summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-04main: Move boot_delay code into its own functionSimon Glass
Move this code into its own function, since it clutters up main_loop(). Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-04main: Separate out the two abortboot() functionsSimon Glass
There are two implementations of abortboot(). Turn these into two separate functions, and create a single abortboot() which calls either one or the other. Also it seems that nothing uses abortboot() outside main, so make it static. At this point there is no further use of CONFIG_MENU in main.c. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2013-06-04net: Add prototype for update_tftpSimon Glass
This function should be declared in net.h. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2013-06-04at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263Simon Glass
This is not currently used, since autoboot is not enabled for this board, but the string is missing a parameter. Add it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-06-04bug, nand, am33xx: nand->ecc.strength not set in board_nand_init()Sergey Lapin
commit dfe64e2c89731a3f9950d7acd8681b68df2bae03 Author: Sergey Lapin <slapin@ossfans.org> Date: Mon Jan 14 03:46:50 2013 +0000 mtd: resync with Linux-3.7.1 Introduced runtime bug: U-Boot 2013.04-00499-g46567df-dirty (Jun 04 2013 - 08:17:08) I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: BUG: failure at nand_base.c:3214/nand_scan_tail()! BUG! resetting ... on boards using drivers/mtd/nand/omap_gpmc.c as in board_nand_init() nand->ecc.strength is not set. Fix this! Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Scott Wood <scottwood@freescale.com> Cc: Tom Rini <trini@ti.com>
2013-06-04Add support for Congatec Conga-QEVAl boardSARTRE Leo
Add minimal support (only boot from mmc device) for the Congatec Conga-QEVAl Evaluation Carrier Board with conga-Qmx6q (i.MX6 Quad processor) module. Signed-off-by: Leo Sartre <lsartre@adeneo-embedded.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-06-03wandboard: Add Boot Splash image with Wandboard logoOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-06-03wandboard: Enable HDMI splashscreenFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-06-03build: Use generic boot logo matchingOtavio Salvador
The boot logo matching is now done in following way: - use LOGO_BMP if it is set, or - use $(BOARD).bmp if it exists in tools/logos, or - use $(VENDOR).bmp if it exists in tools/logos, or - use denx.bmp otherwise. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Wolfgang Denk <wd@denx.de>
2013-06-03mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signalAndrew Gabbasov
The number of gpio signal is packed inside CONFIG_SF_DEFAULT_CS macro (shifted and or'ed with chip select), so it's incorrect to pass that macro directly as an argument to gpio_direction_output() call. Also, SPI driver sets the direction and initial value of a gpio, used as a chip select signal, before any actual activity happens on the bus. So, it is safe to just remove the gpio_direction_output call, that works incorrectly, thus making no effect, anyway. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Tested-by: Robert Winkler <robert.winkler@boundarydevices.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2013-06-03mx6qsabreauto: Add Port Expander resetRenato Frias
There are 3 IO expanders on the mx6qsabreauto all reset by the same GPIO, just set it to high to use the IO. Signed-off-by: Renato Frias <b13784@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2013-06-03mx6qsabreauto: Add i2c to mx6qsabreauto boardRenato Frias
Add i2c2 and 3 to mx6qsabreauto board, i2c3 is multiplexed use gpio to set steering. Signed-off-by: Renato Frias <b13784@freescale.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2013-06-03mx6slevk: Allow booting a device tree kernelFabio Estevam
When the mx6slevk board support was added in U-boot there was no device tree support for mx6sl, so only a FSL 3.0.35 was tested at that time. Now that mx6slevk support is available we can boot a device tree kernel, by adjusting CONFIG_LOADADDR into a proper location, so that a non-dt and a dt kernels can be booted. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-06-03arm: mxs: Fix vectoring table craftingMarek Vasut
The vectoring table has to be placed at 0x0, but U-Boot on MX23/MX28 starts from RAM, so the vectoring table at 0x0 is not present. Craft code that will be placed at 0x0 and will redirect interrupt vectoring to proper location of the U-Boot in RAM. Signed-off-by: Marek Vasut <marex@denx.de> CC: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-06-03arm: vf610: Add basic support for Vybrid VF610TWR boardAlison Wang
VF610TWR is a board based on Vybrid VF610 SoC. This patch adds basic support for Vybrid VF610TWR board. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: TsiChung Liew <tsicliew@gmail.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-03arm: vf610: Add Vybrid VF610 to mxc_ocotp documentAlison Wang
This patch adds Vybrid VF610 to mxc_ocotp document. Signed-off-by: Alison Wang <b18965@freescale.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-03arm: vf610: Add uart support for Vybrid VF610Alison Wang
This patch adds lpuart support for Vybrid VF610 platform. Signed-off-by: TsiChung Liew <tsicliew@gmail.com> Signed-off-by: Alison Wang <b18965@freescale.com>
2013-06-03arm: vf610: Add watchdog support for Vybrid VF610Alison Wang
This patch adds watchdog support for Vybrid VF610 platform. Signed-off-by: Alison Wang <b18965@freescale.com>
2013-06-03net: fec_mxc: Add support for Vybrid VF610Alison Wang
This patch adds FEC support for Vybrid VF610 platform. In function fec_open(), RCR register is only set as RGMII mode. But RCR register should be set as RMII mode for VF610 platform. This configuration is already done in fec_reg_setup(), so this piece of code could just leave untouched the FEC_RCNTRL_RGMII / FEC_RCNTRL_RMII / FEC_RCNTRL_MII_MODE bits. Signed-off-by: Alison Wang <b18965@freescale.com> Reviewed-by: Benoit Thebaudeau <benoit.thebaudeau@advansee.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-03arm: vf610: Add Vybrid VF610 CPU supportAlison Wang
This patch adds generic codes to support Freescale's Vybrid VF610 CPU. It aligns Vybrid VF610 platform with i.MX platform. As there are some differences between VF610 and i.MX platforms, the specific codes are in the arch/arm/cpu/armv7/vf610 directory. Signed-off-by: Alison Wang <b18965@freescale.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-03arm: vf610: Add IOMUX support for Vybrid VF610Alison Wang
This patch adds the IOMUX support for Vybrid VF610 platform. There is a little difference for IOMUXC module between VF610 and i.MX platform, the muxmode and pad configuration share one 32bit register on VF610, but they are two independent registers on I.MX platform. A CONFIG_IOMUX_SHARE_CONFIG_REG was introduced to fit this difference. Signed-off-by: Alison Wang <b18965@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-03tpm: Reorganize the I2C TPM driverTom Wai-Hong Tam
This patch does a similar code reogranzation from http://patchwork.ozlabs.org/patch/132179/ which is based on an old version of code (fdt support and bus selection still not in). It merges this tidy-up on top of the recent code. It does not make any logical change. tpm.c implements the interface defined in tpm.h based on underlying LPC or I2C TPM driver. tpm.c and the underlying driver communicate throught tpm_private.h. Note: Merging the LPC driver with tpm.c is left to future patches. Change-Id: Ie1384f5f9e3935d3bc9a44adf8de80c5a70a5f2b Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2013-06-03tpm: Add support for new Infineon I2C TPM (SLB 9645 TT 1.2 I2C)Vincent Palatin
Add support for Infineon's new SLB 9645 TT 1.2 I2C TPMs, which supports clockstretching, combined reads and a bus speed of up to 400khz. The device also has a new device id. This is based on the kernel patch provided by Infineon : https://gerrit.chromium.org/gerrit/42332 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Luigi Semenzato <semenzato@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vincent Palatin <vpalatin@chromium.org> Tested-by: Tom Wai-Hong Tam <waihong@chromium.org> Tested-by: Vincent Palatin <vpalatin@chromium.org>
2013-06-03x86: config: Reflect the name changes of LPC TPM configsTom Wai-Hong Tam
The new name is more aligned with Linux kernel's naming of TPM driver. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2013-06-03tpm: Rename generic_lpc_tpm to tpm_tis_lpcChe-liang Chiou
The new name is more aligned with Linux kernel's naming of TPM driver. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Wai-Hong Tam <waihong@chromium.org>
2013-06-03cmd_sf: Add print mesgs on sf read/write commandsJagannadha Sutradharudu Teki
This patch adds a print messages while using 'sf read' and 'sf write' commands to make sure that how many bytes read/written from/into flash device. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Acked-by: Tom Rini <trini@ti.com>
2013-06-03cmd_sf: Add print mesg for 'sf erase' commandJagannadha Sutradharudu Teki
This patch adds a print messages while using 'sf erase' command to make sure that how many bytes erased in flash device. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Acked-by: Tom Rini <trini@ti.com>
2013-06-03sf: Fix sf read for memory-mapped SPI flashesJagannadha Sutradharudu Teki
Missing return after memcpy is done for memory-mapped SPI flashes, hence added retun 0 after memcpy done. The return is missing in below patch "sf: Enable FDT-based configuration and memory mapping" (sha1: bb8215f437a7c948eec82a6abe754c226978bd6d) Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Acked-by: Simon Glass <sjg@chromium.org>
2013-06-03spi: exynos: Support SPI_PREAMBLE modeRajeshwari Shinde
Support interfaces with a preamble before each received message. We handle this when the client has requested a SPI_XFER_END, meaning that we must close of the transaction. In this case we read until we see the preamble (or a timeout occurs), skipping all data before and including the preamble. The client will receive only data bytes after the preamble. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-06-03spi: Add support for preamble bytesRajeshwari Shinde
A SPI slave may take time to react to a request. For SPI flash devices this time is defined as one bit time, or a whole byte for 'fast read' mode. If the SPI slave is another CPU, then the time it takes to react may vary. It is convenient to allow the slave device to tag the start of the actual reply so that the host can determine when this 'preamble' finishes and the actual message starts. Add a preamble flag to the available SPI flags. If supported by the driver then it will ignore any received bytes before the preamble on each transaction. This ensures that reliable communication with the slave is possible. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-05-31Merge branch 'master' of git://git.denx.de/u-boot-nand-flashTom Rini
2013-05-31mtd: resync with Linux-3.7.1Sergey Lapin
This patch is essentially an update of u-boot MTD subsystem to the state of Linux-3.7.1 with exclusion of some bits: - the update is concentrated on NAND, no onenand or CFI/NOR/SPI flashes interfaces are updated EXCEPT for API changes. - new large NAND chips support is there, though some updates have got in Linux-3.8.-rc1, (which will follow on top of this patch). To produce this update I used tag v3.7.1 of linux-stable repository. The update was made using application of relevant patches, with changes relevant to U-Boot-only stuff sticked together to keep bisectability. Then all changes were grouped together to this patch. Signed-off-by: Sergey Lapin <slapin@ossfans.org> [scottwood@freescale.com: some eccstrength and build fixes] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-05-30arm: factorize relocate_code routineAlbert ARIBAUD
Replace all relocate_code routines from ARM start.S files with a single instance in file arch/arm/lib/relocate.S. For PXA, this requires moving the dcache unlocking code from within relocate_code into c_runtime_cpu_setup. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Tested-by: Simon Glass <sjg@chromium.org>
2013-05-30arm: do not compile relocate_code() for SPL buildsAlbert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Tested-by: Simon Glass <sjg@chromium.org>
2013-05-30tx25: copy SPL directly, not using relocate_code.Albert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Tested-by: Simon Glass <sjg@chromium.org>
2013-05-30mx31pdk: copy SPL directly, not using relocate_code.Albert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Tested-by: Simon Glass <sjg@chromium.org>
2013-05-30Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD
Conflicts: common/cmd_fpga.c drivers/usb/host/ohci-at91.c
2013-05-28tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL buildAxel Lin
Then we can get rid of the #ifdef CONFIG_TEGRA guard in cpu_init_crit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-05-28ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_critAxel Lin
cpu_init_crit() can be skipped, but the code is still enabled requiring a platform to supply lowlevel_init(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-05-28ARM: tegra: support SKU 7 of Tegra20Stephen Warren
Make U-Boot aware of the Tegra20 SKU 7, and treat it identically to any other Tegra20. My Whistler board has a SoC with this SKU. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-05-28ARM: tegra: support SKU 1 of Tegra114Stephen Warren
Make U-Boot aware of the Tegra114 SKU 1, and treat it identically to any other Tegra114. This value is used on (at least some) Dalmore boards with a production rather than engineering chip. Such boards are in the hands of some partners who want to use upstream U-Boot. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-05-28tegra: always build u-boot-nodtb-tegra.binStephen Warren
Even when eventually building u-boot-dtb-tegra.bin, separately building u-boot-nodtb-tegra.bin can be useful, since building it encapsulates the SPL padding step. If you want to tweak u-boot.dtb and regenerate u-boot-dtb-tegra.bin, it is then a simple cat operation. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-05-28Tegra: clk: always use find_best_divider() for periph clocksAllen Martin
When adjusting peripheral clocks always use find_best_divider() instead of clk_get_divider() even when a secondary divider is not available. In the case where is requested clock is too slow to be derived from the parent clock this allows a best effort to get close to the requested clock. This comes up for commands like "sf" where the user can pass a clock speed on the command line or "sspi" where the clock is hardcoded to 1MHz, but the Tegra114 SPI controller can't go that low. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-05-28Tegra: Remove unused/non-existent spl linker script referenceTom Warren
Tegra builds use the common u-boot-spl.lds now. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-05-28Tegra: T30: Beaver: Fix board/board_name env vars, s/b beaver, not cardhuTom Warren
Did a 'strings u-boot-dtb-tegra.bin | less' and saw that both board and board_name == beaver. Didn't test as I have no T30 Beaver board here. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2013-05-28sf: winbond: Add support for W25PXX SPI flashKuo-Jung Su
Add support for Winbond's W25PXX SPI flash. These devices is used on Faraday A369 evaluation board. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> CC: Tom Rini <trini@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-05-28sf: winbond: Add support for W25Q256Jagannadha Sutradharudu Teki
Add support for Winbond W25Q256 SPI flash. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-05-28sf: spansion: Add Spansion S25FL064P IDsMarek Vasut
This is a S25FL064A successor. It supports up to 104MHz bus speed. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Scott Wood <scottwood@freescale.com> Cc: Wolfgang Denk <wd@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-05-24powerpc/mpc85xx: Clear L1 D-cache lockYork Sun
dcbi instruction has been used to clear D-cache lock. However, the cache lock is persistent for e6500 core. Use dcblc to clear the lock explicitly. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24SECURE BOOT - Removed deletion of TLB entries codeRuchika Gupta
Boot ROM code creates TLB entries for 3.5G space before entering the u-boot. Earlier we were deleting these entries after early initialization of CPU. In recent past, code has been added to invalidate all these entries before relocation of u-boot code. So this code to delete TLB entries after CPU initialization is no longer required. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Acked-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
generated by cgit (git 2.34.1) at 2025-02-11 15:27:07 +0000