summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-04Merge tag 'mmc-2019-5-3' of https://github.com/MrVan/u-bootTom Rini
2019-05-04Merge branch '2019-05-04-master-imports'Tom Rini
- Remove dead code from davinci - Migrate CONFIG_SUPPORT_EMMC_BOOT
2019-05-04delete Kbuild "select" of long-dead SPL_DISABLE_OF_CONTROLRobert P. J. Day
>From way back in 2015: commit dffb86e468c8e02ba77283989aefef214d904dc5 Author: Masahiro Yamada <yamada.masahiro@socionext.com> Date: Wed Aug 12 07:31:54 2015 +0900 of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL As we discussed a couple of times, negative CONFIG options make our life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ... and here is another one. Now, there are three boards enabling OF_CONTROL on SPL: - socfpga_arria5_defconfig - socfpga_cyclone5_defconfig - socfpga_socrates_defconfig This commit adds CONFIG_SPL_OF_CONTROL for them and deletes CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert the logic. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-04Convert CONFIG_SUPPORT_EMMC_BOOT to KconfigAlex Kiernan
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-04arm: davinci: remove leftover code for dm* SoCsBartosz Golaszewski
The support for DaVinci DM* SoCs has been dropped a while ago. There's still a lot of leftover code in mach-davinci though. Entirely remove certain files and modify the common code to no longer reference unsupported chips. Note: all DaVinci platforms supported in u-boot now define SOC_DA8XX but not all define SOC_DA850 (e.g. omapl138). We can safely remove all ifdefs for the former, but let's leave the ones for the latter. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-04usb: musb_hcd: remove unnecessary ifdefs for dm* SoCsBartosz Golaszewski
The support for DaVinci DM* SoCs has been dropped. The ifdefs in the musb_hcd driver are no longer needed. Remove them. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Marek Vasut <marex@denx.de>
2019-05-04nand: davinci: remove dead code for dm644xBartosz Golaszewski
The support for DaVinci DM* SoCs has been dropped. The code that used to be relevant to dm644x is no longer needed. Remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-04arm: davinci: remove dead code for PHYs used by DaVinci DM* boardsBartosz Golaszewski
The support for DaVinci DM* boards has been dropped a while ago. The code for all those PHYs is no longer used and they have their own proper PHY drivers in drivers/net/phy anyway. Remove all dead code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-04net: davinci_emac: drop support for unused PHYsBartosz Golaszewski
The boards with SoCs from the DaVinci DM* family used to come with different PHYs that needed special support implemented in mach-davinci. Since the support for these chips has long been removed, we can now drop this unnused code from the emac driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-03Merge git://git.denx.de/u-boot-socfpgaTom Rini
- Misc MMC, FPGA bridge, general SoCFPGA fixes
2019-05-03Merge git://git.denx.de/u-boot-usbTom Rini
- DaVinci updates
2019-05-03Merge git://git.denx.de/u-boot-marvellTom Rini
- Fix in kwbimage (return code checking) (Young Xiao) - Misc updates to Turris Omnia (Marek)
2019-05-03ARM: davinci: Remove unused functions from headerAdam Ford
There are a few functions defined in the header file, but they are not referenced by any Davinci code. In order to make a general function in the future with static function declarations, this patch will remove the references all together. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-03usb: ohci: Re-enable commented out delayAdam Ford
There is a delay function that was commented out. This patch re-enables it, because it will be needed for da850 ohci support. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-03mmc: sdhci: Add Support for ADMA2Faiz Abbas
The Standard Host Controller Interface (SDHCI) specification version 3.00 adds support for Advanced DMA (ADMA) for both 64 and 32 bit widths of DMA. ADMA2 uses a table of descriptors for aggregating DMA requests. This significantly improves read and write throughput. Add Support for the same. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-05-03mmc: sdhci: Move DMA handling to prepare_dma() functionFaiz Abbas
In preparation for addition of ADMA2 support, cleanup SDMA handling by moving it to a new sdhci_prepare_dma() function. Also add a flags field in sdhci_host to indicate if DMA is enabled. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-05-03mmc: fsl_esdhc: Fix wp_enable issueYe Li
The wp-gpios property is used for gpio, if this is set, the WP pin is muxed to gpio function, can't be used as internal WP checking. However the codes remain to use internal WP checking. This patch changes to examine the "fsl,wp-controller" for enabling internal WP checking, and "wp-gpios" for muxing to gpio. Signed-off-by: Ye Li <ye.li@nxp.com>
2019-05-03mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issueYe Li
When sd/mmc work at DDR mode, like HS400/HS400ES/DDR52/DDR50 mode, the output clock rate is half of the internal clock rate. This patch set the DDR_EN bit first for DDR mode, hardware divide the usdhc clock automatically, then follow the original sdr clock setting method. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
2019-05-03Merge branch '2019-05-03-master-imports'Tom Rini
- Various btrfs fixes - Various TI platform fixes - Other fixes (cross build, taurus update, Kconfig help text)
2019-05-03fs: btrfs: fix btrfs methods return values on failureMarek Behún
The btrfs implementation methods .ls(), .size() and .read() returns 1 on failure, but the command handlers expect values <0 on failure. For example if given a nonexistent path, the load command currently returns success, and hush scripting does not work. Fix this by setting return values of these methods to -1 instead of 1 on failure. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-03tools/Makefile: fix HOSTCFLAGS with CROSS_BUILD_TOOLSFabrice Fontaine
When CROSS_BUILD_TOOLS is set, set HOSTCFLAGS to CFLAGS otherwise CC will be used with HOSTCFLAGS which seems wrong Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
2019-05-03ARM: dts: logicpd-som-lv: Fix MMC1 card detectAdam Ford
The card detect pin was incorrectly using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW when reading the state of the CD pin. Without this patch, MMC1 won't be detected. This is the same patch submitted to linux-omap, but I was hoping to get it applied to U-Boot without having to wait for the linux adoption and then backporting. Fixes: 5448ff33f281 ("ARM: DTS: Resync Logic PD SOM-LV 37xx devkit with Linux 4.18-RC4") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-03README: davinci: update the documentation for DaVinciBartosz Golaszewski
The DM* family of SOCs is no longer supported. We now support the omap-l138 lcdk board and Lego EV3 platform. Reflect those changes in the README. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com>
2019-05-03ti: Add am335x-pocketbeagle to am335x_evm_defconfig.Vagrant Cascadian
Add am335x-pocketbeagle to CONFIG_OF_LIST in am335x_evm_defconfig. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-05-03ti: Add device-tree for am335x-pocketbeagle.Vagrant Cascadian
Add device-tree files from linux 5.1-rc7 needed to complete support for PocketBeagle. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-05-03arm: dts: k3-am654: Sync IOPAD macros with LinuxAndreas Dannenberg
Transition to the IOPAD macros as used in Linux in which the pin mux mode is specified using a dedicated parameter while also dropping the related MUX_MODEx macros that are no longer needed. This transition will allow us to keep both Linux and U-Boot DTS in sync more easily. While at it also align the file name of the include file itself and update any references accordingly. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-03at91: cleanup taurus portHeiko Schocher
- at91sam9g20-taurus.dts: use labels - cleanup taurus port to compile clean with current mainline again. SPL has no serial output anymore, so it fits into SRAM. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-05-03firmware: ti_sci: Always request response from firmwareAndrew F. Davis
TI-SCI firmware will only respond to messages when the TI_SCI_FLAG_REQ_ACK_ON_PROCESSED flag is set. Most messages already do this, set this for the ones that do not. Signed-off-by: Andrew F. Davis <afd@ti.com> Tested-by: Alejandro Hernandez <ajhernandez@ti.com> Acked-by: Nishanth Menon <nm@ti.com>
2019-05-03lib: Kconfig: fix help text for GZIPHeiko Schocher
commit 95f4bbd581cf ("lib: fdt: Allow LZO and GZIP DT compression in U-Boot") introduced Kconfig option for gzip in U-Boot, but help text says gzip for SPL, which is wrong. Fix this. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2019-05-03lib/vsprintf: remove #include <uuid.h> from vsprintf.cHeinrich Schuchardt
common.h already includes uuid.h Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-03fs: btrfs: Do not print mount fail message when not btrfs filesystemMarek Behún
Other filesystem drivers don't do this. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-03fs: correct comments for fs_read() and write()Heinrich Schuchardt
The existing comments where confusing read and write. The comment for fs_write() had: "@addr: The address to read into" So let's rework the comments and format them in Sphinx style. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-03armv7R: dts: k3: am654: Switch DMSC TX message thread IDAndreas Dannenberg
Switch from using the high priority DMSC transmit message queue used by the secure R5 MCU island boot context to the low priority message queue. While the change in priority is irrelevant for the current boot architecture it however gives us access to a deeper message queue that will allow us to buffer more messages. This is an important aspect when sending several messages without requesting and waiting for a response in a row which is a communication scheme used during core shutdown for example. See AM654 TISCI User Guide for additional details. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-03board: am335x: Drop duplicate pinmux configurationPaul Barker
In commit ad6054f1fe128f797b6eb2964afca6674b584785 where support for the Sancloud BeagleBone Enhanced (BBE) was added, new conditional configuration of either MII pin muxing or RGMII pin muxing is done depending on the board type. However, the old call to set up MII pin muxing was not removed. This may result in misconfiguration of the pin muxing for the BBE or duplicate configuration for other boards and so we remove this obsolete call. Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-03watchdog: Kconfig: update WDT help messagePatrice Chotard
Restart operation never exists and reset operation never makes the watchdog expire immediately but expire_now operation does. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-05-03dma: ti: k3-udma: Do not touch RT registers before channel configurationPeter Ujfalusi
Upcoming sysfw (2019.03) will not open the channelized firewalls during init, it only going to do so in response to the channel configuration message. Remove the channel state checks done before the channel configuration and move it after the configuration for warning purposes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-05-03firmware: ti_sci: Fix TISCI mailbox receive timeout handlingAndreas Dannenberg
An earlier commit converted the TISCI receive timeouts to be specified in ms rather than us however it failed to take this change into account when passing the actual timeout to be used when invoking the mailbox receive API. This leads to the actual timeout to be 1,000 times shorter than expected and as a result certain TISCI operations would fail. Fix the issue by converting the timeout declared in ms to us on the fly as expected by the respective API. Fixes: fd6b40b1ba20 ("firmware: ti_sci: Add support for NAVSS resource management") Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-03MAINTAINERS, git-mailrc: Update the mmc maintainerPeng Fan
Update the mmc maintainer from Jaehoon to me. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Marek Vasut <marex@denx.de>
2019-05-03drivers: dma: ti: k3-udma: Extract packet data only when Meta data is not NULLKeerthy
Currently packet data is wrongly extracted when metadata is NULL. Fix it and negate the if check. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2019-05-03Merge tag 'efi-2019-07-rc2' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc2 This pull request provides error fixes for the handling of GPT partitions and for the UEFI subsystem.
2019-05-03arm: mvebu: turris_omnia: enable defconfig options needed by vendorMarek Behún
This options will be enabled by default by CZ.NIC shipped U-Boot. Enable them in defconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03arm: mvebu: turris_omnia: add GPIO support to defconfigMarek Behún
Add support for the gpio command and driver for the I2C connected pca9538 controller, to be able to determine if SFP module is present in the Turris Omnia router. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03i2c: mvtwsi: fix reading status register after interruptMarek Behún
The twsi_wait function reads the control register for interrupt flag, and if interrupt flag is present, it immediately reads status register. On our device this sometimes causes bad value being read from status register, as if the value was not yet updated. My theory is that the controller does approximately this: 1. sets interrupt flag in control register, 2. sets the value of status register, 3. causes an interrupt In U-Boot we do not use interrupts, so I think that it is possible that sometimes the status register in the twsi_wait function is read between points 1 and 2. The bug does not appear if I add a small delay before reading status register. Wait 100ns (which in U-Boot currently means 1 us, because ndelay(i) function calls udelay(DIV_ROUND_UP(i, 1000))) before reading the status register. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Mario Six <mario.six@gdsys.cc> Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03arm: mvebu: turris_omnia: add RESET button handlingMarek Behún
There is a Factory RESET button on the back side of the Turris Omnia router. When user presses this button before powering the device up and keeps it pressed, the microcontroller prevents the main CPU from booting and counts how long the RESET button is being pressed (and indicates this by lighting up front LEDs). The idea behind this is that the user can boot the device into several Factory RESET modes. This patch adds support for U-Boot to read into which Factory RESET mode the user booted the device. The value is an integer stored into the omnia_reset environment variable. It is 0 if the button was not pressed at all during power up, otherwise it is the number identifying the Factory RESET mode. This patch also changes bootcmd to a special hardcoded value if Factory RESET button was pressed during device powerup. This special bootcmd value sets the colors of all the LEDs on the front panel to green and then tries to load the rescue image from the SPI flash memory and boot it. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03arm: mvebu: turris_omnia: fix regdomain env var settingMarek Behún
The regdomain environment variable is set according to value read from EEPROM. This has to be done in board_late_init, after the environment variables are read from SPI. Select CONFIG_BOARD_LATE_INIT in Kconfig for the Turris Omnia target. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03arm: mvebu: turris_*: remove watchdog includeMarek Behún
Since board watchdog is now unified and not handled in board files, remove the unnecessary includes. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03arm: mvebu: turris_omnia: print board info as Turris MoxMarek Behún
Unify the way how Omnia and Mox print board information (RAM size and serial number). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03arm: mvebu: turris_omnia: refactor more codeMarek Behún
Refactor RAM size reading from EEPROM in preparation for next patch. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03arm: mvebu: turris_omnia: move ATSHA204A from defconfig to KconfigMarek Behún
This driver is required for Turris Omnia to read ethernet addresses. Move the dependency from turris_omnia_defconfig to Kconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-03arm: mvebu: turris_omnia: fix checkpatch warningsMarek Behún
Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2025-01-14 04:31:20 +0000