summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-11Fix return value in trailing_strtoln()Simon Glass
This function should return -1 if there is no trailing integer in the string. Instead it returns 0. Fix it by checking for this condition at the start. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Add an accelerated memmove() functionSimon Glass
Bring in a faster memmove() from Linux 4.7. This speeds up scrolling on the display. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11Revert "x86: broadwell: gpio: Remove the codes to set up pin control"Simon Glass
This makes the assumption that setting up pinctrl in cpu_init_r() is safe. On samus we need GPIOs before relocation in order to support power control. This commit fixes the following message on boot: initcall sequence ffe5c6f4 failed at call ffe01d3d (err=-1) ### ERROR ### Please RESET the board ### In any case it seems better to leave init to driver model, so that it can pick up the GPIO driver when it needs it. Since pinctrl is a dependency of the GPIO driver, we may as well put the dependency there and avoid these problems. This reverts commit 9769e05bcf79939bad23a719982dd1f85a110f3c. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Fix Linux v4.7+ zimage booting (update bootparam.h)Stefan Roese
Booting Linux kernel v4.7+ does not work since Linux kernel commit 974f221c "x86/boot: Move compressed kernel to the end of the decompression buffer". This patch adds the latest version of the setup_header struct, adding "init_size" which is needed since this commit referenced above. With this patch, booting Linux v4.8-rc8 does work again on x86 boards. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: baytrail: Add 2nd eMMC controller to the PCI probe listStefan Roese
With this addition, the eMMC device available on the congatec and DFI BayTrail SoM is detected correctly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: conga-qeval20-qa3: Add README to explain the console UART optionsStefan Roese
This patch adds a small README to explain the 2 defconfig files and its usage for the different console UART options. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org>
2016-10-11mmc: Fix cast for 64-bit compilationSimon Glass
Fix a cast that causes warnings on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-10ARM: tegra: reduce DRAM size mapped into MMU on ARM64Stephen Warren
ARM CPUs can architecturally (speculatively) prefetch completely arbitrary normal memory locations, as defined by the current translation tables. The current MMU configuration for 64-bit Tegras maps an extremely large range of addresses as DRAM, well beyond the actual physical maximum DRAM window, even though U-Boot only needs access to the first 2GB of DRAM; the Tegra port of U-Boot deliberately limits itself to 2GB of RAM since some HW modules on at least some 64-bit Tegra SoCs can only access a 32-bit physical address space. This change reduces the amount of RAM mapped via the MMU to disallow the CPU from ever speculatively accessing RAM that U-Boot will definitely not access. This avoids the possibility of the HW raising SError due to accesses to always-invalid physical addresses. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-10colibri_t20: fix usb operation and controller orderMarcel Ziswiler
Without this patch the following error will be shown: Colibri T20 # usb start starting USB... No controllers found This patch fixes USB operation and also the controller order as the CI UDC driver may only be instantiated on the first aka OTG port. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-10colibri_t20: fix display configurationMarcel Ziswiler
Without this patch the following error will be shown: stdio_add_devices: Video device failed (ret=-22) As commit ec5507707a1d1e84056a6c864338f95f6118d3ca (video: tegra: Move to using simple-panel and pwm-backlight) states the Colibri T20 needs updating too which this patch finally attempts doing. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-10regulator: fixed: honour optionality of enable gpioMarcel Ziswiler
According to the binding documentation the fixed regulator enable GPIO is optional. However so far registration thereof failed if no enable GPIO was specified. Fix this by making it entirely optional whether an enable GPIO is used. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-10simple panel: fix spelling of debug messageMarcel Ziswiler
Fix spelling of debug message from cnnot to cannot. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-10tegra: usb gadget: fix ci udc operation if not hostpc capableMarcel Ziswiler
The Tegra 2 aka T20 is not host PC capable. Therefore gate the define CONFIG_CI_UDC_HAS_HOSTPC in tegra-common-usb-gadget.h in case of CONFIG_TEGRA20. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-10sunxi: OLinuXino Lime A20 boards: Use 384 MHz DRAM clockJosh Marshall
We have a number of OlinuXino Lime2 boards (both NAND and eMMC versions) which were experiencing sporadic hangs. After testing with some heavy benchmarking and help from the Armbian forum, it was pinned down as the DRAM settings for the board. The default is 480MHz, but this is unstable, and even the build instructions from the vendor Olimex themselves say to set the DRAM clock to 384. See line 96 at: https://github.com/OLIMEX/OLINUXINO/blob/master/SOFTWARE/A20/A20-build-3.4.103-release-2/BUILD_DESCRIPTION_A20_Olimex_kernel_3.4.103%2B_Jessie_rel_2.txt Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-10sunxi: Fix H3 DRAM impedance calibration on rev. A chipsJens Kuske
H3 seems to have a silicon bug breaking the impedance calibration. This is currently worked around in software by multiple steps combining the results to replace the wrong values. Revision A chips need a different workaround, which is present in the vendor bootloader too, but got overlooked in lack of information and affected boards till now. This commit adds a simplified version without correction factor, which would be 1.00 for all known boards anyway. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-10mmc: sdhci: use the generic error numberJaehoon Chung
Use the generic error number instead of meaningless value. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-10mmc: sdhci: use the host version value in sdhci_setup_cfgJaehoon Chung
"host->version" isn't a SoC specific value. It doesn't need to get in each SoC drivers. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-10-10mmc: dw_mmc: remove the unnecessary arguments for dwmci_setup_cfgJaehoon Chung
Some arguments don't need to pass to dwmci_setup_cfg. They are already included in dwmci_host structure. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-10mmc: s5p_sdhci: support the Driver model for ExynosJaehoon Chung
This patch support the driver model for s5p_sdhci controller. To support the legacy model, maintained the existing code. Note: If use the Driver Model, it needs to modify the device-tree. In future, will update the Device-tree and enable the configuratioin. (CONFIG_BLK, CONFIG_DM_MMC and CONFING_DM_MMC_OPS) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-09dm: mmc: Support eraseSimon Glass
At present erase is not suported with CONFIG_DM_OPS. Add it so that MMC devices can be erased. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-10reset: uniphier: add reset controller driver for UniPhier SoCsMasahiro Yamada
This is the initial commit for UniPhier reset controller driver. Most code was ported from Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10reset: declare fdtdec_phandle_args as struct to fix warningMasahiro Yamada
The of_xlate() callback needs to know fdtdec_phandle_args is struct. Otherwise, the following warning is displayed. include/reset-uclass.h:40:11: warning: 'struct fdtdec_phandle_args' declared inside parameter list struct fdtdec_phandle_args *args); ^ include/reset-uclass.h:40:11: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: insert udelay() just before support_card_reset_deassert()Masahiro Yamada
As for LD11/LD20, we can no longer rely on the udelay() in the PLL init functions. udelay(200) is needed here to keep the ethernet device in the reset state for enough time. Anyway, 200 usec is quite short for humans, so nobody cares it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: define CONFIG_SMC911X along with CONFIG_MICRO_SUPPORT_CARDMasahiro Yamada
This is an on-board Ethernet device. It has no point if the Micro Support Card is not available. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: enable CONFIG_SYS_NO_FLASH if no CONFIG_MICRO_SUPPORT_CARDMasahiro Yamada
NOR flash devices are seldom used on UniPhier platforms these days. The only use case I see is the Micro Support Card is connected. Otherwise, define CONFIG_SYS_NO_FLASH to disable NOR FLASH. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: fix typos in a comment blockMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: add work-around for VBO noise problemMasahiro Yamada
Raise the VDD09 voltage line to 1.0V to suppress VBO noise. This errata work-around code is needed only for ES1. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: update DRAM init code for LD20 SoC (2nd)Masahiro Yamada
- Do not reference CONFIG_DDR_FREQ; now the DDR frequency is passed from the uniphier_board_data structure - Constify parameter arrays - Tidy up cluttered macros - Lots of code cleanups - Lots of coding style fixes Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: enable SSC for DPLL (DRAM PLL) on LD11 SoCMasahiro Yamada
For Electro-Magnetic Compatibility test. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: do not setup pins for System Bus on NAND boot modeMasahiro Yamada
For LD11 and LD20 SoCs, the System Bus and NAND are multiplexed in the same I/O pins. When booting from a NAND device, pin-mux for the System Bus must not be set-up because they are exclusive with each other. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-09tools: buildman: Add compiler wrapperYork Sun
Now we can use compiler wrapper such as ccache or distcc for buildman. Signed-off-by: York Sun <york.sun@nxp.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09tools: buildman: Remove duplicated codeYork Sun
Signed-off-by: York Sun <york.sun@nxp.com> CC: Simon Glass <sjg@chromium.org> Fixed commit subject: Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09dtoc: Make integer division python 3.x safePaul Burton
If we use the '/' operator then python 3.x will produce a float, and refuse to multiply the string sequence in Conv_name_to_c by it with: TypeError: can't multiply sequence by non-int of type 'float' Use the '//' operator instead to enforce that we want integer rather than floating point division. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09dtoc: Decode strings for struct.unpack on python 3.xPaul Burton
On python 3.x struct.unpack will complain if we provide it with a string since it expects to operate on a bytes object. In order to satisfy this requirement, encode the string to a bytes object when running on python 3.x. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09dtoc: Use items() to iterate over dictionaries in python 3.xPaul Burton
In python 3.x the iteritems() method has been removed from dictionaries, and the items() method does effectively the same thing. On python 2.x using items() is a little less efficient since it involves copying data, but as speed isn't a concern in the affected code switch to using items() anyway for simplicity. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09patman: Fix doctest StringIO import for python 3.xPaul Burton
In python 3.x StringIO is no longer a module, and the class can instead be found in the io module. Adjust the code in the doctest input to account for both. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09patman: Use items() to iterate over dictionariesPaul Burton
In python 3.x the iteritems() method has been removed from dictionaries, and the items() method does effectively the same thing. On python 2.x using items() is a little less efficient since it involves copying data, but as speed isn't a concern in this code switch to using items() anyway for simplicity. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09patman: Import 'configparser' lower case to be python 3.x safePaul Burton
In python 3.x module names used in import statements are case sensitive, and the configparser module is named in all lower-case. Import it as such in order to avoid errors when running with python 3.x. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09patman: Make exception handling python 3.x safePaul Burton
Syntax for exception handling is a little more strict in python 3.x. Convert all uses to a form accepted by both python 2.x & python 3.x. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09patman: Make print statements python 3.x safePaul Burton
In python 3.x, print must be used as a function call. Convert all print statements to the function call style, importing from __future__ where we print with no trailing newline or print to a file object. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09patman: Replace tabs with spacesPaul Burton
In preparation for running on python 3.x, which will refuse to run scripts which mix tabs & spaces for indentation, replace 2 tab characters present in series.py with spaces. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09dtoc: Add a way for tests to request the fallback librarySimon Glass
We need to test both the normal (Python libfdt module) and fallback (fdtget) implementations of the Fdt class. Add a way to select which implementation to use. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09dtoc: Adjust GetProps() in fdt_normal to use the node pathSimon Glass
There is no need to pass a node path separately. Instead we should use the path for the node provided. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09dtoc: Fix bug in GetProp()Simon Glass
This does not actually call fdtget correctly when requesting a particular type. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09cros_ec: Fix issue with cros_ec_flash_write commandMoritz Fischer
This commit fixes an issue where data is written to an invalid memory location. The issue has been introduced in commit (88364387 cros: add cros_ec_driver) Cc: Simon Glass <sjg@chromium.org> Cc: u-boot@lists.denx.de Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-09cros_ec: Add crosec flashinfo commandMoritz Fischer
Add command to print out the flash info as reported by the ec. The data read back includes size, write block size, erase block size. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Simon Glass <sjg@chromium.org> Cc: u-boot@lists.denx.de Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09cros_ec: Add function to read back flash parametersMoritz Fischer
Add support for reading back flash parameters as reported by the ec. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Simon Glass <sjg@chromium.org> Cc: u-boot@lists.denx.de Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09buildman: Drop the 'alive' flag in BuilderThreadSimon Glass
This is not used, so drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09buildman: Don't show a stacktrace on Ctrl-CSimon Glass
When Ctrl-C is pressed, just exited quietly. There is no sense in displaying a stack trace since buildman will always be in the same place: waiting for threads to complete building all the jobs on the queue. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09buildman: Drop the 'active' flag in the builderSimon Glass
This serves no real purpose, since when we are not active, we exit. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-19 05:39:40 +0000