration code for all ECC schemes into single omap_enable_hwecc(), thus adding scalability for future ECC schemes. omap_enable_hwecc() + omap_enable_ecc_bch() -> omap_enable_hwecc() Signed-off-by: Pekon Gupta <pekon@ti.com>
2014-02-26Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
Conflicts: arch/arm/cpu/armv7/config.mk board/ti/am43xx/mux.c include/configs/am43xx_evm.h Signed-off-by: Tom Rini <trini@ti.com>
2014-02-26arm: Switch to -mno-unaligned-access when supported by the compilerTom Rini
When we tell the compiler to optimize for ARMv7 (and ARMv6 for that matter) it assumes a default of SCTRL.A being cleared and unaligned accesses being allowed and fast at the hardware level. We set this bit and must pass along -mno-unaligned-access so that the compiler will still breakdown accesses and not trigger a data abort. To better help understand the requirements of the project with respect to unaligned memory access, the Documentation/unaligned-memory-access.txt file has been added as doc/README.unaligned-memory-access.txt and is taken from the v3.14-rc1 tag of the kernel. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Mans Rullgard <mans@mansr.com> Signed-off-by: Tom Rini <trini@ti.com>
2014-02-26checkpatch.pl: Add warning for new __packed additionsTom Rini
While there are valid reasons to use __packed, often the answer is that you should be doing something else here instead. Signed-off-by: Tom Rini <trini@ti.com>
2014-02-26arm: remove unneeded symbol offsets and _TEXT_BASEAlbert ARIBAUD
Remove the last uses of symbol offsets in ARM U-Boot. Remove some needless uses of _TEXT_BASE. Remove all _TEXT_BASE definitions. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2014-02-26arm: make _end compiler-generatedAlbert ARIBAUD
This prevents references to _end from generating absolute relocation records. This change is binary invariant for ARM targets. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2014-02-26cm_t335: fix linker file to produce full ELFAlbert ARIBAUD
Newly added cm_t335 was missed in commit 47ed5dd0 which made ARM targets produce full ELF files. Fix its linker script. This change is binary-invariant when only .dynsym, .dynstr, .dynamic, .plt, .interp and .gun sections are declared. Sections .hash, .got.plt, .dynbss and .ARM.exidx are also declared so that their (unused) content is moved out of the u-boot binary. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2014-02-26Revert "ext4fs: Add ext4 extent cache for read operations"Tom Rini
This reverts commit fc0fc50f38a4d7d0554558076a79dfe8b0d78cd5. The author has asked on the mailing list that we revert this for now as it breaks write support. Reported-by: Łukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@ti.com>
2014-02-25Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
With this, fixup a trivial build error of get_effective_memsize needing to be updated in the new board/freescale/p1010rdb/spl.c Signed-off-by: Tom Rini <trini@ti.com>
2014-02-25arm: omap: delete unincluded omap-common/config.mkMasahiro Yamada
arch/arm/cpu/armv7/omap-common/config.mk is never included because "omap-common" is not SoC name. If we want to add OMAP-specific compiler flags, they must be added to omap3/config.mk, omap4/config.mk, omap5/config.mk. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
2014-02-25kbuild: Move linker sciript check to prepare1Masahiro Yamada
Same as the previous commit. Move sanity check to prepare1 target to avoid nasty troubles. Before this commit, LDSCRIPT existence was not checked when it was specified by CONFIG_SYS_LDSCRIPT. Now LDSCRIPT existence is checked for all boards. $(wildcard $(LDSCRIPT)) must point to the linker scripts with absolute path. Otherwise, make will terminate with a false error on out-of-tree build. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: Fix a false error of generic board supportMasahiro Yamada
Before this commit, make terminated with an error where is shouldn't under some condition. This bug happened when we built a board unsupporting generic board right after building with generic board. For example, the following sequence failed. (harmony uses generic board but microblaze-generic does not support it) $ make harmony_config Configuring for harmony board... $ make CROSS_COMPILE=arm-linux-gnueabi- [ Build succeed ] $ make microblaze-generic_config Configuring for microblaze-generic board... $ make CROSS_COMPILE=microblaze-linux- Makefile:488: *** Your architecture does not support generic board. Please undefined CONFIG_SYS_GENERIC_BOARD in your board config file. Stop. We had to do "make clean" before building the microblaze board. This commit fixes this unconvenience. Move generic board sanity check to "prepare1" target, which is run after generation of include/autoconf.mk. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: get back DTB at the top directoryMasahiro Yamada
Commit 6ab6b2af deleted ./u-boot.dtb because it was a copy of dts/dt.dtb. But Simon suggested to keep u-boot.dtb at the top directory because it is a build output. After discussions, we agreed on revival of ./u-boot.dtb. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-02-25kbuild: add misc targets, help, ubootrelease, ubootversionMasahiro Yamada
"help" target has been copied from Linux 3.13 and adjusted for U-Boot. Unlike Linux, cleaning is done on 4 levels: clean, clobber, mrproper, distclean. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: support building signle targetsMasahiro Yamada
Import build rules of single targets from Linux 3.13. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: refactor more IMX image rulesMasahiro Yamada
This commit avoids generating ./SPL twice. - Fist time descending to spl/ - Second time as a prerequisite of u-boot-with-spl.imx, u-boot-with-nand-spl.imx. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: use shorten logs for IMX imagesMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: use shorten logs for misc targetsMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: use shorten log for linking u-bootMasahiro Yamada
Move sandbox-specific link rule to arch/sandbox/config.mk. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: use shorten logs for combined rules of mkimage, padding and catMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: use shorten logs for cat rulesMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: use shorten logs for mkimage rulesMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25kbuild: use shorten logs objcopy rulesMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
generated by cgit (git 2.34.1) at 2025-01-17 03:04:37 +0000