summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-27cbfs: Rename the result variableSimon Glass
At present the result variable in the cbfs_priv is called 'result' as is the local variable in a few functions. Change the latter to 'ret' which is more common in U-Boot and avoids confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27cbfs: drop file_cbfs_result declarationChristian Gmeiner
It is not definded anywhere. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.gpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27x86: coreboot: add SMBIOS cbmem entry parsingChristian Gmeiner
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27x86: apl: Use devicetree for FSP-S configurationBernhard Messerklinger
A the moment the FSP-S configuration is a mix of hard coded values and devicetree properties. This patch makes FSP-S full configurable from devicetree by adding binding properties for all FSP-S parameters. Co-developed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> (Tested on coral) Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27x86: apl: Use devicetree for FSP-M configurationBernhard Messerklinger
A the moment the FSP-M configuration is a mix of hard coded values and devicetree properties. This patch makes FSP-M full configurable from devicetree by adding binding properties for all FSP-M parameters. Co-developed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> (Tested on coral) [sjg: Fix a build error for coral] Signed-off-by: Simon Glass <sjg@chromium.org> [bmeng: Add __maybe_unused to fsp_update_config_from_dtb()] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabledBernhard Messerklinger
Only load VBT if it's present in the u-boot.rom. Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> (Tested on coral) Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27x86: mtrr: Drop the mask display when changing an mtrrSimon Glass
We don't need to print this information since it is shown when the MTRRs are displayed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236Luka Kovacic
Convert the CRS305-1G-4S board to CRS3xx-98DX3236 to enable easier implementation of new CRS3xx series boards, based on Marvell Prestera 98DX3236. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr>
2020-05-27arm: mvebu: armada-3720-uDPU: fix PHY mode definition to sgmii-2500Jakov Petrina
Commit f49ac7e1c4 switched the default PHY speed to 3.125Gbit to resolve issues with SFP modules. However, U-Boot does not have a "2500base-x" phy-mode. Resolve this by using "sgmii-2500" instead. Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Stefan Roese <sr@denx.de>
2020-05-27arm: mvebu: ds414: define CONFIG_SYS_U_BOOT_OFFSEzra Buehler
Without CONFIG_SYS_U_BOOT_OFFS set to CONFIG_SYS_SPI_U_BOOT_OFFS, U-Boot will be located at address 0x16000. But, SPL will try to load the payload from 0x24000 causing the boot to hang. Signed-off-by: Ezra Buehler <ezra@easyb.ch> Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-27arm: mvebu: ds414: add u-boot,dm-pre-reloc to spi0Ezra Buehler
Without this U-Boot-specific property, booting on the Synology DS414 (or DS214+) fails in SPL. The spi0 DT node is not scanned, as a result the SPI flash cannot be found. Signed-off-by: Ezra Buehler <ezra@easyb.ch> Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-26Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- sifive: fix palmer's email address. - Move all SMP related SBI calls to SBI_v01.
2020-05-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-26sifive: fix palmer's email addressPragnesh Patel
Fix Palmer's email address Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-26riscv: Move all SMP related SBI calls to SBI_v01Atish Patra
SMP support for S-mode U-Boot is enabled only if SBI_V01 is enabled. There is no point in supporting SMP related (IPI and fences) SBI calls when SBI_V02 is enabled. Modify all the SMP related SBI calls to be defined only for SBI_V01. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-25Prepare v2020.07-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-25Merge tag 'ti-v2020.07-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Enable DM_ETH on omap3_logic board - Enable Caches in SPL for K3 platforms - Enable backup boot mode support for J721E - Update the DDR timings for AM654 EVM - Add automated tests for RX-51
2020-05-25Merge branch '2020-05-25-misc-fixes'Tom Rini
- A few minor Kconfig migrations / corrections - DFU doc fixes/improvements - Bugfix for ARMv8, env userspace building, more NULL checks in generic PHY code
2020-05-25sandbox: move compression option to KconfigMichael Walle
CONFIG_BZIP2 and CONFIG_GZIP_COMPRESSED are Kconfig options. Select them by CONFIG_SANDBOX instead of setting them in configs/sandbox.h. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25cmd: zip: fix implicit declaration warningMichael Walle
Fix the following warning: cmd/zip.c: In function ‘do_zip’: cmd/zip.c:30:6: warning: implicit declaration of function ‘gzip’; did you mean ‘do_zip’? [-Wimplicit-function-declaration] if (gzip((void *) dst, &dst_len, (void *) src, src_len) != 0) ^~~~ do_zip Include gzip.h header which declares the gzip() function. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25cmd: zip: automatically pull in gzip()Michael Walle
Move the CONFIG_GZIP_COMPRESSED from a config.h macro to a Kconfig menu item. It is not selectable by a user because there is no reason to do so. Instead it will be automatically selected by the stuff which uses gzip(), like the zip command. Remove it from the config_whitelist.txt. Also remove CONFIG_GZIP_COMPRESS_DEF_SZ as this was never used on any board. The default seems to be sane, otherwise it should be added as a Kconfig option. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25cmd: unzip: automatically select CONFIG_GZIPMichael Walle
unzip calls gzwrite() which is provided in lib/gunzip.c. Make sure it is automatically pulled in if the user selects CMD_UNZIP. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Heinrich Schuchardt <xypron.glkp@gmx.de>
2020-05-25env: Convert ENV_ACCESS_IGNORE_FORCE to KconfigMarek Vasut
Convert ENV_ACCESS_IGNORE_FORCE to Kconfig, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2020-05-25tools/env/fw_env.h: remove env.hRomain Naour
As reported by Nicolas Carrier on the Buildroot mailing list [1], there is a new build issue while building a program which interacts with the u-boot environment. This program uses the headers of the ubootenv library provided by uboot-tools. This is a recent change from uboot [2] adding "#include <env.h>" to fw_env.h. Adding env.h require a board configuration to build since it also include compiler.h (and others uboot internal includes). env.h include seems not needed since env_set() is not used in fw_env tool. Nicolas removed env.h from fw_env tool and fixed it's build issue. This problem is present since uboot v2019.10. [1] http://lists.busybox.net/pipermail/buildroot/2020-April/280307.html [2] https://gitlab.denx.de/u-boot/u-boot/-/commit/9fb625ce05539fe6876a59ce1dcadb76b33c6f6e Reported-by: Nicolas Carrier <nicolas.carrier@orolia.com> Signed-off-by: Romain Naour <romain.naour@gmail.com>
2020-05-25Convert CONFIG_CMD_MMC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMD_MMC Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-25phy: Fix possible NULL pointer deferenceVignesh Raghavendra
It is possible that users of generic_phy_*() APIs may pass a valid struct phy pointer but phy->dev can be NULL, leading to NULL pointer deference in phy_dev_ops(). So call generic_phy_valid() to verify that phy and phy->dev are both valid. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-05-25MAINTAINERS: add dfu.h and dfu.rst to DFUHeinrich Schuchardt
include/dfu.h and doc/api/dfu.rst belong to the device firmware update sub-system. So let's add them to DFU in MAINTAINERS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25doc: dfu: describe more DFU functionHeinrich Schuchardt
Add some of the missing DFU function descriptions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25doc: dfu: fix typos in README.dfuHeinrich Schuchardt
Fix some typos. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25doc: dfu: add DFU to HTML documentationHeinrich Schuchardt
Add the device firmware update functions to the generated HTML documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25doc: dfu: describe eMMC partition number parameterHeinrich Schuchardt
In dfu_alt_info for eMMC the eMMC partition number can be specified. The separator in dfu_alt_info is a semicolon not a comma. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25MAINTAINERS: add doc/driver-model/ to DRIVER MODELHeinrich Schuchardt
The documentation should rest with the same maintainer as the code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25armv8: cache_v8: fix mmu_set_region_dcache_behaviourPeng Fan
The enum dcache_optoion contains a shift left 2 bits in the armv8 case already. The PMD_ATTRINDX(option) macro will perform a left shift of 2 bits. Perform a right shift so that in the end we get the correct value. [trini: Reword the commit message] Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-22Merge git://git.denx.de/u-boot-usbTom Rini
- DM support for OMAP - DWC3 fix - Typo fix in eth/r8152
2020-05-22Merge branch 'net' of git://git.denx.de/u-boot-socfpgaTom Rini
- ks8851 cleanups and DM migration
2020-05-22net: ks8851: Add Kconfig entriesMarek Vasut
Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Add DM supportMarek Vasut
Add support for U-Boot DM and DT probing. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Receive one packet per recv callMarek Vasut
Instead of reading out the entire FIFO and possibly overwriting U-Boot memory, read out one packet per recv call, pass it to U-Boot network stack, and repeat. It is however necessary to cache RXFC value, because reading that one out clears it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Split non-DM specific bits from common codeMarek Vasut
Split network handling functions into non-DM specific parts and common code in preparation for conversion to DM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Pass around driver private dataMarek Vasut
Introduce a private data structure for this driver with embedded struct eth_device and pass it around. This prepares the driver to work with both DM and non-DM systems. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Checkpatch cleanupMarek Vasut
Fix various checkpatch complaints. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Clean up chip ID readoutMarek Vasut
There is only one chip ID in the table of chip IDs for this chip. Read out the chip ID instead and mask off the last "revision" bit to check the chip ID, this works for all chips in the family. Then drop the chip ID passing around. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Remove type_frame_headMarek Vasut
The packet status and length information should be extracted from the FIFO per-packet. Adjust the code such that it reads the packet meta data and then the packet afterward, if applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Trim down struct ks_netMarek Vasut
Most of the entries in the structure are useless, remove them. Inline the rest of uses where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Use 16bit RXQCR accessMarek Vasut
Per KS8851-16MLL, the RXQCR is a 16bit register. Use 16bit accessors to it consistently and drop the ks_wrreg8() function altogether, as it is not used anymore. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Remove RXQCR cacheMarek Vasut
The cached RXQCR value is never updated, remove the cache and just use the bits in the cache directly in the code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Replace malloc()+memset() with calloc()Marek Vasut
Replace combination of malloc()+memset() with calloc() as the behavior is exactly the same and the amount of code is reduced. Moreover, remove printf() in the fail path, as it is useless, and return proper -ENOMEM return code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22Merge tag 'u-boot-rockchip-20200522' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3288 chromebook veyron support; - Add pcie driver support for rk3399; - other fixes for rk3399 boards
2020-05-22Merge tag 'imx8qxp-fixes' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - Fix i.MX8QXP boot hang when getting CPU temperature
2020-05-22Merge tag 'efi-2020-07-rc3-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc3 (2) Problems fixed with these patches are: * UEFI sub-system not working with virtio block devices * Missing SATA support in UEFI sub-system * A superfluous debug statement
generated by cgit (git 2.34.1) at 2025-01-08 14:31:26 +0000