summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-24cmd: clk: cosmetic: correct code alignment in show_clksPatrick Delaunay
Correct code alignment in show_clks() function. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-24clk: ccf: mux: change the get_rate helperDario Binacchi
The previous version of the get_rate helper does not work if the mux clock parent is changed after the probe. This error has not been detected because this condition has not been tested. The error occurs because the set_parent helper does not change the parent of the clock device but only the clock selection register. Since changing the parent of a probed device can be tricky, the new version of the get_rate helper provides the rate of the selected clock and not that of the parent. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24clk: ccf: mux: fix access to the sandbox registerDario Binacchi
The tests developed for the mux clock are run on the sandbox. They don't call the clk_mux_set_parent routine and therefore they do not detect this error. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24clk: ccf: mux: fix typoDario Binacchi
Close the opening bracket. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24clk: ccf: mux: change include orderDario Binacchi
Apply u-boot coding style on include files order. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24clk: fix the console output of clk_registerDario Binacchi
The parent->name variable can be used only in case the uclass_get_device_by_name routine returns successfully. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24clk: set flags in the ccf registration routinesDario Binacchi
The top-level framework flags are passed as parameter to the common clock framework (ccf) registration routines without being used. Checks of the flags setting added by the patch have been added in the ccf test. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24dm: test: clk: add the test for the ccf gated clockDario Binacchi
Unlike the other clock types, in the case of the gated clock, a new driver has been developed which does not use the registering routine provided by the common clock framework. The addition of the ecspi0 clock to sandbox therefore allows testing the ccf gate clock. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-24clk: imx6: Add definition for IMX6QDL_CLK_ENET_REF clockLukasz Majewski
After commit 673f6597321d ("net: fec_mxc: support i.MX8M with CLK_CCF") all NXP boards, which are not IMX8 and in the same time are supporting CCF need to provide PTP clock. On the i.MX6Q this clock is provided with IMX6QDL_CLK_ENET_REF in the Linux kernel's CCF. Code in this change models the simplest case when enet reference clock is generated from 'osc' clock. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-08-24clk: imx: Add support for pllv3 enet clockLukasz Majewski
This code has been ported from Linux kernel v5.5.5 (tag) and has been adjusted to U-Boot's DM. It adds support for correct recognition of IMX_PLLV3_ENET flag in the clk-pllv3.c driver. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-08-24clk: imx6: Add definition for IMX6QDL_CLK_ENET clockLukasz Majewski
After commit 673f6597321d ("net: fec_mxc: support i.MX8M with CLK_CCF") all NXP boards, which are not IMX8 and in the same time are supporting CCF need to provide IMX6QDL_CLK_ENET. This change defines the missing clock in i.MX6Q's CCF. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-08-24clk: ICS8N3QV01 remove superfluous codeHeinrich Schuchardt
Do not calculate a unused value of n which is overwritten in both branches of the subsequent if statement. Identified by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-08-23Merge branch '2020-08-21-stdio-cleanup'Tom Rini
- Clean up common/stdio.c and migrate some related options to Kconfig
2020-08-23stdio: Tidy up the coding styleSimon Glass
Bring the coding style in this file up to the current level. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23stdio: Drop brackets around &devs.listSimon Glass
These brackets are not needed. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23stdio: Update to use compiler for Kconfig checksSimon Glass
Drop use of the preprocessor where possible. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23stdio: Drop #ifdefs in the header fileSimon Glass
These prevent the use of IS_ENABLED() and are unnecessary. Drop them and fix a few code-style nits nearby. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEVSimon Glass
Now that this is in Kconfig we can move the logic at the top of the file to Kconfig, and use if() instead of #if. Update the file with these changes. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23Convert CONFIG_SYS_DEVICE_NULLDEV to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SYS_DEVICE_NULLDEV Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23Convert CONFIG_SPLASH_SCREEN et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23moveconfig: Skip binary and ELF filesSimon Glass
Add a few more file extensions to the list of files that should not be processed. This avoids unicode errors, for example. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23Convert CONFIG_NETCONSOLE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NETCONSOLE Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-20Merge tag 'xilinx-for-v2020.10-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2020.10-rc3 - Fix fdtfile variable setup - Fix bootm_*/fdt_high/initrd_high variables handling - Fix Kconfig dependencies for Xilinx drivers - Fix booting u-boot from lowest memory - Fix firmware payload argument count for Versal - Fix dfu configurations - Fix mio_bank property handling - Fix and align code around ID detection - Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG - Simplify logic around reading MAC from eeprom - Decrease malloc length for zynqmp mini qspi - Enable preboot for ZynqMP and Versal i2c: - Fix i2c eeprom partitions handling mmc: - Fix logic around HS mode enabling and use proper functions
2020-08-20Merge branch '2020-08-19-mediatek-updates'Tom Rini
- Assorted updates for MediaTek platforms
2020-08-20clk: versal: Move pm_query_id out of clock driverMichal Simek
There is no reason to have firmware specific structure in clock driver. Move it to generic location and also initialize enum values which is based on https://lore.kernel.org/linux-arm-kernel/20200318125003.GA2727094@kroah.com/ recommended way to go to make sure that values guaranteed by compiler. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: sdhci: Use upper/lower_32_bits macrosMichal Simek
Instead of recasting and shifting use macros which are designed for taking upper/lower 32bit value from 64bit variable. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: sdhci: Enable high speed conditional on the corresponding bitFaiz Abbas
The capabilities register has a field to indicate whether the host supports high speed mode or not. Add high speed host_caps based on this bit instead of enabling it by default. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Michal Simek <michal.simek@xilnx.com> Tested-by: Michal Simek <michal.simek@xilnx.com> (zcu104 with sdhci-caps-mask = <0 0x200000>;)
2020-08-20xilinx: common: Change bootm_size variable settingMichal Simek
Linux kernel for arm32 requires dtb and initrd to be placed in low memory to work properly. This requirement is described in chapter 4b) and 5) in Linux documentation (Documentation/arm/booting.rst). There is an issue on arm32 with 2GB of memory that bootm_size is bigger than Linux lowmem (for example with VMSPLIT_3G). That's why limit bootm size on these systems not to be above 768MB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: common: Check return value from variable setupMichal Simek
env_set..() can failed that's why check return status and report it back to make sure that user is aware that's something went wrong. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: common: Get rid of initrd_high variable setupMichal Simek
When bootm_low/bootm_size are setup properly there is no need to setup any initrd_high address. Location for initrd is determined through LMB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: common: Get rid of fdt_high variableMichal Simek
There is no need to setup this variable if bootm_low and bootm_size variable are properly setup. If fdt_high variable is missing U-Boot is asking LMB to return free memory which is not used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: Change logic around zynq_board_read_rom_ethaddr()Michal Simek
There is no reason to build private function when CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET is not defined. There is already weak function which handles default case properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIGMichal Simek
Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG to enable/disable updating variables with run time information. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: versal: Enable i2c misc eeprom driverMichal Simek
Enable this driver to be able to work with i2c based eeproms on Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: fix incorrect map not align with IPI HWIbai Erkiaga
Current IPI module register description is not align with IPI HW. The registers with the wrong offset are not used so it does not cause real issues. This patch aligns the register description. Additionally comments added to explain why recv function does not check any flag prior copying rx data. Fixes: 660b0c77d816 ("mailbox: zynqmp: ipi mailbox driver") Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: remove chip_id functionIbai Erkiaga
Remove chip_id function and integrate the firmware call in the zynqmp_get_silicon_idcode_name function. The change avoids querying the firmware twice and makes the code bit more clear. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: get chip ID at EL3Ibai Erkiaga
Modify the board init function to allow getting the chip ID when U-Boot proper is executed at EL3. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: get chip ID using firmware driverIbai Erkiaga
Current implementation for getting chip ID uses either raw access on EL3 or a SMC call to get the silicon information. Following change simplifies the code using always the firmware driver. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: merge firmware calls for EL2 and EL3Ibai Erkiaga
This patch merges ZynqMP firmware calls under xilinx_pm_request in order to make trainsparent the EL. Calls at EL3 are send through IPI messages and EL2 through SMC calls. The EL2 call uses fixed payload and arg size as the EL3 call. The firmware is capable to handle PMUFW_PAYLOAD_ARG_CNT bytes but the firmware API is limited by the SMC call size. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: synchronize firmware call return payloadIbai Erkiaga
Removes duplicated definition of PAYLOAD_ARG_CNT and define it in the firmware driver. Additionally fixes payload buffer declarations without macro usage Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: zynq: Fix default value for xlnx,mio-bankMichal Simek
DT binding is saying that default value is 0 not -1 that's why fix it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-08-20xilinx: Fix xlnx,mio_bank propertyMichal Simek
s/xlnx,mio_bank/xlnx,mio-bank/g DT binding is describing mio-bank not mio_bank that's why fix all DTSes and also driver itself. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-08-20i2c: eeprom: Use reg property instead of offset and sizeMichal Simek
Remove adhoc dt binding for fixed-partition definition for i2c eeprom. fixed-partition are using reg property instead of offset/size pair. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-20xilinx: zynqmp: Enable DFU tftp supportMichal Simek
Enable DFU tftp support for firmware update. Fill dfu_ram_tftp variable to have command present for showing how to use it. boot FIT image has been created from below fragment. Key part is that type of image has to be firmware. Also based on experiment load property is completely ignored and base addresses are taken from dfu_alt_info variable. $ cat update_uboot.its /dts-v1/; / { description = "Automatic U-Boot update"; #address-cells = <1>; images { Image { description = "Kernel"; data = /incbin/("/tftpboot/Image"); compression = "none"; arch = "arm64"; type = "firmware"; os = "linux"; load = <0x80000>; entry = <0x80000>; hash-1 { algo = "sha1"; }; }; system.dtb { description = "DTB"; data = /incbin/("/tftpboot/system.dtb"); compression = "none"; arch = "arm64"; type = "firmware"; load = <0>; hash-1 { algo = "sha1"; }; }; }; }; $ mkimage -f update_uboot.its /tftpboot/boot When U-Boot starts get IP address and server IP. dhcp setenv serverip 192.168.0.105 And then run prepared command. run dfu_ram_tftp Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: Align dfu ram with booti commandMichal Simek
Image should be loaded to 0x80000 address and not to $kernel_addr_r. Also kernel_addr, fdt_addr and fdt_size in zynqmp case are not defined that's why define it to be aligned with Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20arm64: zynqmp: Reduce malloc memory for mini QSPI configurationAshok Reddy Soma
Mini U-boot runs on lower foot print of 256KB OCM. Hence 8K memory for malloc may not be required. Reduce it by 1.5K. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: versal: Use lowest memory for U-BootMichal Simek
Find and use the lowest memory for Versal to make sure that we keep u-boot as low as possible and never use memory above u-boot's maximum VA mapping. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20lib: fdt: Convert fdtdes_setup_mem..() to livetree APIMichal Simek
Convert fdtdec_setup_mem_size_base(), get_next_memory_node(), fdtdec_setup_memory_banksize() and fdtdec_setup_mem_size_base_lowest() to livetree API. Tested on ZynqMP zcu104 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-20lib: fdt: Introduce fdtdec_setup_mem_size_base_lowest()Michal Simek
New function should be called from board dram_init() because it initialized gd->ram_base/ram_size. It finds the lowest available memory. On systems with multiple memory nodes finding out the first memory node by fdtdec_setup_mem_size_base() is not enough because this memory can be above actual U-Boot VA mapping. Currently only mapping till 39bit is supported (Full 44bit mapping was removed by commit 7985cdf74b28 ("arm64: Remove non-full-va map code")). If DT starts with the first memory node above 39bit address then system can be unpredictable. The function is available only when multiple memory bank support is enabled. Calling fdtdec_setup_memory_banksize() from dram_init() is not possible because fdtdec_setup_memory_banksize() is saving dram information to bd structure which is placed on stack but not initialized at this time. Also stack is placed at location setup in dram_init(). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-20versal: fix versal PM ret payload sizeIbai Erkiaga
The PM return payload size is defined as 4 bytes for Versal arquitecture while the PM calls implemented both in the Versal clock driver and ZynqMP firmware driver expects 5 bytes length. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-21 23:04:09 +0000