summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-28x86: Display basic CPU information on bootSimon Glass
Display the type of CPU (x86 or x86_64) when starting up. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28x86: Bring in msr-index.h from linux 3.8Simon Glass
Update this file to include x86_64 fields. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28x86: Move paging functions into cpu.cSimon Glass
These functions really don't belong in physmem as they relate to the cpu. Move them. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28ppc/arm: zap EMK boardsWolfgang Denk
The following bard configurations have been without active maintenance for a long time, and the board maintainer agrees to have them removed: MPC5200: TOP5200, MINI5200, EVAL5200 MPC860: TOP860 at91sam9xeXXX: top9000eval_xe, top9000su_xe Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de> [trini: Add missing Kconfig removals] Signed-off-by: Tom Rini <trini@ti.com>
2014-10-28doc/README.scrapyard: update commit IDsWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2014-10-28dwc_ahsata: use bitwise operator in sata_port_statusNikita Kiryanov
The logic of the return statement in sata_port_status() calls for a bitwise 'AND' operator, not logical 'AND'. Fix the typo. Reported-by: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2014-10-28Merge git://git.denx.de/u-boot-dmTom Rini
2014-10-28e1000: add i211 and unprogrammed i210/i211 supportMarcel Ziswiler
This patch adds support for i211 as well as unprogrammed aka tools only i210/i211 chip support. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2014-10-27odroid: dts: fix name of included dtsiPrzemyslaw Marczak
Odroid is based on Exynos4412. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27odroid: dts: adjust sd cd-gpios for SD CardPrzemyslaw Marczak
There is no gaps in exynos gpio enum after rework, so the gpio numbers should be adjusted to the new numbering. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27trats2: dts: adjust gpio numbers after gpio reworkPrzemyslaw Marczak
There is no gaps in exynos gpio enum after rework, so the gpio numbers should be adjusted to the new numbering. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27trats: dts: adjust gpio numbers to new apiPrzemyslaw Marczak
There is no gaps in exynos gpio enum after rework, so the gpio numbers should be adjusted to the new numbering. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27universal: dts: adjust gpio numbers to new apiPrzemyslaw Marczak
There is no gaps in exynos gpio enum after rework, so the gpio numbers should be adjusted to the new numbering. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27universal: request soft i2c gpioPrzemyslaw Marczak
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27exynos4210: dts: fix gpio offset in pinctrl-ubootPrzemyslaw Marczak
The gpy0 don't need any additional register offset, but the gpx0 does, so now it is fixed. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27exynos4412: dts: adjust pinctrl-uboot to changed gpio orderPrzemyslaw Marczak
The gpf0 offset was bad and it's now fixed. After fix gpio order in *pinctrl.dts , the gpy0 offset is not required now. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27exynos4412: dts: fix bad gpio order in pinctrlPrzemyslaw Marczak
The pinctrl dts was imported from the kernel, but the order of GPM and GPY is wrong. The gpio enum in: asm/arch/gpio.h is proper. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27exynos: common: enable generic fs operationsPrzemyslaw Marczak
This config is required by Odroid, and could be also useful for the other boards. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27mmc: s5p: set SD detection pin as inputPrzemyslaw Marczak
The SD Card slot detection pin should be configured as input. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27git-mailrc: add pmic custodianPrzemyslaw Marczak
This adds custodian to the pmic subsystem. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Tom Rini <trini@ti.com>
2014-10-27gitignore: ignore atmel pmecc parameter toolAndreas Bießmann
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-10-27spl: move comment to the right placeAndreas Bießmann
Commit ae83d882f5fdf7aa7c5aec09cfafb593153c25d6 moved the fixed size mentioned in the comment but missed the comment. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-10-27Use __stringify() instead of xstr()Anatolij Gustschin
Some boards still use xstr(). Replace remaining occurrences of xstr() by commonly used __stringify(). Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-10-27ppc4xx: update PMC440 board supportMatthias Fuchs
- switch to GENERIC_BOARD - fix env support from eeprom Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
2014-10-27image: Fix Android boot image supportAhmad Draidi
This patch makes the following changes: - Set kernel entry point correctly - Append bootargs from image to global bootargs instead of replacing them - Return end address instead of size from android_image_get_end() - Give correct parameter to genimg_get_format() in boot_get_ramdisk() - Move ramdisk message printing from android_image_get_kernel() to android_image_get_ramdisk() Signed-off-by: Ahmad Draidi <ar2000jp@gmail.com> Cc: Tom Rini <trini@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2014-10-27arm: db-mv784mp-gp/maxbcm Add placeholder bin_hdr file so that linking worksStefan Roese
This file should contain the bin_hdr generated by the original Marvell U-Boot implementation. As this is currently not included in this U-Boot version, we have added this placeholder, so that the U-Boot image can be generated without errors. If you have a known to be working bin_hdr for your board, then you just need to replace this text file here with the binary header and recompile U-Boot. In a few weeks, mainline U-Boot will get support to generate the bin_hdr with the DDR training code itself. By implementing this code as SPL U-Boot. Then this file will not be needed any more and will get removed. Signed-off-by: Stefan Roese <sr@denx.de>
2014-10-27cmd_mem: call unmap_sysmem() after map_sysmem()Masahiro Yamada
Actually, unmap_sysmem() does nothing. Just in case. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27common: command: trivial coding style fixesMasahiro Yamada
- Do not insert a whitespace between a function name and an open paranthesis - Fix comment style - Do not split an error message into multiple lines even if it exceeds 80 columns - Do not split "for" statement where it fits in 80 columns - Do not use assignment in if condition Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27Correct two non-functional misspellings "overrided".Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2014-10-27Correct single misspelling of "consitant" in source tree.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2014-10-27doc: fix README.standaloneMasahiro Yamada
Since commit fe1378a961e5 (ARM: use r9 for gd), r9 register is used on ARM to hold global_data. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-27e1000: fix sw fw sync on igb i210/i211Marcel Ziswiler
I finally had a look at the datasheet and spotted an additional register address difference between regular E1000 and i210/i211 chips. This patch fixes this and now successfully works on programmed i210/i211 as well as unprogrammed i211. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2014-10-27README.kconfig: fix typoIgor Grinberg
Fix typo in defconfig file format description. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-27kconfig: add CONFIG_SUPPORT_TPLMasahiro Yamada
CONFIG_TPL should not be enabled for boards that do not have TPL. CONFIG_SUPPORT_TPL introduced by this commit should be "select"ed by boards with TPL support and CONFIG_TPL should depend on it. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-27kconfig: add CONFIG_SUPPORT_SPLMasahiro Yamada
CONFIG_SPL should not be enabled for boards that do not have SPL. CONFIG_SUPPORT_SPL introduced by this commit should be "select"ed by boards with SPL support and CONFIG_SPL should depend on it. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27common/cmd_io.c: Fix incorrect help for iod/iowBin Meng
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27net/e1000: Fix EEPROM access errorYork Sun
Commit 951860634fdb557bbb58e0f99215391bc0c29779 may have changed the logic unintentially from "if (!(swfw_sync & (fwmask | swmask)))" to "if ((swfw_sync & swmask) && !(swfw_sync & fwmask))". This change breaks some e1000 NIC with a message "ERROR: Unable to read EEPROM!". Signed-off-by: York Sun <yorksun@freescale.com> CC: Marek Vasut <marex@denx.de> CC: Tim Harvey <tharvey@gateworks.com> Acked-by: Marcel Ziswiler <marcel@ziswiler.com>
2014-10-27aboot: fix block addressing for don't care chunk typeRob Herring
CHUNK_TYPE_DONT_CARE should skip over the specified number of blocks, but currently fails to increment the device block address. This results in filesystem images getting written incorrectly. Add the missing block address incrementing. Cc: Steve Rae <srae@broadcom.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Steve Rae <srae@broadcom.com>
2014-10-27TI:OMAP4: enable EXT support in SPL for OMAP4 boardsGuillaume GARDET
Enable EXT support in SPL for OMAP4 boards. Build tested for duovero, omap4_sdp4430 and omap4_panda. Run time tested on omap4_panda. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
2014-10-27spl: do not hang in spl_register_fat_device but return error value. It ↵Guillaume GARDET
allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT. Do not hang in spl_register_fat_device but return an error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT. If FAT load fails, then EXT load is tried. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
2014-10-27doc: Update documentation according to the EXT SPL support patch setGuillaume GARDET
Update documentation according to the EXT SPL support patch set. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
2014-10-27spl: Add EXT support to SPLGuillaume GARDET
Add EXT filesystem support to SPL. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> [trini: Fix a warning and checkpatch problems] Signed-off-by: Tom Rini <trini@ti.com>
2014-10-27SPI: mxc_spi: delay initialisation until claim busMarkus Niebel
it is not correct to init for a specific slave in spi_setup_slave. instead buffer the values and delay init until spi_claim_bus. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Acked-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27SPI: mxc_spi: remove second reset from ECSPI config handlerMarkus Niebel
the second reset prevents other registers to be written. This will prevent to have the correct signal levels for SCLK before writing to the config reg in spi_xchg_single. Tested with GPIO based chipselect and SPI_MODE_3 on i.MX6S Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Acked-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Move the config options to the topMarek Vasut
Just move the configuration options scattered all over the driver to the top of the source file. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Add short note about EPCS/EPCQx1Marek Vasut
Add short documentation-alike note on how to use the Altera SPI driver with the EPCS/EPCQx1 FPGA IP block on SoCFPGA Cyclone V into doc/SPI/README.altera_spi Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Clean up the use of variable dMarek Vasut
The variable d is used in rather questionable way. Rework the code a bit so it's clearer what it does. Also, rename the variable from d to data to make it's name less mysterious. Finally, change it's data type to uint32_t , since it's accessed as a 32bit number. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Zap endless loopMarek Vasut
The driver contained an endless loop when waiting for TX completion, this is a bad idea since if the hardware fails, the loop might spin forever. Add timeout and handle it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Clean up most checkpatch issuesMarek Vasut
This patch just zaps most of the checkpatch cries present in the driver. There is one more left, which will be addressed separately. There is no functional change. This patch also adds a bunch of newlines all around the place, this is to make the code much more readable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Clean up bit definitionsMarek Vasut
Clean up the definitions of bits in the Altera SPI driver, there is no need to put braces around numbers afterall. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-04 11:14:25 +0000