summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-14xen: Port Xen grant table driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14xen: Port Xen bus driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot and strip test code. Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-14lib: sscanf: add sscanf implementationAndrii Anisov
Port sscanf implementation from mini-os and introduce new Kconfig option to enable it: CONFIG_SSCANF. Disable by default. Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-14linux/compat.h: Add wait_event_timeout macroOleksandr Andrushchenko
Add wait_event_timeout - sleep until a condition gets true or a timeout elapses. This is a stripped version of the same from Linux kernel with the following u-boot specific modifications: - no wait queues supported - use u-boot timer to detect timeouts - check for Ctrl-C pressed during wait Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> [trini: Drop atomic_read from gadget/ether.c as this has existed for a while and now causes problems] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-14serial: serial_xen: Add Xen PV serial driverPeng Fan
Add support for Xen para-virtualized serial driver. This driver fully supports serial console for the virtual machine. Please note that as the driver is initialized late, so no banner nor memory size is visible. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14xen: Port Xen event channel driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot. Strip functionality not needed by U-boot. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14xen: Port Xen hypervisor related code from mini-osOleksandr Andrushchenko
Port hypervisor related code from Mini-OS. This is referencing the code of Mini-OS from [1] by Huang Shijie and Volodymyr Babchuk which is for ARM64. Update essential arch code to support required bit operations, memory barriers etc. Copyright for the bits ported belong to at least the following authors, please see related files for details: Copyright (c) 2002-2003, K A Fraser Copyright (c) 2005, Grzegorz Milos, gm281@cam.ac.uk,Intel Research Cambridge Copyright (c) 2014, Karim Allah Ahmed <karim.allah.ahmed@gmail.com> [1] - https://github.com/zyzii/mini-os.git Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> [trini: Drop wmb() from musb-net/linux-compat.h now] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-14board: Introduce xenguest_arm64 boardAndrii Anisov
Introduce a minimal Xen guest board running as a virtual machine under Xen Project's hypervisor [1], [2]. Part of the code is ported from Xen mini-os and also uses work initially done by different authors from NXP: please see relevant files for their copyrights. [1] https://xenbits.xen.org [2] https://wiki.xenproject.org/ Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14xen: Add essential and required interface headersOleksandr Andrushchenko
Add essential and required Xen interface headers only taken from the stable Linux kernel stable/linux-5.7.y at commit 66dfe4522160 Linux 5.7.5. These are better suited for U-boot than the original headers from Xen as they are the stripped versions of the same. At the same time use public protocols from Xen RELEASE-4.13.1, at commit 6278553325a9 update Xen version to 4.13.1 as those have more comments in them. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-08-14Kconfig: Introduce CONFIG_XENPeng Fan
Introduce CONFIG_XEN to make U-Boot could be used as bootloader for a virtual machine. Without bootloader, we could successfully boot up android on XEN, but we need need bootloader to support A/B, dm verify and etc. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14Add MIT LicenseAnastasiia Lukianenko
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14configs: evb-ast2500: Convert to OF_SEPARATEChia-Wei, Wang
Switch DTB provider form OF_EMBED to OF_SEPARATE to avoid the compile warning message: ==================== WARNING ====================== CONFIG_OF_EMBED is enabled. This option should only be used for debugging purposes. Please use CONFIG_OF_SEPARATE for boards in mainline. See doc/README.fdt-control for more info. ==================================================== Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-14configs: evb-ast2500: Move BOOTCOMMAND from header to defconfigChia-Wei, Wang
Move the BOOTCOMMAND definition from the board inclusion header to the default configuration file. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-14include/configs: aspeed: Remove hardcoded variablesChia-Wei, Wang
The hardcoded platform variables such as DRAM base address are not common to Aspeed SoCs AST24xx/AST25xx/AST26xx. This patch replaces those hardcoded with macros defined in a newly added header, where the basic SoC HW information are assigned accordingly. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-14cosmetic: aspeed: ast2500: Rename board fileChia-Wei, Wang
Rename the ast2500-board.c to board_common.c and place the renamed file under the ast2500 folder. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-14aspeed: ast2500: Add lowlevel_init assemblyChia-Wei, Wang
The original lowlevel_init function of AST2500 is written in C. However, the C runtime environment is not ready until _main execution. This patch adds the assembly version of the lowlevel_init function. Additional initialization to DRAM configuration and LPC reset source are also added. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-14MAINTAINERS: Add maintainers for Aspeed SoCsChia-Wei, Wang
Update maintainers for Aspeed SoC platforms. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-14drivers: pcie: add Broadcom IPROC PCIe RC driverSrinath Mannam
Add support for IPROC PAXC PCIe RC driver. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14drivers: pci: add api to get dma regionsRayagonda Kokatanur
Add api to get dma regions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
2020-08-14Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Fix HiFive Unleashed the broken problem by call fix_fdt() before reserve_fdt(). Please refer to https://www.mail-archive.com/u-boot@lists.denx.de/msg379444.html for master u-boot broken for HiFive Unleashed. - Add unaligned exception cmd. - Refine sifive/fu540 spl flow. - Add additional crash information for efi. - Update sipeed/maix doc. - Two minor refine.
2020-08-14common/board_f: make sure to call fix_fdt() before reserve_fdt()Pragnesh Patel
There may be a chance that board specific fix_fdt() will change the size of FDT blob so it's safe to call reserve_fdt() after fix_fdt() otherwise global data (gd) will overwrite with FDT blob values. Fixes: a8492e25ac71 ("riscv: Expand the DT size before copy reserved memory node") Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-08-14riscv: additional crash informationHeinrich Schuchardt
If an exception occurs, the relocated program counter and return address are required for an analysis. With this patch you get: => exception undefined Unhandled exception: Illegal instruction EPC: 0000000080595908 RA: 000000008059c0c6 TVAL: 000000008030c01e EPC: 0000000080007908 RA: 000000008000e0c6 reloc adjusted We can use the relocated addresses to find the involved functions in u.boot.map: .text.do_undefined 0x0000000080007908 0x8 cmd/built-in.o .text.cmd_process 0x000000008000dfcc 0x11a common/built-in.o 0x000000008000dfcc cmd_process If an exception occurs in an UEFI binary additionally the load addresses of the UEFI binaries are needed. With this patch: => setenv efi_selftest exception => bootefi selftest Unhandled exception: Illegal instruction EPC: 000000008042e18a RA: 000000008042e18a TVAL: 000000008030c01e EPC: 000000007fea018a RA: 000000007fea018a reloc adjusted UEFI image [0x0000000000000000:0xffffffffffffffff] '/\selftest' UEFI image [0x000000008042e000:0x000000008042e43f] pc=0x18a '/bug.efi' The value pc=0x18a matches the position of the illegal instruction in efi_selftest_miniapp_exception.efi (loaded as /bug.efi); asm volatile (".word 0xffffffff\n"); 00000180 93 85 C5 11 1C 64 22 85 82 97 FF FF FF FF 1C 64 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com> Tested-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-08-14cmd: exception: unaligned data access on RISC-VHeinrich Schuchardt
The command 'exception' can be used to test the handling of exceptions. Currently the exception command only allows to create an illegal instruction exception on RISC-V. Provide a sub-command 'exception unaligned' to cause a misaligned load address exception. Adjust the online help for 'exception undefined'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Rick Chen <rick@andestech.com>
2020-08-14doc: riscv: debug UART for MAIXHeinrich Schuchardt
Provide the required settings for the debug UART. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-08-14doc: riscv: Update documentation for Sipeed MAIX boardsHeinrich Schuchardt
The MAIXDUINO runs fine with the sipeed_maix_bitm_defconfig but a different board id parameter should be passed to kflash. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-08-14riscv: sifive: fu540: redundant initializationHeinrich Schuchardt
We should not initialize a variable if the value is overwritten before being read. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-08-14riscv: remove redundant logical constraint.Heinrich Schuchardt
After if (ret) return ret; we know that ret is zero. Don't check it again. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-08-14riscv: sifive/fu540: Move SPL related functions to spl.cBin Meng
It's better to keep all SPL related functions in the same spl.c. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Leo Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14riscv: sifive/fu540: Drop NET_RANDOM_ETHADDRBin Meng
This option was enabled during the earlier U-Boot porting time. Now we already have the OTP driver in place and the unique MAC address is read from the OTP, there is no need to turn on this option. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Leo Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14riscv: sifive/fu540: kconfig: Move FU540 driver related options to the SoC levelBin Meng
All FU540 driver related options should be in the SoC level Kconfig. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14riscv: sifive/fu540: spl: Rename soc_spl_init()Bin Meng
spl_soc_init() seems to be a better name, as all SPL functions names start from the spl_ prefix. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14riscv: sifive/fu540: spl: Drop our own version of board_init_f()Bin Meng
Use the generic board_init_f() provided by the RISC-V library codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14riscv: Call spl_board_init_f() in the generic SPL board_init_f()Bin Meng
The generic SPL version of board_init_f() should give a call to board specific codes to initialize board in the SPL phase. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-13Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Fix dtc warnings for some MVEBU boards
2020-08-13Merge tag 'u-boot-stm32-20200813' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Use IS_ENABLED to prevent ifdef in board_key_check for STM32MP - Add STM32 FMC2 EBI controller driver - Fix dwc3-sti-glue which allows STiH410-B2260 to boot again - Add fitImage its entry for 587-200 DHCOR SoM - Add both PDK2 and DRC02 DT into DHCOM fitImage its - Fix DHCOM KS8851 ethernet MAC address - Remove stm32mp1 board.c file - Use const for struct node_info in board stm32mp1.c file
2020-08-13arm: mvebu: armada-3720-turris-mox.dts: Fix dtc warningStefan Roese
Fix this dtc warning: Warning (avoid_default_addr_size) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Behún <marek.behun@nic.cz>
2020-08-13arm: mvebu: armada-388-gp.dts: Fix dtc warningsStefan Roese
Fix these dtc warnings: Warning (reg_format) Warning (avoid_default_addr_size) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chris Packham <judge.packham@gmail.com> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2020-08-13arm: mvebu: armada-xp-maxbcm.dts: Fix dtc warningStefan Roese
Fix this dtc warning: Warning (avoid_default_addr_size) Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-13arm: mvebu: armada-xp-theadorable.dts: Fix dtc warningStefan Roese
Fix this dtc warning: Warning (avoid_default_addr_size) Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-13board: stm32mp1: use const for struct node_infoPatrick Delaunay
Use const for the variable nodes in ft_board_setup, this patch follow fdt_fixup_mtdparts prototype and no more use stack. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: remove board.cPatrick Delaunay
Remove the file board/st/stm32mp1/board.c which is not more compiled since commit 156732cc8939 ("board: stm32mp1: move the function board_debug_uart_init in spl.c") Fixes: 4fb46816c7e2 ("board: stm32mp1: move the function board_debug_uart_init in spl.c") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13ARM: dts: stm32: Update eth1addr from EEPROM if eth1 presentMarek Vasut
The STM32MP1 DHCOM has two ethernet interfaces, the on-SoM DWMAC and KS8851. Set eth1addr for the KS8851 to a MAC address of the DWMAC incremented by 1. The MAC of the DWMAC is set from on-SoM EEPROM already, but the MAC address of KS8851 was left uninitialized, so fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoMMarek Vasut
The new 587-200 DHCOR SoM is compatible with the 587-100 prototype, hence just replicate the entries, as there is no pattern matching. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13ARM: stm32: Add both PDK2 and DRC02 DT into DHCOM fitImage itsMarek Vasut
Include both PDK2 and DRC02 DTs in the DHCOM fitImage .its and implement support in SPL to select the correct configuration entry for U-Boot by using the machine compatible string from SPL DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13ARM: dts: stm32: add FMC2 EBI support for stm32mp157cChristophe Kerello
This patch adds FMC2 External Bus Interface support on stm32mp157c. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13configs: stm32mp: add CONFIG_STM32_FMC2_EBIChristophe Kerello
This patch enables the support of FMC2 EBI. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: update fdt fixup partitions tableChristophe Kerello
This patch adds "st,stm32mp1-fmc2-nfc" compatible string in the fdt fixup partitions table. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: get resources from parent nodeChristophe Kerello
FMC2 EBI support has been added. Common resources (registers base address and clock) can now be shared between the 2 drivers using "st,stm32mp1-fmc2-nfc" compatible string. It means that the common resources should now be found in the parent device when EBI node is available. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driverChristophe Kerello
The driver adds the support for the STMicroelectronics FMC2 EBI controller found on STM32MP SOCs. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13mtd: rawnand: stm32_fmc2: use clrsetbits_le32Christophe Kerello
This patch uses clrsetbits_le32 function instead of multiple instructions. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2024-12-23 23:30:34 +0000