summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-14arm: Show cache warnings in U-Boot proper onlySimon Glass
Avoid bloating the SPL image size. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14Add warn_non_spl() to show a message in U-Boot properSimon Glass
SPL tends to be more space-constrained that U-Boot proper. Some error messages are best suppressed in SPL. Add a macros to make this easy. warn_non_spl() does nothing when built in SPL code. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14Add comments for debug() and pr_fmtSimon Glass
Add a note to each of these so it is more obvious how they work. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14arm: Don't invalidate unaligned cache regionsSimon Glass
At present armv7 will unhappily invalidate a cache region and print an error message. Make it skip the operation instead, as it does with other cache operations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
2016-07-14arm: Move check_cache_range() into a common placeSimon Glass
This code is common, so move it into a common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
2016-07-14board_f: prevent misleading "Watchdog enabled" outputAnatolij Gustschin
Output the "Watchdog enabled" message only if hw_watchdog_init() call really happened. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-07-14board_f: init designware watchdog if CONFIG_DESIGNWARE_WATCHDOG=yAnatolij Gustschin
The designware watchdog init is skipped even if CONFIG_DESIGNWARE_WATCHDOG is enabled. Fix it. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-07-14configs: da850evm: enable bootz commandSekhar Nori
Enable bootz command on Texas Instruments DA850 EVM board. This helps it boot zImage with device-tree blob passed. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Kevin Hilman <khilman@baylibre.com>
2016-07-14ARM: OMAP5+: Enable errata i727Lokesh Vutla
Errata i727 is applicable on all OMAP5 and DRA7 variants but enabled only on OMAP5 ES1.0. So, enable it on all platforms. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14mkimage: fix missing break for -p switchTeddy Reed
Signed-off-by: Teddy Reed <teddy.reed@gmail.com> Reported-by: Coverity (CID: 150277) Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14bootm: fixup silent Linux out of BOOTM_STATE_LOADOS stateHector Palacios
The function fixup_silent_linux() is called in status BOOTM_STATE_LOADOS to silence Linux if variable 'silent' is set. Currently only the 'bootm' command state machine contains BOOTM_STATE_LOADOS, but others like 'booti' or 'bootz' commands do not. This means silent Linux does not work with these commands. This patch moves the fixup_silent_linux() call out of the BOOTM_STATE_LOADOS state and into BOOTM_STATE_OS_PREP, to silence Linux independently of the used command (booti, bootm or bootz). Signed-off-by: Hector Palacios <hector.palacios@digi.com>
2016-07-14stm32: Change USART port to USART6 for stm32f746 discovery boardToshifumi NISHINAGA
This change is to remove a halt at about 200KiB while sending a large(1MiB) binary to a micro controller using USART1. USART1 is connected to a PC via an on-board ST-Link debugger that also functions as a USB-Serial converter. However, it seems to loss some data occasionally. So I changed the serial port to USART6 and connected it to the PC using an FTDI USB-Serial cable, therefore the transmission was successfully completed. Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14stm32: Add SDRAM support for stm32f746 discovery boardToshifumi NISHINAGA
This patch adds SDRAM support for stm32f746 discovery board. This patch depends on previous patch. This patch is based on STM32F4 and emcraft's[1]. [1]: https://github.com/EmcraftSystems/u-boot Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14stm32: clk: Add 200MHz clock configuration for stm32f746 discovery boardToshifumi NISHINAGA
This patch adds 200MHz clock configuration for stm32f746 discovery board. This patch is based on STM32F4 and emcraft's[1]. [1]: https://github.com/EmcraftSystems/u-boot Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14dragonboard410c: adding missing default addr for script and pxe bootRicardo Salveti de Araujo
Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Ricardo Salveti <rsalveti@rsalveti.net>
2016-07-14dragonboard410c: prefer sdcard boot over emmcRicardo Salveti de Araujo
Make the external devices the preferred ones when booting the system (usb is already the first option). This allows users to easily boot custom distributions without requiring them to reflash/customize u-boot. Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Ricardo Salveti <rsalveti@rsalveti.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Andreas Färber <afaerber@suse.de> Acked-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
2016-07-14test: Convert the vboot test to test/pySimon Glass
Now that we have a suitable test framework we should move all tests into it. The vboot test is a suitable candidate. Rewrite it in Python and move the data files into an appropriate directory. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14tools: Correct error handling in fit_image_process_hash()Simon Glass
We should not be returning -1 as an error code. This can mask a situation where we run out of space adding things to the FIT. By returning the correct error in this case (-ENOSPC) it can be handled by the higher-level code. This may fix the error reported by Tom Van Deun here: https://www.mail-archive.com/u-boot@lists.denx.de/msg217417.html although I am not sure as I cannot actually repeat it. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Tom Van Deun <tom.vandeun@wapice.com> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14tools: Add an error code when fit_handle_file() failsSimon Glass
The error code may provide useful information for debugging. Add it to the error string. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Add a helper to run a list of U-Boot commandsSimon Glass
Some tests want to execute a sequence of commands. Add a helper for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Provide a way to check that a command failsSimon Glass
Sometimes we want to run a command and check that it fails. Add a function to handle this. It can check the return code and also make sure that the output contains a given error message. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14test/py: Add an option to execute a string containing a commandSimon Glass
It is sometimes inconvenient to convert a string into a list for execution with run_and_log(). Provide a helper function to do this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Return output from run_and_log()Simon Glass
It is useful to be able to obtain the output from a command. Return it from this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Provide output from exceptions with RunAndLog()Simon Glass
Tests may want to look at the output from running a command, even if it fails (e.g. with a non-zero return code). Provide a means to obtain this. Another approach would be to return a class object containing both the output and the exception, but I'm not sure if that would result in a lot of refactoring. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Allow RunAndLog() to return the outputSimon Glass
Tests may want to look at the output from running a command. Return it so that this is possible. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Allow tests to control the sandbox device-tree fileSimon Glass
Normally tests will run with the test.dtb file designed for this purpose. However, the verified boot tests need to run with their own device-tree file, containing a public key. Make the device-tree file a config option so that it can be adjusted by tests. The default is to keep the current behaviour. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14sandbox: Don't exit when bootm completesSimon Glass
At present sandbox exits when the 'bootm' command completes, since it is not actually able to run the OS that is loaded. Normally 'bootm' failure is considered a fatal error in U-Boot. However this is annoying for tests, which may want to examine the state after a test is complete. In any case there is a 'reset' command which can be used to exit, if required. Change the behaviour to return normally from the 'bootm' command on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test: Add a simple script to run tests on sandboxSimon Glass
A common check before sending patches is to run all available tests on sandbox. But everytime I do this I have to look up the README. This presents quite a barrier to actually doing this. Add a shell script to help. To run the tests, type: test/run in the U-Boot directory, which should be easy to remember. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test: Add a READMESimon Glass
Add a few notes about how testing works in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14tools: Allow building with debug enabledSimon Glass
Sometimes it is useful to build tools with debugging information included so that line-number information is available when run under gdb. Add a Kconfig option to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14mkimage: Show item lists for all categoriesSimon Glass
Update the error-handling code for -A, -C and -O to show a list of valid options when an invalid one is provided. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Vinoth Eswaran <evinoth1206@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14mkimage: Use generic code for showing an 'image type' errorSimon Glass
The existing error code only displays image types which are claimed by a particular U_BOOT_IMAGE_TYPE() driver. But this does not seem correct. The mkimage tool should support all image types, so it makes sense to allow creation of images of any type with the tool. When an incorrect image type is provided, use generic code to display the error. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14mkimage: Allow display of a list of any image header categorySimon Glass
Add a generic function which can display a list of items in any category. This will allow displaying of images for the -A, -C, -O and -T flags. At present only -T is supported. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14image: Add functions to obtain category informationSimon Glass
Add generic functions which can look up information about a category: - the number of items in the category - the category description - an item long time - an item short time Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14image: Add a name for invalid typesSimon Glass
At present the name is NULL, which prevents qsort() fromp being used. Use the name "invalid" instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14image: Create a table of information for each categorySimon Glass
Add a table that contains the category name, the number of items in each category and a pointer to the table of items. This will allow us to use generic code to deal with the categories. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14image: Convert the IH_... values to enumsSimon Glass
We need to know the number of values of each category (architecture, compression, OS and image type). To make this value easier to maintain, convert all values to enums. The count is then automatic. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14image: Correct auto-fit architecture property nameSimon Glass
The fit_write_images() function incorrectly uses the long name for the architecture. This cannot be parsed with the FIT is read. Fix this by using the short name instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14mkimage: Drop blank line before main()Simon Glass
This is not needed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14mkimage: Drop premature setting of params.fit_image_typeSimon Glass
There is no need to set params.fit_image_type while parsing the arguments. It is set up later anyway. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14mkimage: Require a data file when auto-fit is usedSimon Glass
When auto-fit is used, it is not valid to create a FIT without an image file. Add a check for this to avoid a very confusing error message later ("Can't open (null): Bad address"). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14mkimage: Explain the auto-fit imagefile special caseSimon Glass
There is a special case in the code when auto-fit is used. Add a comment to make it easier to understand why this is needed. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-07-14mkimage: Honour the default image type with auto-fitSimon Glass
The default image type is supposed to be IH_TYPE_KERNEL, as set in the 'params' variable. Honour this with auto-fit also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14linux/io.h: add generic ioremap()/iounmap() definesMasahiro Yamada
For most of architectures in U-Boot, virtual address is straight mapped to physical address. So, it makes sense to have generic defines of ioremap and friends in <linux/io.h>. All of them are just empty and will disappear at compile time, but they will be helpful to implement drivers which are counterparts of Linux ones. I notice MIPS already has its own implementation, so I added a Kconfig symbol CONFIG_HAVE_ARCH_IOREMAP which MIPS (and maybe Sandbox as well) can select. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-07-14arm, nds32, sh: remove useless ioremap()/iounmap() definesMasahiro Yamada
These defines are valid only when iomem_valid_addr is defined, but I do not see such defines anywhere. Remove. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-14types.h: move and redefine resource_size_tMasahiro Yamada
Currently, this is only defined in arch/arm/include/asm/types.h, so move it to include/linux/types.h to make it available for all architectures. I defined it with phys_addr_t as Linux does. I needed to surround the define with #ifdef __KERNEL__ ... #endif to avoid build errors in tools building. (Host tools should not include <linux/types.h> in the first place, but this is already messy in U-Boot...) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-14doc: Update info on using secure devices from TIAndreas Dannenberg
Adds information regarding SPL handling the loading and processing of secured u-boot images as part of the second stage boot the SPL does. Introduces the description of a new interface script in the TI SECDEV Package which handles the creation and prep of secured binary images. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-14arm: am4x: add U-Boot FIT signing and SPL image post-processingMadan Srinivas
Modify the SPL build procedure for AM437x high-security (HS) device variants to create a secure u-boot_HS.img FIT blob that contains U-Boot and DTB artifacts signed (and optionally encrypted) with a TI-specific process based on the CONFIG_TI_SECURE_DEVICE config option and the externally-provided image signing tool. Also populate the corresponding FIT image post processing call to be performed during SPL runtime. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14arm: omap5: add U-Boot FIT signing and SPL image post-processingAndreas Dannenberg
Modify the SPL build procedure for AM57xx and DRA7xx high-security (HS) device variants to create a secure u-boot_HS.img FIT blob that contains U-Boot and DTB artifacts signed with a TI-specific process based on the CONFIG_TI_SECURE_DEVICE config option and the externally-provided image signing tool. Also populate the corresponding FIT image post processing call to be performed during SPL runtime. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14spl: fit: add support for post-processing of imagesDaniel Allred
The next stage boot loader image and the selected FDT can be post- processed by board/platform/device-specific code, which can include modifying the size and altering the starting source address before copying these binary blobs to their final destination. This might be desired to do things like strip headers or footers attached to the images before they were packaged into the FIT, or to perform operations such as decryption or authentication. Introduce new configuration option CONFIG_SPL_FIT_IMAGE_POST_PROCESS to allow controlling this feature. If enabled, a platform-specific post-process function must be provided. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-29 18:25:46 +0000