summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-08Merge tag 'efi-2019-10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc1 Fix a possible overflow for GUID partition tables. For some runtime services we only have implementations valid at boottime. So we replace them when leaving boottime. Move this from SetVirtualAddressMap() to ExitBootServices() as SetVirtualAddressMap() is not called by all operating systems. Adjust the Python tests accordingly. Bump the supported UEFI specification version to 2.8.
2019-07-08Merge tag 'u-boot-amlogic-20190704' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - fix khadas-vim README - add support for unique generated MAC adresses from SoC serial, limited to Amlogic GXL/GXM boards for now
2019-07-08Merge tag 'mmc-6-23' of https://github.com/MrVan/u-bootTom Rini
- Pull in the series to split fsl_esdhc for i.MX/non-i.MX cleanly
2019-07-08Prepare v2019.07Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-08Merge tag 'mips-fixes-for-2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - mtmips: network stability fixes for gardena-smart-gateway
2019-07-07arm: mediatek: remove arch_misc_initWeijie Gao
The watchdog of mediatek chips is enabled by bootrom before u-boot is running. Previously we choose to enable the wdt driver only to disable the watchdog hardware. Now wdt service is enabled by default. The function arch_misc_init which is only used to disable wdt is no longer needed. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-07board_r: move initr_watchdog to be called after initr_serialWeijie Gao
The initr_watchdog is currently placed before initr_serial. The initr_watchdog calls printf and printf finally calls ops->putc of a serial driver. However, gd->cur_serial_dev points to a udevice allocated in board_f. The gd->cur_serial_dev->driver->ops->putc points the the code region before relocation. Some serial drivers call WATCHDOG_RESET() in ops->putc. When DM is enabled for watchdog, watchdog_reset() is called. watchdog_reset() calls get_timer to get current timer. On some platforms the timer driver is also a DM driver. initr_watchdog is placed right after initr_dm, which means the timer driver hasn't been initialized. So dm_timer_init() is called. To create a new udevice, calloc is called. However start from ops->putc, u-boot execution flow is redirected into the memory region before relocation (board_f). In board_f, dlmalloc hasn't been initialized. The call to calloc will fail, and this will cause DM to print out an error message, and it will call printf again, causing recursive error outputs. This patch places initr_watchdog after initr_serial to solve this issue. Cc: Stefan Roese <sr@denx.de> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Suniel Mahesh <sunil.m@techveda.org>
2019-07-07Merge tag 'dm-pull-7jul19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
Fix booting for wandboard
2019-07-07Merge tag 'video-for-2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix pwm backlight
2019-07-07imx6: wandboard: allow booting from MMC 2Heinrich Schuchardt
One of the SD-CARD slots on the Wandboard Quad B1 is MMC 2. Enable it as a boot device. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-07-07Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
- DWC and i.MX6 fixes
2019-07-07Merge tag 'rockchip-for-v2019.07-rc5-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
2019-07-06video: backlight: fix pwm inversionMarc Dietrich
set_pwm() will always fail with -ENOSYS if pwm_ops set_invert() is not implemented, leaving the backlight dark. Fix this by returning no error if set_invert() is not implemented and no polarity change is requested. Fixes: 57e7775413 ("video: backlight: Parse PWM polarity cell") Signed-off-by: Marc Dietrich <marvin24@gmx.de>
2019-07-06efi_loader: detach runtime in ExitBootServices()Heinrich Schuchardt
Linux can be called with a command line parameter efi=novamap, cf. commit 4e46c2a95621 ("efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted"). In this case SetVirtualAddressMap() is not called after ExitBootServices(). OpenBSD 32bit does not call SetVirtualAddressMap() either. Runtime services must be set to an implementation supported at runtime in ExitBootServices(). Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by: Alexander Graf <agraf@csgraf.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: simplify detachingHeinrich Schuchardt
We do not need any array typed detach list. Let's simply update the pointers directly. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: decision on EFI_RT_SUPPORTED_RESET_SYSTEMHeinrich Schuchardt
Move the logic determining which board supports reset at runtime to Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06test/py: not all boards support UEFI runtime resetHeinrich Schuchardt
As not all boards support resets at runtime do not test for it in the Python tests. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: bump UEFI specification number to 2.8Heinrich Schuchardt
We are implementing UEFI variable RuntimeServicesSupported and set the unimplemented runtime functions return EFI_UNSUPPORTED as described in UEFI specification 2.8. So let's also advertise this specification version in our system table. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-07-06efi_loader: split off detaching SetVirtualAddress()Heinrich Schuchardt
The runtime services SetVirtualAddress() and ConvertPointer() become unavailable after SetVirtualAddress(). Other runtime services become unavailable after ExitBootServices. Move the update of SetVirtualAddress() and ConvertPointer() to efi_relocate_runtime_table(). Use functions with the correct signature when detaching. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_selftest: test variable services at runtimeHeinrich Schuchardt
Provide a unit test for the variable services at runtime. Currently we expect EFI_UNSUPPORTED to be returned as the runtime implementation is still missing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: unimplemented runtime servicesHeinrich Schuchardt
Unimplemented runtime services should always return EFI_UNSUPPORTED as described in the UEFI 2.8 spec. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: let the variable driver patch out the runtimeHeinrich Schuchardt
Our variable services are only provided at boottime. Therefore when leaving boottime the variable function are replaced by dummy functions returning EFI_UNSUPPORTED. Move this patching of the runtime table to the variable services implementation. Executed it in ExitBootServices(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: clean up runtime detachingHeinrich Schuchardt
The detaching of the runtime will have to move to ExitBootServices() to encompass operating system that do not call SetVirtualAddressMap(). This patch changes the logic for the relocation of the pointers in the runtime table such that the relocation becomes independent of the entries in the detach list. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: remove NULL entries from runtime detach listHeinrich Schuchardt
Some entries in the system table are set to NULL in ExitBootServices(). We had them in the runtime detach list to avoid relocation of NULL. Let's instead assign the pointers dynamically in efi_initialize_system_table() to avoid the relocation entry. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: initialization of variable servicesHeinrich Schuchardt
Provide an initialization routine for variable services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: move efi_query_variable_info()Heinrich Schuchardt
Let's keep similar things together. Move efi_query_variable_info() to lib/efi_loader/efi_variable.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: remove superfluous spaces in commentsHeinrich Schuchardt
Leave only a single space after * if not aligning. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06test/py: error message test_efi_selftest_device_treeHeinrich Schuchardt
Correct the error message in test_efi_selftest_device_tree(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_selftest: description of CMD_BOOTEFI_SELFTESTHeinrich Schuchardt
The current short description has a typo. Let it stand out clear that we provide unit tests. Improve the description of the CMD_BOOTEFI_SELFTEST configuration option. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-07-06disk: efi: buffer overflow in part_get_info_efi()Heinrich Schuchardt
In part_get_info_efi() we use the output of print_efiname() to set info->name[]. The size of info->name is PART_NAME_LEN = 32 but print_efiname() returns a string with a maximum length of PARTNAME_SZ + 1 = 37. Use snprintf() instead of sprintf() to avoid buffer overflow. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-05Merge tag 'rpi-next-2019.07' of https://github.com/mbgg/u-bootTom Rini
- fix complation error for CONFIG_USB - update RPi3 DTBs to v5.1-rc6 state - add defconfig for RPi3 B+ - Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define
2019-07-05mips: mt76xx: Implement new d-cache fix in last_stage_init()Stefan Roese
With commit 06985289d452 ("watchdog: Implement generic watchdog_reset() version") the init sequence has changed in arch_misc_init(), resulting in a re-appearance of the d-cache issue on MT7688 boards (e.g. gardena). When this happens, the first (or sometimes later ones as well) TFTP command hangs and does not complete correctly. This leads to the assumption that the d-cache is not in a clean state once the ethernet driver is called (d-cache is used here for the buffers). The old work- around with the cache flush somehow does not work any more now with the new code change. Unfortunately adding CONFIG_SYS_MALLOC_CLEAR_ON_INIT also did not fix this issue. With v2019.07-rc3 it shows again. The time of accessing the data seems to be very important here. It needs to be "very late" in the boot process. Testing has shown, that copying a 64KiB area in DDR at a very late bootup time, directly before calling into the prompt, fixes this issue. Flushing of the complete d-cache does not seem to necessary, as this copy alone seems to fix this problem. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-07-05usb: dwc3: Use UCLASS_NOP instead of UCLASS_MISC for the DWC3 generic glueJean-Jacques Hiblot
dwc3-generic has been broken since MISC uclass has been modified to scan DT sub-nodes after bind. Fixing it by a using the no-op uclass. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-05dm: Add a No-op uclassJean-Jacques Hiblot
This uclass is intended for devices that do not need any features from the uclass, including binding children. This will typically be used by devices that are used to bind child devices but do not use dm_scan_fdt_dev() to do it. That is for example the case of several USB wrappers that have 2 child devices (1 for device and 1 for host) but bind only one at a any given time. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-05usb: dwc3-generic: remove dm_scan_fdt_dev() from the remove() callbackJean-Jacques Hiblot
There is simply no reason to do that here. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-05usb: ehci-mx6: Fix bus enumeration for DM caseMarek Vasut
The EHCI iMX6 driver is only partly converted to DT probing and still uses a tremendous amount of hard-coded addresses. Worse, the driver uses hard-coded SoC-model-specific base addresses, which are derived from values protected by SoC-specific macros, hence the driver is also compiled for a specific SoC model. Even worse, the driver depends on specific sequential indexing of the controllers, from which it derives offsets in the PHY and ANATOP register sets. However, when the driver is probed from DT, the indexing is not correct. In fact, each controller has index 0. This patch derives the index for DT probing case from the controller base addresses, which is not the way this should be done, however it is the least intrusive approach, favorable this close to release. The necessary steps to convert this driver fully to DT probing are described inside the patch, however this should be done in the next release and depends on iMX clock driver patches. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Adam Ford <aford173@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
2019-07-05rockchip: make_fit_atf.py: fix loadables property set errorAndy Yan
Commit b238e4b00ced ("rockchip: Cleanup of make_fit_atf.py.") set firmware = "atf_1"; loadables = "uboot","atf_1","atf_2"; Actually it should be: firmware = "atf_1"; loadables = "uboot","atf_2","atf_3"; Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-04board: amlogic: add mailing-list to MAINTAINERSNeil Armstrong
Add missing mailing-list to the amlogic boards MAINTAINERS file. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04Merge tag 'u-boot-imx-20190704' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2019.07 ----------------- - Wandboard
2019-07-04board: amlogic: Generate unique MAC address for Q200 and P212 based boardsNeil Armstrong
Enable unique MAC address generation for boards usins SoCs having a known functional and valid unique serial number. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04ARM: meson: add unique MAC address generationNeil Armstrong
Add support for generating an unique MAC address using the SoC internal serial number from the Secure Monitor interface. The algorithm generates an unicast locally administered 6bytes minus 2bits address using an crc16 of the serial for the top 16bits with the lower 2 bits masked to setup the unicast locally administered property and a crc24 for the lower 24bits. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04ARM: meson: sm: Add secure monitor calls to retrieve SoC serial numberNeil Armstrong
The Secure Monitor interface permits retrieving the SoC Serial Number, add a function to retrieve it. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04board: amlogic: vim: Fix READMEAndreas Färber
Unlike the BayLibre repos Khadas' repo defaults to using native gcc, so specify the CROSS_COMPILE setting matching the prescribed toolchain. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04wandboard: README: Adjust the U-Boot proper binary nameFabio Estevam
After the conversion to DM the U-Boot proper binary name is 'u-boot-dtb.img', so adjust it accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04wandboard: Add FIT image supportFabio Estevam
After the transition to DM, only the mx6dl/solo wandboard is supported. Add FIT image support so that all the wandboard variants can be supported, like it was prior to the DM conversion. Successfully booted Linux on mx6q/solo/qp wandboards. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04wandboard: Add mmc0 aliasFabio Estevam
Add a mmc0 alias so that U-Boot proper can associate mmc0 with the boot SD card. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04wandboard: Import extra wandboard devicetree filesFabio Estevam
Import wandboard devicetree files so that the mx6q and mx6qp variants can be properly supported. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04wandboard: Sync with devicetree files from kernel 5.1.9Fabio Estevam
Udate the wandboard devicetree files with the ones from kernel 5.1.9. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04mx6: dts: Move dtbs under SoC levelFabio Estevam
Place dtbs under SoC level rather than board level. imx6q-novena.dtb and imx6dl-wandboard-revb1.dtb were placed under the board config option, so move them to SoC level. This also aligns with the kernel dts Makefile format. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04mx6: dts: Keep dtb entries sortedFabio Estevam
Keep dtb entries sorted to help adding new dtbs in an organized form. Signed-off-by: Fabio Estevam <festevam@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-26 03:58:23 +0000