summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-26Add a trace commandSimon Glass
Add a trace command with sub-commands to start/stop tracing, print out statistics and dump trace information to memory for later upload to a host. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26Add trace librarySimon Glass
Add a library which supports tracing of execution using built-in gcc features and a microsecond timer. This can be used to record a list of function which are executed, along with a timestamp for each. Later this information can be sent to the host for processing. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26Add function to print a number with grouped digitsSimon Glass
Move bootstage's numbering printing code into a generic place so that it can be used by tracing also. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26bootstage: Correct printf typesSimon Glass
The unstash code is a bit loose with its printf() types, which gives warnings on sandbox. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26Show stdout on error in fit-testSimon Glass
When this test fails it is useful to see the output from U-Boot. Add printing of this information on failure. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26Fix missing return in do_mem_loop()Simon Glass
For some reason this does not normally cause a compiler warning, but the code seems to be incorrect. Add the missing return. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26x86: Correct missing local variable in bootmSimon Glass
Enabling FIT produces a compile error. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26pci: Convert extern inline functions to static inlineSimon Glass
I am not sure of the meaning of extern inline, but this gives errors when building with function instrumenting enabled. Change these functions to static inline. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26cros: exynos: enable cros-ec for smdk5250Hung-ying Tyan
This patch initiates cros-ec in board_init() to enable it for smdk5250. This patch depends on the patch in the MMC series that brings in exynos5-dt.c. Refer to http://patchwork.ozlabs.org/patch/240084. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2013-06-26cros: exynos: add cros-ec device nodes to exynos5250-snow.dtsHung-ying Tyan
This patch adds cros-ec related device nodes to exynos5250-snow.dts. It also adds a gpio node to exynos5250.dtsi. Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2013-06-26cros: adds cros_ec keyboard driverHung-ying Tyan
This patch adds the driver for keyboard that's controlled by ChromeOS EC. Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2013-06-26cros: add LPC support for cros_ecHung-ying Tyan
This patch adds LPC support for carrying out the cros_ec protocol. Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2013-06-26cros: exynos: add SPI support for cros_ecHung-ying Tyan
This patch adds SPI support for carrying out the cros_ec protocol. Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2013-06-26cros: add I2C support for cros_ecHung-ying Tyan
This patch adds I2C support for carrying out the cros_ec protocol. Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2013-06-26cros: add cros_ec driverHung-ying Tyan
This patch adds the cros_ec driver that implements the protocol for communicating with Google's ChromeOS embedded controller. Signed-off-by: Bernie Thompson <bhthompson@chromium.org> Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org> Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2013-06-24Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2013-06-24phylib: add atheros ar803x phyHeiko Schocher
add atheros ar803x phy, used on the upcoming siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
2013-06-24phylib: add natsemi dp83630 phyHeiko Schocher
add natsemi dp83630 phy, used on the upcoming siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
2013-06-24net: update FTGMAC100 for MMU/D-cache supportKuo-Jung Su
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Tom Rini <trini@ti.com>
2013-06-24net: add Faraday FTMAC110 10/100Mbps ethernet supportKuo-Jung Su
Faraday FTMAC110 10/100Mbps supports half-word data transfer for Linux. However it has a weird DMA alignment issue: (1) Tx DMA Buffer Address: 1 bytes aligned: Invalid 2 bytes aligned: O.K 4 bytes aligned: O.K (2) Rx DMA Buffer Address: 1 bytes aligned: Invalid 2 bytes aligned: O.K 4 bytes aligned: Invalid!!! Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Tom Rini <trini@ti.com>
2013-06-24net: phy: supplement support for Micrel's KSZ9031SARTRE Leo
Add function ksz9031_phy_extended_write and ksz9031_phy_extended_read Signed-off-by: Leo Sartre <lsartre@adeneo-embedded.com>
2013-06-24net: macb: add support for gigabit MACBo Shen
Add gigabit MAC support in macb driver - using IP version to distinguish whether MAC is GMAC Signed-off-by: Bo Shen <voice.shen@atmel.com>
2013-06-24net: macb: using phylib to configure phy deviceBo Shen
using phylib to configure phy device in macb driver Signed-off-by: Bo Shen <voice.shen@atmel.com>
2013-06-24net: macb: using AT91FAMILY replace #ifdeferryBo Shen
Using CONFIG_AT91FAMILY replace #ifdeferry for atmel SoC Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-06-24ARM: at91sam9n12: add network support with ksz8851_16mllBo Shen
add network support with ksz8851_16mll on at91sam9n12ek board Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-06-24net: ks8851_mll: add ethernet supportRoberto Cerati
The device interface is 16 bits wide. All the available packets are read from the incoming fifo. Signed-off-by: Roberto Cerati <roberto.cerati@bticino.it> Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it> [voice.shen@atmel.com: address comments from review results] [voice.shen@atmel.com: clean up for submit] Signed-off-by: Bo Shen <voice.shen@atmel.com> Tested-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
2013-06-24phylib: Add Atheros AR8035 GETH PHY supportXie Xiaobo
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
2013-06-24add support for Xilinx 1000BASE-X phy (GTX)Charles Coldwell
commit 39695029bc15041c809df3db4ba19bd729c447fa Author: Charles Coldwell <coldwell@ll.mit.edu> Date: Tue Feb 19 08:27:33 2013 -0500 Changes to support the Xilinx 1000BASE-X phy (GTX/MGT) Signed-off-by: Charles Coldwell <coldwell@ll.mit.edu>
2013-06-24net: Correct check for link-local target IP conflictJoe Hershberger
Make the link-local code conform more completely with the RFC. This will prevent ARP queries for the target (such as while it is rebooting) from causing the device to choose a different link-local address, thinking that its address is in use by another machine. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-06-24PHY: micrel.c: add support for KSZ9031David Andrey
Add support for Micrel PHY KSZ9031 in phylib, including small rework for KSZ9021 to avoid code duplication Signed-off-by: David Andrey <david.andrey@netmodule.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Joe Herschberger <joe.hershberger@gmail.com> Cc: Andy Fleming <afleming@freescale.com> Acked-by: Stefan Roese <sr@denx.de>
2013-06-24net/tftp: sparse fixesKim Phillips
tftp.c:464:17: warning: cast to restricted __be16 tftp.c:552:29: warning: cast to restricted __be16 tftp.c:640:33: warning: cast to restricted __be16 tftp.c:642:25: warning: cast to restricted __be16 Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
2013-06-24net: make IPaddr type big endianKim Phillips
for use with sparse. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
2013-06-24net: Fix build regression in macb.cJoe Hershberger
The added weak symbol must not be static. This was introduced in 416ce623fbad51af57660346ebb6f7befb88b3c9 Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-06-24net/macb: Add arch specific routine to get mdio controlShiraz Hashim
SPEAr310 and SPEAr320 Ethernet interfaces share same MDIO lines to control their respective phys. Currently there is a fixed configuration in which only a particular MAC can use the MDIO lines. Call an arch specific function to take control of specific mdio lines at runtime. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Acked-by: Stefan Roese <sr@denx.de>
2013-06-24net/designware: Do not select MIIPORT for RGMII interfaceVipin Kumar
Do not select MIIPORT for RGMII interface Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Acked-by: Stefan Roese <sr@denx.de>
2013-06-24net: nfs: add dynamic wait periodMatthias Brugger
This patch tackles the time out problem which leads to break the boot process, when loading file over nfs. The patch does two things. First of all, we just ignore messages that arrive with a rpc_id smaller then the client id. We just interpret this messages as answers to formaly timed out messages. Second, when a time out occurs we double the time to wait, so that we do not stress the server resending the last message. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
2013-06-24NET: mvgbe: add support for DoveSebastian Hesselbarth
Marvell Dove also uses mvgbe as ethernet driver, therefore add support for Dove to reuse the current driver. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2013-06-24NET: mvgbe: add phylib supportSebastian Hesselbarth
This add phylib support to the Marvell GBE driver. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2013-06-24NET: phy: add 88E1310 PHY initializationSebastian Hesselbarth
This adds PHY initialization for Marvell Alaska 88E1310 PHY. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2013-06-24pxe: add ipappend supportRob Herring
Add ipappend support to pass network device information to the kernel. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24net: Fix build regression in cmd_pxe.cJoe Hershberger
Not all boards define an SOC. As a result, we can't depend on that. This was introduced in 39f985536d3f0df5dba32c15b64ba2b5d32dd296 Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-06-24pxe: add support for per arch and SoC default pathsRob Herring
A pxelinux server setup for "default" menu is typically an x86 binary. This does not work well with a mixed architecture setup. Extend the default search to look for default-<arch>-<soc> and then default-<arch> before falling back to just "default". Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24pxe: add support for ontimeout tokenRob Herring
ontimeout is similar to default, but is the selection on menu timeout. This is how cobbler sets a default. The label default is supposed to be the default selection when <enter> is pressed. If both default and ontimeout are set, last one parsed wins. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24pxe: simplify menu display and selectionRob Herring
Menus with lots of entries and long append lines are hard to read. Just show a numbered list using the label or name and make the choice by entering the number. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24pxe: always display a menu when presentRob Herring
The prompt flag is for displaying a "boot:" prompt in pxelinux. This doesn't make sense for u-boot as we don't support the pxelinux command interface. So we should just ignore prompt statements and always show the menu if a menu is present. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24pxe: try bootz if bootm fails to find a valid imageRob Herring
Standard pxelinux servers will typically use a zImage rather than u-boot image format, so fallback to bootz if bootm fails. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24bootz: un-staticize do_bootzRob Herring
Make do_bootz available for other functions like do_bootm is. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24pxe: fix handling of different localboot valuesRob Herring
Add support for value of -1 For localboot. A value of -1 means return to u-boot prompt. The localboot value is often 0, so we need to distinguish the value from localboot being selected. A value of greater than or equal to 0 means attempt local boot command. If localboot is selected, we don't want to try other entries. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24pxe: make string parameters constRob Herring
Convert a bunch of string parameters to be const. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24pxe: Use ethact setting for pxeRob Herring
Get the MAC address using eth_getenv_enetaddr_by_index so that the MAC address of ethact is used. This enables using the a NIC other than the first one for PXE boot. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
generated by cgit (git 2.34.1) at 2024-12-23 18:42:39 +0000