summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-11From: eran liberty <eran.liberty@gmail.com>Andy Fleming
adds the reset register to 85xx immap Signed-off-by: Eran Liberty <eran.liberty@gmail.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-07-11Polished the 85xx ADS config filesAndy Fleming
Made the boot commands use device trees by default. Also moved the ramdisk to 1000000 (I think the previous address was getting overridden during boot). Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-07-118544ds: Fix Makefile after moving pixis to board/freescale.Ed Swarthout
The OBJTREE != SRCTREE build scenario was broken. This fixes it. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-11tsec: Fix PHY code to match first driverAndy Fleming
Jarrold Wen noticed that the generic PHY code always matches under the current implementation. Change it so the first match wins, and *only* unknown PHYs trigger the generic driver Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-07-11Add support for CPM device tree configuration to 8560 ADSAndy Fleming
* Adds code to modify CPM frequencies * Cleans up the config file to #define TSEC and (for now) #undef FCC * Adds the MII command for all 8560 ADS configurations * Updates config file to provide convenience commands for booting with a device tree Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-07-11Fix Marvell 88e1145 PHY init codeAndy Fleming
Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver where the reset was being done after the errata code instead of before. Signed-off-by: Haiying Wang <haiying.wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-07-11Merge git://www.denx.de/git/u-bootKim Phillips
2007-07-11Add simple agent/end-point configuration in PCI AutoConfig for ↵Ed Swarthout
PCI_CLASS_PROCESSOR_POWERPC. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2007-07-11pciauto setup bridgeEd Swarthout
The P2P bridge bus numbers programmed into the device are relative to hose->first_busno. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2007-07-11Support PCIe extended config registersEd Swarthout
FSL PCIe block has extended cfg registers in the 100 and 400 range. For example, to read the LTSSM register: pci display <busn>.0 404 1 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2007-07-11Minor improvements to drivers/pci_auto.cEd Swarthout
- Make pciauto_{pre,post}scan_setup_bridge non-static - Added physical address display in debug messages. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2007-07-11Start pci hose scan from hose->current_busno.Ed Swarthout
Ensure hose->current_busno is not less than first_busno. This fixes broken board code which leaves current_busno=0 when first_busno is greater than 0 for the cases with multiple controllers. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2007-07-11Fix some compile problems introduced by the latest CFG_CMD_xxx cleanupStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-11CM1.QP1: Support for the Schindler CM1.QP1 board.Bartlomiej Sieka
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-07-11[PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failedHeiko Schocher
- now the Flash ST M29W040B is supported (not tested) - fix the "led" command - fix compile error, if BUILD_DIR is used Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-11Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-07-11Fix malloc problem introduced with the relocation fixup for the PPC platformStefan Roese
The relocation fixup didn't handle the malloc pointer initialization correctly. This patch fixes this problem. Tested successfully on 4xx. The relocation fixup patches for 4xx will follow soon. Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-10Merge branch 'master' into u-boot-5329-earlyJohn Rigby
2007-07-10Cache update and added CFG_UNIFY_CACHETsiChung
Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only. Signed-off-by: TsiChung <tcliew@Goku.(none)>
2007-07-10Update header file. Include dtimer_intr_setup(). Changed timer divider to ↵TsiChungLiew
global define. Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Update header filesTsiChungLiew
Include immap.h and renamed mcfrtc.h to rtc.h Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Add mcffec_initialize()TsiChungLiew
Added mcffec_initialize() in eth_initialize() Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Update header file and clean upTsiChungLiew
Include immap.h Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10New uart structure and definesTsiChungLiew
Seperated from mcfuart.h Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10New timer structure and definesTsiChungLiew
Seperated from mcftimer.h Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Rename mcfrtc to rtcTsiChungLiew
Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Rename mcfserial.c. Update include headerTsiChungLiew
Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Header file update, clean up and cache handlingTsiChungLiew
Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid. Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Create interrupts.c and modify MakefileTsiChungLiew
interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Enable IcacheTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Update header file and some clean upTsiChungLiew
Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces. Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Update header file and enable icacheTsiChungLiew
Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r(). Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Update header file and removed interrupt_init()TsiChungLiew
Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Update for flash.o and mii.oTsiChungLiew
Removed flash.o and added mii.o Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10MII functions calls.TsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.TsiChungLiew
The removed MII routines will be placed in mii.c. Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Duplicate codeTsiChungLiew
There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file. Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Seperate old structure defines and new structure definesTsiChungLiew
Removed new uart structure and defines to uart.h Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Seperate old structure defines and new structure definesTsiChungLiew
New timer structure and defines will move to new timer.h Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Clean upTsiChungLiew
Removed whitespace Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Clean upTsiChungLiew
Replaced whitespace with tabs Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Create new header file and move peripherals base address from configs file ↵TsiChungLiew
to new header file. Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h. Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10Revert file modeTsiChungLiew
Changed MAKEALL file mode to executable, removed executable file mode from Makefile Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10drivers/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10fs/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10net/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10common/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
generated by cgit (git 2.34.1) at 2025-02-08 20:41:40 +0000