summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-12-17AVR32: Fix wrong pin setup for USART3Haavard Skinnemoen
As reported by Gerhard Berghofer: in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18 instead of PB18 and PB19. which is obviously correct. There's currently no code that uses USART3, but custom boards may run into problems. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17README: Remove ATSTK1000 daughterboard listHaavard Skinnemoen
As noted by Kim Phillips, these lists tend to become out of date. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17Add ATSTK100[234] to MAINTAINERSHaavard Skinnemoen
Add all the ATSTK1000 daughterboards to MAINTAINERS along with their "mother". Also update the entry for ATSTK1000 to be not only about the AP7000 CPU; it's intended to handle all CPUs in the AT32AP family. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17AVR32: Add support for the ATSTK1004 boardHaavard Skinnemoen
ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU, which is a derivative of AT32AP7000. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17AVR32: Add support for the ATSTK1003 boardHaavard Skinnemoen
ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU, which is a derivative of AT32AP7000. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17AVR32: Make some AT32AP700x peripherals optionalHaavard Skinnemoen
Add a chip-features file providing definitions of the form AT32AP700x_CHIP_HAS_<peripheral> to indicate the availability of the given peripheral on the currently selected chip. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17AVR32: Rename at32ap7000 -> at32ap700xHaavard Skinnemoen
The SoC-specific code for all the AT32AP700x CPUs is practically identical; the only difference is that some chips have less features than others. By doing this rename, we can add support for the AP7000 derivatives simply by making some features conditional. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17atmel_mci: Show SR when block read failsHaavard Skinnemoen
Show controller status as well as card status when an error occurs during block read. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13cfi_flash: Use map_physmem() and unmap_physmem()Haavard Skinnemoen
Use map_physmem() and unmap_physmem() to convert from physical to virtual addresses. This gives the arch a chance to provide an uncached mapping for flash accesses. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13Introduce map_physmem() and unmap_physmem()Haavard Skinnemoen
map_physmem() returns a virtual address which can be used to access a given physical address without involving the cache. unmap_physmem() should be called when the virtual address returned by map_physmem() is no longer needed. This patch adds a stub implementation which simply returns the physical address cast to a uchar * for all architectures except AVR32, which converts the physical address to an uncached virtual mapping. unmap_physmem() is a no-op on all architectures, but if any architecture needs to do such mappings through the TLB, this is the hook where those TLB entries can be invalidated. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13cfi_flash: Introduce read and write accessorsHaavard Skinnemoen
Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use them to access the flash memory. This makes it clearer when the flash is actually being accessed; merely dereferencing a volatile pointer looks just like any other kind of access. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13Implement __raw_{read,write}[bwl] on all architecturesHaavard Skinnemoen
This adds implementations of __raw_read[bwl] and __raw_write[bwl] to m68k, ppc, nios and nios2. The m68k and ppc implementations were taken from Linux. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13cfi_flash: Reorder functions and eliminate extra prototypesHaavard Skinnemoen
Reorder the functions in cfi_flash.c so that each function only uses functions that have been defined before it. This allows the static prototype declarations near the top to be eliminated and might allow gcc to do a better job inlining functions. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13cfi_flash: Make some needlessly global functions staticHaavard Skinnemoen
Make functions not declared in any header file static. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13cfi_flash: Break long linesHaavard Skinnemoen
This patch tries to keep all lines in the cfi_flash driver below 80 columns. There are a few lines left which don't fit this requirement because I couldn't find any trivial way to break them (i.e. it would take some restructuring, which I intend to do in a later patch.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13CFI: synchronize command offsets with Linux CFI driverBartlomiej Sieka
Fixes non-working CFI Flash on the Inka4x0 board. Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-12-11Handle MPC85xx PCIe reset errata (PCI-Ex 38)Kumar Gala
On the MPC85xx boards that have PCIe enable the PCIe errata fix. (MPC8544DS, MPC8548CDS, MPC8568MDS). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Update Freescale MPC85xx ADS/CDS/MDS board configKumar Gala
* Enabled CONFIG_CMD_ELF Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Handle Asynchronous DDR clock on 85xxKumar Gala
The MPC8572 introduces the concept of an asynchronous DDR clock with regards to the platform clock. Introduce get_ddr_freq() to report the DDR freq regardless of sync/async mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Update Freescale MPC85xx ADS/CDS/MDS board configKumar Gala
* Removed some misc environment setup * Enabled CONFIG_CMDLINE_EDITING Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.Kumar Gala
Minor path corrections needed to ensure buildability. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Move the MPC8540 ADS board under board/freescale.Kumar Gala
Minor path corrections needed to ensure buildability. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Move the MPC8560 ADS board under board/freescale.Kumar Gala
Minor path corrections needed to ensure buildability. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Move the MPC8568 MDS board under board/freescale.Kumar Gala
Minor path corrections needed to ensure buildability. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xxKumar Gala
We already had defines for LAWAR_TRGT_IF_* that we should use rather than creating new ones. Also, added some missing defines for PCIE targets. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Stop using immap_t on 85xxKumar Gala
In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_*_ADDR as the base of the registers instead of getting it via &immap. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdtKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Update MPC8568 MDS to use libfdtKumar Gala
Updated the MPC8568 MDS config to use libfdt and assume use of aliases for ethernet, pci, and serial for the various fixups that are done. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Add PCI Express support on MPC8568MDSHaiying Wang
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Update MPC85xx CDS to use libfdtKumar Gala
Updated the MPC85xx CDS config to use libfdt and assume use of aliases for ethernet, pci, and serial for the various fixups that are done. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Update MPC8540 ADS to use libfdtKumar Gala
Updated the MPC8540 ADS config to use libfdt and assume use of aliases for ethernet, pci, and serial for the various fixups that are done. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Update MPC8560 ADS to use libfdtKumar Gala
Updated the MPC8560 ADS config to use libfdt and assume use of aliases for ethernet, pci, and serial for the various fixups that are done. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Stop using immap_t for cpm offset on 85xxKumar Gala
In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers instead of getting it via &immap->im_cpm. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Stop using immap_t for guts offset on 85xxKumar Gala
In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers instead of getting it via &immap->im_gur. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Update MPC8544 DS configKumar Gala
* Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2 * Removed some misc environment setup * Moved to using fdtfile & fdtaddr as fdt env var names * Enabled CONFIG_CMDLINE_EDITING Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Update MPC8544DS to use libfdtKumar Gala
Updated the MPC8544DS config to use libfdt and assume use of aliases for ethernet, pci, and serial for the various fixups that are done. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11Add libfdt based ft_cpu_setup for mpc85xxKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11ppc4xx: Correct GPIO offset in gpio_config()Stefan Roese
Thanks to Gary Jennejohn for pointing this out. Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-11rtc: Fix merging problemStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-11Merge commit 'u-boot/master' into for-1.3.1Stefan Roese
Conflicts: drivers/rtc/Makefile
2007-12-08ppc4xx: 405EX: Correctly enable USB pinsStefan Roese
This patch selects the USB data pins in the 405EX GPIO and MFC (multi function control) registers. This is done for the AMCC Kilauea and Makalu eval boards. Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-08CFI: Coding style cleanupStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-08CFI: support JEDEC flash roms in CFI-flash frameworkMichael Schwingen
The following patch adds support for non-CFI flash ROMS, by hooking into the CFI flash code and using most of its code, as recently discussed here in the thread "Mixing CFI and non-CFI flashs". Signed-off-by: Michael Schwingen <michael@schwingen.org> Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-07Conditionally compile fdt_fixup_ethernet()Gerald Van Baren
Fix compiler warnings: On boards that don't have ethernets defined, don't compile fdt_fixup_ethernet().
2007-12-07Convert boards that set memory node to use fdt_fixup_memory()Kumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07Added fdt_fixup_stdout that uses aliases to set linux,stdout-pathKumar Gala
We use a combination of the serialN alias and CONFIG_CONS_INDEX to determine which serial alias we should set linux,stdout-path to. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07Add common memory fixup functionKumar Gala
Add the function fdt_fixup_memory() to fixup the /memory node of the fdt Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07Conditionally compile fdt_support.cKumar Gala
Modify common/Makefile to conditionally compile fdt_support.c based on CONFIG_OF_LIBFDT. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07Fix build breakage due to libfdt importKumar Gala
The IDS8247 got lost in the update and need an API update do to rename of functions in libfdt. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07Add spaces around the = in the fdt print format.Gerald Van Baren
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
generated by cgit (git 2.34.1) at 2024-12-29 01:45:58 +0000