summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-19sf: Use spi_flash_alloc() in each SPI flash driverSimon Glass
Rather than each device having its own way to allocate a SPI flash structure, use the new allocation function everywhere. This will make it easier to extend the interface without breaking devices. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19sf: Add spi_flash_alloc() to create a new SPI flash structSimon Glass
At present it is difficult to extend the SPI flash structure since all devices allocate it themselves, and few of them zero all fields. Add a new function spi_flash_alloc() which can be used by SPI devices to perform this allocation, and thus ensure that all devices can better cope with SPI structure changes. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19spi: Use spi_alloc_slave() in each SPI driverSimon Glass
Rather than each driver having its own way to allocate a SPI slave, use the new allocation function everywhere. This will make it easier to extend the interface without breaking drivers. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19spi: Add function to allocate a new SPI slaveSimon Glass
At present it is difficult to extend the SPI structure since all drivers allocate it themselves, and few of them zero all fields. Add a new function spi_alloc_slave() which can be used by SPI drivers to perform this allocation, and thus ensure that all drivers can better cope with SPI structure changes. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19fdt: Add fdtdec_get_addr_size() to read reg propertiesSimon Glass
It is common to have a "reg = <address size>" property in the FDT. Add a function to handle this, similar to the existing fdtdec_get_addr(); Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2013-03-18Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
Albert's rework of the linker scripts conflicted with Simon's making everyone use __bss_end. We also had a minor conflict over README.scrapyard being added to in mainline and enhanced in u-boot-arm/master with proper formatting. Conflicts: arch/arm/cpu/ixp/u-boot.lds arch/arm/cpu/u-boot.lds arch/arm/lib/Makefile board/actux1/u-boot.lds board/actux2/u-boot.lds board/actux3/u-boot.lds board/dvlhost/u-boot.lds board/freescale/mx31ads/u-boot.lds doc/README.scrapyard include/configs/tegra-common.h Build tested for all of ARM and run-time tested on am335x_evm. Signed-off-by: Tom Rini <trini@ti.com>
2013-03-18usb: Add multiple controllers support for EHCI PCIVincent Palatin
Use the ability to have several active EHCI controller on a system in the PCI EHCI controller implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18x86: Enable USB features for corebootSimon Glass
Enable PCI EHCI, storage, keyboard and Ethernet for USB. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18usb: usbeth: smsc95xx: remove EEPROM loaded checkMichael Spang
[port of Linux kernel commit bcd218be5aeb by Steve Glendinning] The eeprom read & write commands currently check the E2P_CMD_LOADED_ bit is set before allowing any operations. This prevents any reading or writing unless a correctly programmed EEPROM is installed. Signed-off-by: Michael Spang <spang@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2013-03-18usb: ehci: Fix aliasing issue in EHCI interrupt codeVincent Palatin
The interrupt endpoint handling code stores the buffer pointer in the QH padding field. We need to make it the size of a pointer to avoid strict aliasing issue with the compiler. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18usb: ehci: Support interrupt transfers via periodic listPatrick Georgi
Interrupt transfers aren't meant to be used from the async list (the EHCI spec indicates trouble with low/full-speed intr on async). Build a periodic list instead, and provide an API to make use of it. Then, use that API from the existing interrupt transfer API. This provides support for USB keyboards using EHCI. Use timeouts to ensure we cannot get stuck in the keyboard scanning if something wrong happens (USB device unplugged or fatal I/O error) Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18usb: ehci: exynos: Enable non-dt pathVivek Gautam
Enabling the non-dt path for the driver so that we don't get any build errors for non-dt configuration. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2013-03-18usb: ehci: exynos: Fix multiple FDT decodeVivek Gautam
With current FDT support driver tries to parse device node twice in ehci_hcd_init() and ehci_hcd_stop(), which shouldn't happen ideally. Making provision to store data in a global structure and thereby passing its pointer when needed. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
2013-03-18arm:trats: Use new ums commandLukasz Majewski
This patch enables new "ums" command on Trats board Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com>
2013-03-18usb:gadget: USB Mass Storage Gadget supportLukasz Majewski
This patch adds the USB Mass Storage Gadget to u-boot New command called "ums" is implemented to provide access to on-device embedded persistent memory. USB Mass Storage is supposed to work on top of the USB Gadget framework Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Marek Vasut <marek.vasut@gmail.com>
2013-03-18usb:composite: USB Mass Storage - f_mass_storage.c from Linux kernelPiotr Wilczek
The f_mass_storage.c source file from v2.6.36 Linux kernel. commit 8876f5e7d3b2a320777dd4f6f5301d474c97a06c Author: Michal Nazarewicz <m.nazarewicz@samsung.com> Date: Mon Jun 21 13:57:09 2010 +0200 USB: gadget: f_mass_storage: added eject callback Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Marek Vasut <marek.vasut@gmail.com>
2013-03-18usb:composite: USB Mass Storage - storage_common.c from Linux kernelLukasz Majewski
The storage_common.c source file from v2.6.36 Linux kernel. commit d26a6aa08b9f12b44fb1ee65625e7480d3d5bb81 Author: Michal Nazarewicz <m.nazarewicz@samsung.com> Date: Mon Nov 9 14:15:23 2009 +0100 USB: g_mass_storage: code cleaned up and comments updated Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Marek Vasut <marek.vasut@gmail.com>
2013-03-18usb:composite:fix Provide function data when addressing device with only one ↵Lukasz Majewski
interface This commit fixes problems with some non-standard requests send with device address instead of interface address (bmRequestType.Receipent field). This happens with dfu-util (debian version: 0.5), which address non standard requests (like w_value=0x21 and bRequest=GET_DESCRIPTOR) to device. Without this fix, the above request is STALLED, and hence causes dfu-util to assume some standard configuration (packet size = 1024B instead of 4096B) In turn it displays following errors: Error obtaining DFU functional descriptor Warning: Assuming DFU version 1.0 Warning: Transfer size can not be detected ... Warning: Trying default transfer size 1024 This fix allows passing non-standard request to function setup code, where it shall be handled. Tested at: Trats (exynos4210) Tested with:DFU and UMS gadgets Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-16usbtty: adapt buffers for large packet supportShiraz Hashim
Increase buffer sizes at driver and tty level to accommodate kermit large packet support. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
2013-03-16usb/host/ehci: Add support for EHCI on spearVipin Kumar
Add EHCI support for spear boards Signed-off-by: Armando Visconti <armando.visconti@st.com> Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
2013-03-16usb: Fix bug when both DFU & ETHER are definedPantelis Antoniou
When both CONFIG_USB_GADGET & CONFIG_USB_ETHER are defined the makefile links objects twice. This patch uses a Makefile specific idiom of 'if defined(CONFIG_USB_GADGET) || defined(CONFIG_USB_ETHER)' to handle the case. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-03-16dfu: Add a partition type targetPantelis Antoniou
Dealing with raw block numbers with the dfu is very annoying. Introduce a partition method. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-03-16dfu: Properly zero out timeout valuePantelis Antoniou
Zero out timeout value; letting it filled with undefined values ends up with the dfu host hanging. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-03-16dfu: Fix crash when wrong number of arguments givenPantelis Antoniou
Fix obvious crash when not enough arguments are given to the dfu command. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-03-16dfu: Only perform DFU board_usb_init() for TRATSPantelis Antoniou
USB initialization shouldn't happen for all the boards. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-03-16usb: ehci: Add 64-bit controller supportVincent Palatin
On EHCI controller with 64-bit address space support, we must initialize properly the high word for the PCI bus master accesses. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-16usb: ehci: generic PCI supportVincent Palatin
Instead of hardcoding the PCI IDs on the USB controller, use the PCI class to detect them. Ensure the busmaster bit is properly set in the PCI configuration. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15Use 'unsigned int' for global_data's baudrateSimon Glass
We decided to used unsigned int here, rather than unsigned long. But for the generic global_data it is still unsigned long. So change it over. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15sparc: Fix build warnings in serial.cSimon Glass
These macros are already defined in io.h so should not be declared in serial.c. serial.c:38:0: warning: "READ_BYTE" redefined /home/sjg/c/src/third_party/u-boot/files/include/asm/io.h:36:0: note: this is the location of the previous definition serial.c:39:0: warning: "READ_HWORD" redefined /home/sjg/c/src/third_party/u-boot/files/include/asm/io.h:37:0: note: this is the location of the previous definition serial.c:40:0: warning: "READ_WORD" redefined /home/sjg/c/src/third_party/u-boot/files/include/asm/io.h:38:0: note: this is the location of the previous definition serial.c:41:0: warning: "READ_DWORD" redefined /home/sjg/c/src/third_party/u-boot/files/include/asm/io.h:39:0: note: this is the location of the previous definition Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15sparc: Fix out-of-tree buildingSimon Glass
It isn't clear why the sparc cpu Makefile has its own compile line, but it does not work correctly with an out-of-tree build. Removing it fixes this problem. Perhaps it does not introduce others. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15serial: ns16550: Remove unwanted castSimon Glass
This cast does not seem correct, since we should be writing to a pointer, not a ulong. This fixes the following warning on nds32: -ns16550.c:49: warning: passing argument 2 of 'writeb' makes pointer from integer without a cast Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15avr32: Fix cast warning in board.cSimon Glass
The frame buffer pointer in global_data is not a pointer, so we should remove these casts. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-03-15blackfin: Remove noreturn attribute from cpu_init_f()Simon Glass
Now that board_init_f() is not marked as noreturn, we need to do the same to blackfin's cpu_init_f() function. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15blackfin: Fix up board_type global dataSimon Glass
This should be in arch_global_data but was dropped in the change-over. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15exynos5: Enable generic board for Exynos5 device tree boardsSimon Glass
Enable CONFIG_SYS_GENERIC_BOARD for all Exynos5 boards that use CONFIG_OF_CONTROL. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15x86: Enable generic boardSimon Glass
This will be used exclusively on x86, so enable it for the whole architecture. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15tegra: Enable generic board for TegraSimon Glass
Bravely enable CONFIG_SYS_GENERIC_BOARD for all Tegra boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15x86: Enable generic board supportSimon Glass
This enables generic board support so that x86 boards can define CONFIG_SYS_GENERIC_BOARD. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15x86: Use sections header to obtain link symbolsSimon Glass
These are defined in asm-generic/sections.h, so remove them from architecture-specific files. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15x86: Adjust board_r.c for x86Simon Glass
For x86 the global_data is managed entirely by the start.S code so we do not need to touch it. However, we do have some more initcalls to add. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15x86: Adjust board_f.c for x86Simon Glass
For x86, things have adjusted somewhat since this series was originally written. It has its own way of running through initcalls which is actually nicer than others archs. Unfortunately this does introduce exceptions. We will soon require use of generic board on x86, but until then we need to fit in with what is there, and treat x86 as a special case. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15ppc: Enable generic board supportSimon Glass
This enables generic board support so that ppc boards can define CONFIG_SYS_GENERIC_BOARD. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15Adjust board_r.c for ppcSimon Glass
This adds ppc features to the generic post-relocation board init. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15Adjust board_f.c for ppcSimon Glass
This adds ppc features to the generic pre-relocation board init. This is a separate commit so that these features are clearly shown. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15Add CONFIG_SYS_SYM_OFFSETS to support offset symbolsSimon Glass
Link symbols as created by the link script can either be absolute or relative to the text start. This option switches between the two options so that we can support both. As we convert architectures over to generic board, we can see if this option is actually needed, or whether it is possible to unify this feature also. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15arm: Enable generic board supportSimon Glass
This enables generic board support so that ARM boards can define CONFIG_SYS_GENERIC_BOARD. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15arm: Remove use of board_early_init_r/last_stage_init()Simon Glass
These boards define CONFIG_LAST_STAGE_INIT and CONFIG_BOARD_EARLY_INIT_R but these options are not available on ARM. Move them into the powerpc common file instead. This change affects: km_kirkwood_pci, mgcoge3un, kmnusa, kmcoge5un, km_kirkwood and portl2. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15Add spl load featureSimon Glass
This adds secondary program loader support to the generic board. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15Introduce generic post-relocation board_r.cSimon Glass
This file handles common post-relocation init for boards which use the generic framework. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-04 02:28:46 +0000