summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-08omap_hsmmc: introduce omap_hsmmc_data structNikita Kiryanov
Currently there's no appropriate place to store driver specific data because the pointer that is meant for that (priv) is being used to store the base address of mmc registers. Introduce a new struct for storing driver specific data. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2013-03-08omap_hsmmc: fix out of bounds array accessNikita Kiryanov
There are 3 MMC/SD/SDIO controllers in OMAP SoCs, but only 2 structs are defined for devices. This leads to data being written outside of array bounds on systems that use all 3 controllers. Update hsmmc_dev array to the correct size. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2013-03-08omap: consolidate common mmc definitionsNikita Kiryanov
The various mmc_host_def.h files are almost identical. Reduce code duplication by moving the similar definitions to a common header file. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2013-03-08am33xx: Update DDR3 EMIF configuration sequenceTom Rini
Based on http://processors.wiki.ti.com/index.php/AM335x_EMIF_Configuration_tips we need to re-work our sequence in config_sdram slightly to match what the TRM describes as the correct sequence. In our current (incorrect) sequence some edge cases may fail to initalize correctly. Signed-off-by: Tom Rini <trini@ti.com>
2013-03-08am335x_evm: Add am335x_evm_usbspl build targetTom Rini
We add USB (RNDIS gadget) SPL support as a separate target. We need to pull out YMODEM support in order to be a small enough target binary. Signed-off-by: Tom Rini <trini@ti.com>
2013-03-08am335x_evm: Never set CONFIG_EXTRA_ENV_SETTINGS in SPLTom Rini
Because of our support for network-based SPL, we don't discard all of the environment related functions. We however never make use of the default CONFIG_EXTRA_ENV_SETTINGS items and as this variable grows, it brings us closer to (or with some toolchains, over) our SPL size limit. Never set this in the case of SPL. Signed-off-by: Tom Rini <trini@ti.com>
2013-02-28ARM: ns9750dev: remove remainders of dead boardWolfgang Denk
Commit 8b710b1 started removing code for the unmaintained "ns9750dev" board; the board support is still broken, and not included anywhere in the Makefile or boards.cfg. Remove the remaining dead code. Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-02-28README.scrapyard: add missing commit IDsWolfgang Denk
Now that the patches have made it into mainline, we can also add the commit IDs. Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-02-21Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-02-21Merge 'u-boot-microblaze/mainline/arm' into 'u-boot-arm/master'Albert ARIBAUD
This pulls the three following ZYNQ commits into ARM master: 7dca54f8: xilinx: zynq: Enable DCC and create new zynq_dcc board 59c651f4: arm: zynq: Add SLCR support with system reset 00ed3458: arm: zynq: Add lowlevel initialization to C
2013-02-18am335x evm: Add am335x_evm_spiboot targetTom Rini
This target will move the environment into SPI flash and documents the expected layout. We correct the SPL define for where U-Boot is and remove an unused define. Signed-off-by: Tom Rini <trini@ti.com>
2013-02-18doc/SPL/README.am335x-network: Document using ethernet (and USB) SPLIlya Yanok
Added README file with the description of required options and host configuration to use network SPL with am335x targets. Briefly discuss how to use this configuration to program empty boards. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-02-18am335x_evm: Add NET environment variablesChase Maupin
* Add environment variables to support network booting Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-02-18am335x_evm: Add SPI environment variablesChase Maupin
* Added variables to support SPI booting * Note that the first 512KiB are reserved for 4 copies of SPL. Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-02-18am335x_evm: Add NAND environment variablesChase Maupin
* Added support to the default environment variables for NAND boot. * Add nandboot to the default bootcmd. Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-02-18omap3: mvblx: pass FPGA version to the kernelMichael Jones
Extract FPGA version from the .rbf and pass this info to the kernel. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
2013-02-18omap3: mvblx: select fpgafilename according to orientationMichael Jones
Rather than load the FPGA file from the FAT partition, look at entry in system EEPROM to decide which file to retrieve directly from the EXT3 partition. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
2013-02-18omap3: mvblx: change console to ttyO0 and make silent by default.Howard Gray
Also, change bootdelay to 0 but allow pressing 'S' to stop at U-Boot prompt. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Signed-off-by: Howard Gray <howard.gray@matrix-vision.de> Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
2013-02-18OMAP3: igep00x0: Add new IGEP COM PROTON.Enric Balletbo i Serra
The IGEP COM PROTON is a new ultra compact module design with an on-board ethernet controller. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2013-02-18OMAP3: igep00x0: add missing include mach-types.hEnric Balletbo i Serra
Current '#if' directives (used in igep00x0.h config file) comparing MACH_TYPE values in igep00x0.h doesn't work as expected. The comparision between CONFIG_MACH_TYPE and MACH_TYPE_IGEP0020 is always true independent of the IGEP machine configured. For example, following directive if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) define something endif Is always evaluated true although we configure u-boot for MACH_TYPE_IGEP0030. The build doesn't shows any error so looks that both defines had always the same value. Including the mach-types.h file sets properly the value of MACH_TYPE_IGEPxxxx. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2013-02-18OMAP3: igep00x0: use official board names.Enric Balletbo i Serra
This trivial patch only changes current boards names for the official names. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2013-02-18am335x_evm: enable support for booting via USBIlya Yanok
This adds necessary config options and a new build target, am335x_evm_usbspl, to enable usb booting and fixes board_eth_init() function to take into account that we may have USB ether support in SPL now. This uses the same MAC for both cpsw and USB, in order to match ROM behavior. The usbspl build target does not contain UART SPL, CPSW SPL or extra environment settings, so that we may fit within our binary size constraint. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com> Signed-off-by: Tom Rini <trini@ti.com>
2013-02-18am33xx: support for booting via usbethIlya Yanok
This patch adds BOOT_DEVICE define for USB booting and fixes spl_board_init function to call arch_misc_init (this is the place there musb is initialized). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2013-02-18spl: support for booting via usbethIlya Yanok
In case of usbeth booting just call net_load_image("usb_ether"). This patch also adds CONFIG_SPL_USBETH_SUPPORT and CONFIG_SPL_MUSB_NEW_SUPPORT config options to enable linking of SPL against USB gagdet support and new MUSB driver resp. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2013-02-18am33xx: pcm051: Remove wp pin mux for sd-cardLars Poeschel
The pcm051 does not have the wp pin connected to the sd-card socket. Therefore remove the pinmux for the pin. The was a carry-over from the am335x evm code. Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
2013-02-18beagle: expansion boards: add LSR COM6L adapterrobertcnelson@gmail.com
http://www.lsr.com/wireless-products/com6l The eeprom on this expansion board requires 16bit addressing. Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2013-02-18beagle: expansion boards: retry i2c_read with 16bit addressingrobertcnelson@gmail.com
Some expansion boards now ship with at24 eeproms that need to communicate via 16bit addressing. Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2013-02-18da8xx: Add the missing pinmux for da830 to the gpio driverTomas Novotny
The pinmux was generated from linux/arch/arm/mach-davinci/da830.c as of kernel version 3.7.5. If the driver is used for the da850, then SoC variant must be specified by CONFIG_SOC_DA850. Signed-off-by: Tomas Novotny <tomas@novotny.cz> Cc: Tom Rini <trini@ti.com>
2013-02-18da8xx: ea20: Add the configuration define for the exact SoC variantTomas Novotny
Signed-off-by: Tomas Novotny <tomas@novotny.cz> Cc: Tom Rini <trini@ti.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2013-02-15Merge branch 'fixes' of git://git.denx.de/u-boot-mipsTom Rini
2013-02-15MIPS: board.c: remove manual relocation of env_name_specDaniel Schwierzeck
Remove the manual relocation of env_name_spec. This has been missed in the previous patch series for introducing dynamic relocation on MIPS. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-14x86: Remove unused real mode codeSimon Glass
This code is pretty old and we want to support only 32-bit systems now. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-02-14x86: Rename CONFIG_NO_X86_RESET_VECTOR to CONFIG_X86_RESET_VECTORSimon Glass
Invert the polarity of this option to simplify the Makefile logic. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Gabe Black <gabeblack@chromium.org>
2013-02-14x86: Remove unneeded cruft from main MakefileSimon Glass
These lines are dealt with in the x86 Makefile and link script, so punt them. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Gabe Black <gabeblack@chromium.org>
2013-02-14x86: Remove sc520 cpuSimon Glass
This x86 CPU variant is no longer required as the boards that use it have been removed. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-02-14x86: Remove eNET boardsSimon Glass
These are no longer used and should be removed. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-02-12Merge branch 'next' of git://git.denx.de/u-boot-mipsTom Rini
2013-02-12MIPS: add dynamic relocation supportGabor Juhos
The code handles relocation entries with the following relocation types only: mips32: R_MIPS_REL32 mips64: R_MIPS_REL+R_MIPS_64 xburst: R_MIPS_REL32 Other relocation entries are skipped without processing. The code must be extended if other relocation types must be supported. Add -pie to LDFLAGS_FINAL to generate the .rel.dyn fixup table, which will be applied to the relocated image before transferring control to it. The CONFIG_NEEDS_MANUAL_RELOC is not needed after the patch, so remove that as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12MIPS: u-boot.lds: add relocation specific sectionsGabor Juhos
This section contain the table needed for dynamic relocation. Also provide symbols for the relocation code to access the table. Discard all sections which are not needed in the final ELF binary and U-Boot image. Section .dynsym cannot be discarded or GNU ld crashes otherwise. This section will be stripped by GNU objcpy in a later patch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12MIPS: start.S: use symbol __image_copy_end for U-Boot image relocationDaniel Schwierzeck
Use the newly introduced symbol __image_copy_end as end address for relocation of U-Boot image. This is needed for dynamic relocation added in later patches. This patch obsoletes the symbols uboot_end and uboot_end_data which are removed. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12MIPS: start.S: optimize BSS initializationDaniel Schwierzeck
Get the start and end address for clearing BSS from the newly introduced symbols __bss_start and __bss_end. After GOT is relocated, those symbols are already pointing to the correct addresses. Also optimize the loop by moving the address incrementation to the delay slot to avoid the initial sub instruction. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12MIPS: board.c: switch to new symbols __bss_end and __image_copy_endDaniel Schwierzeck
Use the newly introduced symbols __image_copy_end and __bss_end for setting up the memory area for the relocated U-Boot. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12MIPS: u-boot.lds: introduce symbol __image_copy_endDaniel Schwierzeck
This symbol is used in later patches as end address for relocation of the U-Boot image into RAM. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12MIPS: u-boot.lds: merge all BSS sections and introduce symbols __bss_[start|end]Daniel Schwierzeck
These symbols are used in later patches for as addresses for clearing the BSS area in the relocated U-Boot image. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12MIPS: compute num_got_entries from .got section's sizeGabor Juhos
The '__got_start' and '__got_end' symbols are used only in the linker script to compute the value of the 'num_got_entries' symbol. Remove the symbols and use the SIZEOF(.got) command to get the size of the .got section. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-02-12MIPS: start.S: unify and simplify reset vector handlingDaniel Schwierzeck
Adopt reset vector handling from Yamon. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12MIPS: start.S: remove obsolete 64 bit handling in setup_c0_statusDaniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12MIPS: xburst: fix broken access to global_dataDaniel Schwierzeck
Fix access to global_data which is broken since commits: commit 035cbe99cd2fd4adf9d7fd95aeebb5f814e37eb9 Author: Simon Glass <sjg@chromium.org> Date: Thu Dec 13 20:49:08 2012 +0000 mips: Move per_clk and dev_clk to arch_global_data Move these field into arch_global_data and tidy up. The other CONFIG_JZSOC fields are used by various architectures, so just remove the #ifdef bracketing for these. Signed-off-by: Simon Glass <sjg@chromium.org> commit 582601da2f90b1850aa19f7820b1623c79b3dac6 Author: Simon Glass <sjg@chromium.org> Date: Thu Dec 13 20:48:35 2012 +0000 arm: Move lastinc to arch_global_data Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org> commit 66ee69234795c0596f84b25f06b7fbc2e8ed214c Author: Simon Glass <sjg@chromium.org> Date: Thu Dec 13 20:48:34 2012 +0000 arm: Move tbl to arch_global_data Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
2013-02-12am335x_evm: Fix CPSW ethernet on GP EVM and EVM-SKTom Rini
In commit cfd4ff6 we implemented part of advisory 1.0.10 (internal delay for RGMII mode not supported). This in turn however requires that we set the tx clock delay feature in the PHY itself. Signed-off-by: Tom Rini <trini@ti.com>
2013-02-12Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
generated by cgit (git 2.34.1) at 2024-12-29 07:28:35 +0000