summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-04-10checkpatch.pl: update from Linux kernel v4.16Heinrich Schuchardt
Update scripts/checkpatch.pl from upstream. One of the many corrections is not creating an error for cover-letters. Reintroduce U-Boot's 5c761ce58666b3a1695697498598f8bf3484a0c7 checkpatch.pl: Add warning for new __packed additions Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-04-10fw_printenv: Fix crash due to incorrect size for malloc'ed string.Kristian Amlie
Using sizeof gives the size of the pointer only, not the string. This could easily lead to crashes when using -l argument. Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2018-04-10get_maintainer.pl: update from Linux kernel v4.16Heinrich Schuchardt
The most significant change is the addition of the --self-test option which allows to run a consistency check on all MAINTAINERS files. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-04-10MAINTAINERS: ARM STM STM32MP: correct file pathsHeinrich Schuchardt
Provide correct file paths. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-10clk: add sandbox test for bulk APINeil Armstrong
This patch adds the bulk clock API tests for the sandbox test suite. It's very similar to the main test but only uses the _bulk() API and checks if the clocks are correctly enabled/disabled. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10clk: Add get/enable/disable/release for a bulk of clocksNeil Armstrong
This patch adds a "bulk" API to the clock API in order to get/enable/disable /release a group of clocks associated with a device. This bulk API will avoid adding a copy of the same code to manage a group of clocks in drivers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10reset: add sandbox test for bulk APINeil Armstrong
This patch adds the bulk reset API tests for the sandbox test suite. Unlike the main test, it also check the "other" reset signal using the bulk API and checks if the resets are correctly asserted/deasserted. To allow the bulk API to work, and avoid changing the DT, the number of resets of the sandbox reset controller has been bumped to 101 for the "other" reset line to be valid. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10reset: Add get/assert/deassert/release for bulk of reset signalsNeil Armstrong
This patch adds a "bulk" API to the reset API in order to get/deassert/ assert/release a group of reset signals associated with a device. This bulk API will avoid adding a copy of the same code to manage a group of reset signals in drivers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10log: Add units to code-size stats in README.logSimon Glass
Without the units these numbers are confusing. Add a comment about the unit being 'bytes' and mention 'buildman' as the source. Suggested-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-04-10log: Correct missing free() on error in log_add_filter()Simon Glass
If there is a problem with the parameters to log_add_filter(), the memory allocated is currently not freed. Fix this. Reported-by: Coverity (CID: 171962) Signed-off-by: Simon Glass <sjg@chromium.org>
2018-04-10mkimage: do not fail if there is no print_header functionGuillaume GARDET
Commit 253c60a breaks the exit value of 'mkimage -T rkimage' and print the following error: mkimage: Can't print header for Rockchip Boot Image support: Success It is not a failure to not print headers, so just display the warning message, and finish the function properly. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-10armv7m: disable icache before linux bootingPatrice Chotard
Similarly to ARMV7, on ARMV7M instruction cache memory needs to be disabled before running linux kernel to avoid kernel to be stuck. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-10serial: meson: Update compatible with new Linux bindingsNeil Armstrong
The Amlogic Meson SoCs serial bindings were not written when serial support was pushed into Linux and U-Boot. A clean bindings document has been merged into Linux tree to correctly handle the multiple clocks feeding the serial peripheral. This update the U-Boot serial_meson driver with the new compatible string for Amlogic Meson GX Socs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10reset: Add Amlogic Meson Reset ControllerNeil Armstrong
The Amlogic Meson SoCs embeds up to 256 reset lines, add the corresponding driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-10sysreset: syscon: convert to use live dtÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-04-09Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2018.05-rc2 - Various DT changes and sync with mainline kernel - Various defconfig updates - Add SPL init for zcu102 revA - Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX and zc1751-dc3 - Net fixes - xlnx,phy-type - 64bit axi ethernet support - arasan: Fix nand write issue - fpga fixes - Maintainer file updates
2018-04-09Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-04-09 Highlights this time around: - Lots of minor spec compliance fixes - Support full range of GOP BLT commands - More fine grained error checking - Network fixes (init, DP) - Lots of other bug fixes...
2018-04-09arm64: zynqmp: Add support for Xilinx zcu111-revAMichal Simek
Xilinx zcu111 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add support for Xilinx zcu106-revAMichal Simek
Xilinx zcu106 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add support for zcu104 customer boardMichal Simek
Xilinx zcu104 is another customer board. It is sort of zcu102 clone with some differences. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add support for zc12xx boardsMichal Simek
Add support for zc12xx boards. All of them are internal boards for silicon validation and share very similar base platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add support for zc1751 dc3Michal Simek
zc1751 is based board with dc3 extenstion card which is used for silicon validation. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add support for zcu100 aka Ultra96 boardMichal Simek
Add support for Xilinx zcu100. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Get 200MHz clock early for MMCMichal Simek
SPL MMC boot requires to have clock early. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Remove pinctrl settingsMichal Simek
This part hasn't been pushed to mainline yet that's why remove it. The patch can be reverted in future when this is pushed there. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2018-04-09arm64: zynqmp: Remove power domain descriptionMichal Simek
This part hasn't been pushed to mainline yet that's why remove it. The patch can be reverted in future when this is pushed there. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2018-04-09arm64: zynqmp: Add low level initialization for zc1751Michal Simek
Add psu init for zc1751 dc cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add low level initialization for zcu102-revAMichal Simek
Add psu init for zcu102-revA. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Enable Fixed link supportMichal Simek
This patch enables the fixed link support for all ZynqMP boards. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Enable mac address randomization for zc1751 dc5Michal Simek
There is no memory which stores mac address that's why generate it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Enable ethernet phys for zc1751 dc5Michal Simek
Enable ethernet phys for zc1751 dc5. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Enable booting to ATFLuca Ceresoli
U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which pass control to full u-boot(EL2). This has been tested on zcu106, so enable it in this defconfig. To generate an image that triggers this booting flow, you need to pass '-O arm-trusted-firmware' to mkimage. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Enable pxe and dhcp if commands are enabledMichal Simek
Targets without net can't use pxe or dhcp boot methods. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09net: phy: xilinx_phy: Read phytype using property xlnx,phy-typeSiva Durga Prasad Paladugu
This patch reads phytype from property "xlnx,phy-type" instead od simply looking for "phy-type". This is to be inline with Linux and also fixes the issue of detecting it wrongly in u-boot. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09axi: ethernet: Added support for 64 bit addressing for axi-ethernetVipul Kumar
This patch uses writeq() function to enable greater than 32 bit addressing of axi-ethernet for the ZynqMP devices. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09nand: arasan_nfc: Fixed NAND write issueVipul Kumar
In commit 2453c695185f ("arm64: zynqmp: nand: Fixed NAND erase issue for size 1GiB or more"), ARASAN_NAND_MEM_ADDR1_PAGE_MASK macro changed to 0xFFFF and the same macro is used in nand write and so that getting nand write error. This patch reverted this macro to the 0xFFFF0000 and used ARASAN_NAND_MEM_ADDR1_COL_MASK in the nand erase function which is equal to 0xFFFF. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09fpga: zynq: Add delay after PCFG_PROG_B changeSiva Durga Prasad Paladugu
There is delay needed after PCFG_PROGB change if AES key source is efuse. This fixes the issue of encrypted bitstream loading with AES efuse as key source. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09fpga: zynqmp: Fix the nonsecure bitstream loading issueSiva Durga Prasad Paladugu
Xilfpga library expects the size of bitstream in a pointer but currenly we are passing the size as a value. This patch fixes this issue. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Nava kishore Manne <navam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09fpga: zynqmp: Update zynqmp_load() as per latest xilfpgaSiva Durga Prasad Paladugu
Latest xilfpga expects to set BIT5 of flags for nonsecure bitsream and also expects length in bytes instead of words This patch does the same. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09fpga: zynqmp: Add support to get the PCAP status for fpga info commandNitin Jain
This patch adds support for ZynqMP platform to print FPGA PCAP status for "fpga status" command. Signed-off-by: Nitin Jain <nitinj@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09clk: zynqmp: Add new compatible string for clock driverMichal Simek
New and old clk drivers are sharing IDs and descriptions. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm: zynq: Use fixed partitions for spi flash for zc770 xm010Michal Simek
Sync with mainline. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm: zynq: Fix eeprom dt nodesMichal Simek
- Use eeprom for node name - Use atmel compatible string instead of at. - Add missing labels Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09ARM: dts: zynq: Add generic compatible string for I2C EEPROMJavier Martinez Canillas
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm: zynq: Use i2c-mux instead of i2cswitch for pca9548Michal Simek
i2c muxes should described like this. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm: zynq: Sync up licenses with mainline kernelMichal Simek
Use different location for SPDX line. Also update dates for new mainline DTS files. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm: zynq: Remove 0x prefixes from cc108Michal Simek
The patch fixing issues reported by DTC: zynq-cc108.dtb: Warning (unit_address_format): Node /amba/spi@e000d000/flash@0/partition@0x400000 unit name should not have leading "0x" zynq-cc108.dtb: Warning (unit_address_format): Node /amba/spi@e000d000/flash@0/partition@0x800000 unit name should not have leading "0x" zynq-cc108.dtb: Warning (unit_address_format): Node /amba/spi@e000d000/flash@0/partition@0xc00000 unit name should not have leading "0x" zynq-cc108.dtb: Warning (unit_address_format): Node /amba/spi@e000d000/flash@0/partition@0xd00000 unit name should not have leading "0x" zynq-cc108.dtb: Warning (unit_address_format): Node /amba/spi@e000d000/flash@0/partition@0xf00000 unit name should not have leading "0x" Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Remove double spaces from dts fileMichal Simek
There is no reason to have double spaces for indentation. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add silabs prefix to u69 for zcu102Michal Simek
Add vendor prefix to si5341. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Remove number from clock-generator node nameMichal Simek
There shouldn't be a number appended based on spec. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-02-05 06:53:36 +0000