summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-30arm: arch-mx6: typo fixes in crm_regs.hSoeren Moch
fix typos in video pll related register names and bit defines Signed-off-by: Soeren Moch <smoch@web.de>
2014-10-30odroid: adjust gpio calls to dm gpio apiPrzemyslaw Marczak
Setting gpio value before dm gpio init has no effect, so now, odroid gpio settings are moved after the gpio uclass init. Using non-requested gpio pin cases printing error messages. To avoid this, gpio_request() is added for those gpios. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-30exynos4/4x12: gpio: use gpio extra base addressesPrzemyslaw Marczak
This patch adds extra gpio part addresses to exynos4 and exynos4x12_gpio_data arrays, which are required since the gpio enum lists are linear Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-30exynos4/4x12: cpu: add extra gpio base addressesPrzemyslaw Marczak
After remove the offsets in Exynos4/4x12 gpio enums, an additional gpio base addresses are required. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-30mtd: nand: mxs: Add ECC geometry for 2048b/112b NANDMarek Vasut
Add ECC geometry for NAND which has 2048b pagesize and 112b OOB size. This is for example Macronix MX30LF2G28AB chip. Signed-off-by: Marek Vasut <marex@denx.de>
2014-10-30arm: imx6: fix typos in CCM_ANALOG_PLL_VIDEO_DENOM register nameAnatolij Gustschin
Fix name for Video PLL denominator register. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-10-30novena: Fix ethernet PHY reset sequenceNikolay Dimitrov
This patch fixes conflict between PHY pins becoming outputs after reset and imx6 still driving the pins. It also fixes the reset timing as recommended by the PHY datasheet. Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg> Cc: Stefano Babic <sbabic@denx.de> Cc: Sean Cross <xobs@kosagi.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-10-30ot1200: rework card detect for eMMCChristian Gmeiner
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2014-10-30ot1200: add support for usdhc4Christian Gmeiner
On the 'mr' variant switching to 'mmc dev 1' will result in "MMC: no card present". Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2014-10-30ot1200: add feature padsChristian Gmeiner
The older 'mr' variant and the generic variant of the OT1200 differ in some places. As the name suggests the generic variant supports more boot devices. In order to be compatible with the 'mr' variant we define some 'feature' GPIOs. On the 'mr' variant this pads are not connected so we define their state with the help of the internal pullups. On the generic variant this GPIOs are connected and represent the state of the hardware. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2014-10-30tqma6: fix typo in header guard defineMarkus Niebel
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2014-10-30tqma6: fix sf detectionMarkus Niebel
Commit 155fa9af95ac5be857a7327e7a968a296e60d4c8 changed the way to define a GPIO line, which can be used to force CS high across multiple transactions. In order to fix sf detection change board code to make use of board_spi_cs_gpio(..). Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2014-10-30mx6sabresd: Add Seiko WVGA panel supportFabio Estevam
Add support for the 4.3'' Seiko WVGA parallel display. In order to direct the splash screen to the Seiko display: => setenv panel SEIKO-WVGA => save => reset Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2014-10-30ARM: mx6: Add support for Kosagi NovenaMarek Vasut
Add support for the Kosagi Novena board. Currently supported are: - I2C busses - FEC Ethernet - MMC0, MMC1, Booting from MMC - SATA - USB ports - USB Ethernet Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Sean Cross <xobs@kosagi.com> Cc: Nikolay Dimitrov <picmaster@mail.bg> Reviewed-by: Nikolay Dimitrov <picmaster@mail.bg>
2014-10-30board: wandboard: add usb storageJeroen Hofstee
Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-10-29Merge git://git.denx.de/u-boot-x86Tom Rini
2014-10-29Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxTom Rini
2014-10-29x86: config: Increase CONFIG_SYS_BOOTM_LEN to 16MBSimon Glass
The code density of x86_64 is not wonderful. Increase the maximum boot size and adjust the load address to cope. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-29powerpc: TQM5200: convert to generic boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2014-10-29powerpc: tqm8xx*: convert to generic boardWolfgang Denk
This converts all TQM8xx boards (MPC8xx based) to generic board. Signed-off-by: Wolfgang Denk <wd@denx.de>
2014-10-29serial: UniPhier: add static to locally used functionsMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-29serial: UniPhier: add .pending handlerMasahiro Yamada
Without .pending handler, tstc() function always returns 1. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-29ARM: UniPhier: make pinmon command optionalMasahiro Yamada
Add CONFIG_CMD_PINMON to UniPhier-specific Kconfig and make the "pinmon" command user-configurable. This command can be disabled via the configuration if users do not need it. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-29arm: interrupt_init: set sp in IRQ/FIQ modesGeorges Savoundararadj
Before this commit, the stack addresses for IRQ and FIQ modes, IRQ_STACK_START and FIQ_STACK_START, were computed in interrupt_init but they were not used. This commit sets the stack pointers for IRQ and FIQ modes. Signed-off-by: Georges Savoundararadj <savoundg@gmail.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2014-10-29arm: relocate the exception vectorsGeorges Savoundararadj
This commit relocates the exception vectors. As ARM1176 and ARMv7 have the security extensions, it uses VBAR. For the other ARM processors, it copies the relocated exception vectors to the correct address: 0x00000000 or 0xFFFF0000. Signed-off-by: Georges Savoundararadj <savoundg@gmail.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Warren <twarren@nvidia.com>
2014-10-29arm: make .vectors section allocatableGeorges Savoundararadj
A regression was introduced in commit 41623c91. The consequence of that is the non-relocation of the section .vectors symbols : _undefined_instruction, _software_interrupt, _prefetch_abort, _data_abort, _not_used, _irq and _fiq. Before commit 41623c91, the exception vectors were in a .text section. The .text section has the attributes allocatable and executable [1]. In commit 41623c91, a specific section is created, called .vectors, with the attribute executable only. What have changed between commit 41623c91^ and 41623c91 is the attribute of the section which contains the exception vectors. An allocatable section is "a section [that] occupies memory during process execution" [1] which is the case of the section .vectors. Adding the lacking attribute (SHF_ALLOC or "a") for the definition of the section .vectors fixed the issue. To summarize, the fix has to mark .vectors as allocatable because the exception vectors reside in "memory during execution" and they need to be relocated. [1] http://man7.org/linux/man-pages/man5/elf.5.html Signed-off-by: Georges Savoundararadj <savoundg@gmail.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2014-10-29kconfig: arm: introduce symbol for ARM CPUsGeorges Savoundararadj
This commit introduces a Kconfig symbol for each ARM CPU: CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136, CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100. Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected for CPU_ARM1176 and CPU_V7. For each target, the corresponding CPU is selected and the definition of SYS_CPU in the corresponding Kconfig file is removed. Also, it removes redundant "string" type in some Kconfig files. Signed-off-by: Georges Savoundararadj <savoundg@gmail.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-29i2c: designware: Convert driver to multibus/multiadapter frameworkStefan Roese
In preparation for the SoCFPGA support of the designware I2C driver, convert this driver to the common CONFIG_SYS_I2C framework. This patch converts all users of this driver, this is: - ST spearxxx boards - AXS101 (ARC700 platform) I couldn't test this patch on those boards. Only compile tested for all spear boards. And tested on SoCFPGA. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Heiko Schocher <hs@denx.de> Cc: Vipin Kumar <vk.vipin@gmail.com> Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-29i2c: mxs: Add support for I2C 1 on i.MX28Marek Vasut
Add support for I2C bus 1 on the i.MX28. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-10-29i2c: mxs: Pass the i2c_adapter aroundMarek Vasut
This patch permeates the struct i2c_adapter throughout the driver, so that it can be used to determine which adapter should be used. Note that the driver still supports only one adapter. Note that the patch does shuffle mxs_i2c_set_bus_speed() to the top of the driver, but the function remains unchanged. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-10-29i2c: mxs: Add basic support for i2c frameworkMarek Vasut
This patch just converts the function prototypes used throughout this driver to match those of the i2c framework. There is so far no functional change. This patch does not do the deeper integration of the framework bits. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-10-29i2c: mxs: Consolidate hard-coded bus addressMarek Vasut
This patch prepares the MXS I2C driver for the conversion to the new I2C driver framework by pulling out the hard-coded I2C0 address from all the places. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-10-28x86: Correct a few progress message nitsSimon Glass
We should use puts() instead of printf() where possible. Also clarify the setup.bin message. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28x86: bootm: Support booting a 64-bit raw kernelSimon Glass
Detect an x86_64 kernel and boot it in 64-bit mode. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28x86: image: Add new image type for x64_64Simon Glass
This is a bit odd in that we are permitted to boot images for either, even though they are separate architectures. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28x86: Move kernel boot function to arch/x86/lib/bootm.cSimon Glass
The boot_zimage() function is badly named it can also boot a raw kernel. Rename it, and try to avoid pointers for memory addresses as it involves lots of casting. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28x86: Add support for starting 64-bit kernelSimon Glass
Add code to jump to a 64-bit Linux kernel. We need to set up a flat page table structure, a new GDT and then go through a few hoops in the right order. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28x86: Display basic CPU information on bootSimon Glass
Display the type of CPU (x86 or x86_64) when starting up. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28x86: Bring in msr-index.h from linux 3.8Simon Glass
Update this file to include x86_64 fields. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28x86: Move paging functions into cpu.cSimon Glass
These functions really don't belong in physmem as they relate to the cpu. Move them. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28ppc/arm: zap EMK boardsWolfgang Denk
The following bard configurations have been without active maintenance for a long time, and the board maintainer agrees to have them removed: MPC5200: TOP5200, MINI5200, EVAL5200 MPC860: TOP860 at91sam9xeXXX: top9000eval_xe, top9000su_xe Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de> [trini: Add missing Kconfig removals] Signed-off-by: Tom Rini <trini@ti.com>
2014-10-28doc/README.scrapyard: update commit IDsWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2014-10-28dwc_ahsata: use bitwise operator in sata_port_statusNikita Kiryanov
The logic of the return statement in sata_port_status() calls for a bitwise 'AND' operator, not logical 'AND'. Fix the typo. Reported-by: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2014-10-28Merge git://git.denx.de/u-boot-dmTom Rini
2014-10-28e1000: add i211 and unprogrammed i210/i211 supportMarcel Ziswiler
This patch adds support for i211 as well as unprogrammed aka tools only i210/i211 chip support. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2014-10-27odroid: dts: fix name of included dtsiPrzemyslaw Marczak
Odroid is based on Exynos4412. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27odroid: dts: adjust sd cd-gpios for SD CardPrzemyslaw Marczak
There is no gaps in exynos gpio enum after rework, so the gpio numbers should be adjusted to the new numbering. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27trats2: dts: adjust gpio numbers after gpio reworkPrzemyslaw Marczak
There is no gaps in exynos gpio enum after rework, so the gpio numbers should be adjusted to the new numbering. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27trats: dts: adjust gpio numbers to new apiPrzemyslaw Marczak
There is no gaps in exynos gpio enum after rework, so the gpio numbers should be adjusted to the new numbering. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27universal: dts: adjust gpio numbers to new apiPrzemyslaw Marczak
There is no gaps in exynos gpio enum after rework, so the gpio numbers should be adjusted to the new numbering. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-02 16:56:35 +0000