summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-29rockchip: rk322x: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: move SoC setting into arch_cpu_init()Kever Yang
The SoC one time setting should go to arch_cpu_init() in rk322x.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3128: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3036: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3036: move dram_init() into soc fileKever Yang
Move dram_init() into rk3036.c so that we can use to common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: sdram_common: add common dram_init_banksizeKever Yang
dram_init_banksize() can be common used by all SoCs, move it into sdram_common.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: add common board file for U-Boot properKever Yang
Add common board file for Rockchip SoCs to avoid too much copy-paste work for different SoCs. This board file in charge for common board_init() and board_late_init() in U-Boot proper. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: clean up board_usb_init() for all SoCsKever Yang
Use "snps,dwc2" for compatible name and and common variable names so that we can share the common code for all SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: convert to use ROCKCHIP_BOOT_MODE_REG for fastboot tagKever Yang
The fastboot_set_reboot_flag() update a TAG into a register for next boot, use the common macro for the register so that we can re-use the function for different SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: add board_debug_uart_init()Kever Yang
Add board_debug_uart_init() to make the debug UART work with correct setting. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: Migrate to use common spl board fileKever Yang
rk3399 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move chromebook bob specific flow to its board fileKever Yang
Add a board_early_init_f() in board_init_f() and move the board specific init code into its own board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move boot_devices into soc fileKever Yang
Move boot_devices definition into rk3399.c, so that we can share the common code for board_spl_was_booted_from(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399; move spl_board_init() into soc fileKever Yang
Move spl_board_init() into rk3399.c so that we can re-use the common SPL board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move SoC setting into arch_cpu_init()Kever Yang
SoC setting like DDR secure region and EMMC clock setting should go to arch_cpu_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: show SPL BANNER earlier in board_init_f()Kever Yang
Show the SPL BANNER earlier so that we know already get into SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move spl_perform_fixups() into soc fileKever Yang
Move the spl_perform_fixups() into rk3399.c so that we can use common spl board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: migrate to use common spl board fileKever Yang
rk3368 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: migrate to use common spl board fileKever Yang
rk3328 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: add STIMER_BASE definitionKever Yang
Add the CONFIG_ROCKCHIP_STIMER_BASE so that we can use the stimer init function in tpl.c and spl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288-veyron: Migrate "u-boot, boot0" to "u-boot, spl-boot-order"Kever Yang
"u-boot,spl-boot-order" is more flexible and other rockchip SoCs has convert to use it, migrate to use the new dts property. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: phycore: remove no use "u-boot, boot0" in dtsKever Yang
We are using "u-boot,spl-boot-order" now and re-use the definition from rk3288-u-boot.dtsi, so remove it directly here. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Migrate to use common spl board fileKever Yang
rk3288 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move dram_init_banksize() into soc fileKever Yang
Mov edram_init_banksize() into rk3288.c so that we can re-use the common SPL board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288-phycore: move phycore_init() to its own board fileKever Yang
phycore_init() is use for phycore board only, it should be move back to phycore-rk3288.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move setup_led() to firefly-rk3288Kever Yang
Only firefly-rk3288 has the dts node "u-boot,boot-led", while CONFIG_SPL_LED is not enable, move code to firefly-rk3288 now in case someone need this code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: show SPL BANNER earlier in board_init_f()Kever Yang
Show the SPL BANNER earlier so that we know already get into SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: fit_spl_optee: rockchip: fix warning unit_address_vs_regKever Yang
Update to fix warning: u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/optee@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /configurations/conf@1 has a unit name, but no reg property Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: migrate to use common spl board fileKever Yang
rk322x has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: introduce arch_cpu_init() for SoC setting initKever Yang
Use arch_cpu_init() to init SoC secure region and move it to rk322x.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: migrate to use common spl board fileKever Yang
rk3188 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: move spl_board_init() into rk3188.cKever Yang
Clean up the rk3188.c so that we can re-use the common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: Migrate to use BOOTROM_SUPPORT driverKever Yang
SPL bootrom support is a boot device just like mmc and etc, use formal boot device instead of jump to bootrom directly. Enable the Kconfig by default if ROCKCHIP_BACK_TO_BROM is enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: move usb uart init into arch_cpu_init()Kever Yang
The SoC feature init will be better to use arch_cpu_init() and goes to soc file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: init CPU freq in clock driverKever Yang
Init CPU frquency in clock driver instead of in SPL board file, this will help for use common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: add common spl board fileKever Yang
The common spl board file handles board_init_f() in SPL, and with board_early_init_f() and arch_cpu_init() callback, other operateion after board_init_f() should go to board specific spl_board_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-26rockchip: declear boot_devices in bootrom.hKever Yang
boot_devices may defined in soc file, and used in board file, we need to delear it in header file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-26rockchip: intruduce common BROM_BOOTSOURCE_ID_ADDRKever Yang
The boot source from BootRom is store at a fix offset of IRAM, update to use the common macro instead of rk3399 specific one. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-26rockchip: add CONFIG_IRAM_BASE for all SoCsKever Yang
Rockchip SoCs have internal sram for bootrom data area and for sdram init program space. Introduce the base address in case we need to use it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-26rockchip: remove redundant CONFIG_SYS_NS16550_MEM32Kever Yang
The CONFIG_SYS_NS16550_MEM32 already defined in rockchip_common.h, no need to define again in soc level header. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-26include: configs: Increase CONFIG_SYS_BOOTM_LEN to 16MBShyam Saini
The default value of CONFIG_SYS_BOOTM_LEN is 0x800000 i.e, 8MB which causes board reset because of larger uImage size. This was tested on rk3288 Amarula Vyasa and rk3288 Asus Tinker boards. Error log snippet: Booting using the fdt blob at 0x1f00000 Loading Kernel Image ... Image too large: increase CONFIG_SYS_BOOTM_LEN Must RESET board to recover resetting ... Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-24gitlab-ci: Update Docker image to xenial-20190720-24Jul2019 tagTom Rini
- Add in lzma-alone for current binman tests - Update to Ubuntu's xenial-20190720 tag (latest). Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-24gitlab-ci: Add pyelftools to the binman testsuite sectionTom Rini
We need pyelftools here to run rather than skip some tests. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-24Merge tag 'dm-pull-24jul19-take3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm Minor driver-model fixes and tweaks A few device-tree fixes Binman support for extracting files from an image
2019-07-24dm: device: make power domain calls optionalAnatolij Gustschin
Reduce power domain calls when CONFIG_POWER_DOMAIN is disabled. With gcc v8.2, this change saves 104 bytes. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
generated by cgit (git 2.34.1) at 2025-01-24 16:19:01 +0000