summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-07dt/bindings: add bindings for opteeJens Wiklander
Sync with c8bfafb15944 ("dt/bindings: add bindings for optee") from Linux kernel. Introduces linaro prefix and adds bindings for ARM TrustZone based OP-TEE implementation. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07Add UCLASS_TEE for Trusted Execution EnvironmentJens Wiklander
Adds a uclass to interface with a TEE (Trusted Execution Environment). A TEE driver is a driver that interfaces with a trusted OS running in some secure environment, for example, TrustZone on ARM cpus, or a separate secure co-processor etc. The TEE subsystem can serve a TEE driver for a Global Platform compliant TEE, but it's not limited to only Global Platform TEEs. The over all design is based on the TEE subsystem in the Linux kernel, tailored for U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07mmc: rpmb: add mmc_rpmb_route_frames()Jens Wiklander
Adds mmc_rpmb_route_frames() to route RPMB data frames from/to an external entity. Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-07cmd: avb: print error message if command failsJens Wiklander
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07cmd: avb read_rb: print rb_idx in hexadecimalJens Wiklander
Prior to this patch was do_avb_write_rb() reading supplied rb_idx as a hexadecimal number while do_avb_read_rb() printed the read out rb_idx as decimal number. For consistency change do_avb_read_rb() to print rb_idx as a hexadecimal number too. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07dm: fdt: scan for devices under /firmware tooJens Wiklander
Just as /chosen may contain devices /firmware may contain devices, scan for devices under /firmware too. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-06spl: spi: Do not hardcode fixed size for headerMichal Simek
Find out size directly from header structure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-06spl: ram: Fix u_boot_pos calculationMichal Simek
The patch: "spl: Weed out CONFIG_SYS_TEXT_BASE usage" (sha1: 04ce5427bd3914cab8be78513275a20ab878520a) introduced bug where assigning to u_boot_pos variable wasn't done which end up in situation where SPL wasn't able to find out image on the selected address. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-06mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7Patrice Chotard
This allows to boot all STM32F7 and STM32H7 boards independently of the amount of embedded SDRAM. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-10-06fs: fat: fix set_cluster()Heinrich Schuchardt
Avoid CoverityScan warning SIGN_EXTENSION by changing the type of parameter size of set_cluster(). Avoid leaking stack content when writing an incomplete last sector. Reported-by: Coverity (CID: 184096) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-06fs: fat: memory leak in fat_unlink()Heinrich Schuchardt
Do not leak filename_copy in case of error. Catch out of memory when calling strdup. Reported-by: Coverity (CID: 184086) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-06ARM: LogicPD: omap3logic: Remove Torpedo/SOM-LV autodectionAdam Ford
With there now being four device tree files, and 4 separate defconfig files, the code necessary to determine which board is being used is no longer necessary as the corresponding pin-muxing and board names are determined by the device tree. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 TorpedoAdam Ford
With the device trees doing most of the work of pin-muxing and DM doing much of the peripheral initialization, this creates new defconfig files for each of the Logic PD variants with proper register settings/pin-muxing. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update MAINTAINERS entry] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-06ARM: DTS: Add support for Logic PD OMAP35 Torpedo & SOM-LVAdam Ford
The baseboards and SOM's are virtually identical to their DM37 counterparts, but OMAP36/37 and OMAP3 have some minor register differences. With the boards being mostly driven by device trees now, this synchronizes their respective device trees with linux-omap for-next branch destined for 4.20 (or whatever the version after 4.19 will be called) Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06ARM: DTS: Remove unnecessary u-boot.dtsi options from omap3/36xxAdam Ford
With the introduction of the omap serial driver, the need for some of these U-Boot specific modifications is gone. This cleans up this unnneeded stuff. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with KernelAdam Ford
The device tree entries are from linux-omap's for-next branch destined to me put into 4.20 (or whatever the version is after 4.19) Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06misc: Add support for the Arm Versatile Express config busLiviu Dudau
Add support for the Arm Versatile Express config bus that is being used for exposing various subsystems via a generic configuration bus. This driver adds support for generating transactions on this configuration bus and can be used by other drivers to abstract the communication with the actual function providers. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-10-06configs: drop CONFIG_SYS_EXTRA_ENV_RELOCSimon Goldschmidt
Instead of manually specifying CONFIG_SYS_EXTRA_ENV_RELOC for every board that needs it, it shouldn't hurt to let initr_reloc_global_data() always relocate gd->env_addr unless we know this pointer is outside the initial binary. To achieve this, the relocation is omitted if CONFIG_ENV_ADDR is defined (and ENV_IS_EMBEDDED is not). Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-10-06test/py: test_fs: add docstring comments to helper functionsAkashi Takahiro
After Siomon's comment, add a descriptive comment (docstring) to each of helper functions in conftest.py. No functionality changed. Signed-off-by: Akashi Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-06test/py: test_fs: remove fs_type argument from umount_fs()Akashi Takahiro
Since there is no use of fs_type in umount_fs(), just remove it. Signed-off-by: Akashi Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-06test/py: ignore console read exceptions after test failureStephen Warren
After a test has failed, test/py drains the U-Boot console log to ensure that any relevant output is captured. At this point, we don't care about detecting any additional errors, since the test is already known to have failed, and U-Boot will be restarted. To ensure that the test cleanup code is not interrupted, and can correctly terminate the log sections for the failed test, ignore any exception that occurs while reading the U-Boot console output during this limited period of time. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2018-10-05Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-10-05Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2018-10-05Merge tag 'rockchip-for-v2018.11-rc2' of git://git.denx.de/u-boot-rockchipTom Rini
Rockchip-focused changes for v2018.11-rc2: - fixes to rkimage for SPL boot via USB - fixes to make_fit_atf.py, incl. entry-point calculation and python3 compatibility - OP-TEE support for ARMv7-based SoCs - fixes to RGMII/GMII selection on the RK3328 Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-05Merge tag 'arc-updates-for-2018.11-rc2' of git://git.denx.de/u-boot-arcTom Rini
Here we do a couple of impovements for all ARC boards as well as introduce yet another developemnt board. 1. Now for ARC boards we print CPU and board info which is useful for users and helps with analysis of logs "post-mortem". 2. Synopsys IoT development kit support is added This one might bw a bit too late as we're past RC1 but: 1) This doesn't affect any other arches etc as we change purely ARC code. 2) I've got a chance to talk about U-Boot on IoT platforms during ELCE (my proposal was on a wait list and only this week I've got an update and invitation to talk) so it would be good to have this board as a primer in upstream code-base by the time of ELCE 2018. 3) For complete support of IoT devkit I'm yet to significantly rework regmap subsystem in U-Boot but that's a different topic and hopefully it will be done sometime soon... though not this release cycle for sure.
2018-10-05arc: Add support for IoT development kitAlexey Brodkin
The DesignWare ARC IoT Development Kit is a versatile platform that includes the necessary hardware and software to accelerate software development and debugging of sensor fusion, voice recognition and face detection designs. More information is avaialble here [1] and here [2]. The board is based on real silicon with ARC EM9D-based Data Fusion IP Subsystem. It sports a rich set of I/O including * DW USB OTG * DW MobileStorage (used for micro SD-card) * GPIO * multiple serial interface including DW APB UART * ADC, PWM and eFlash, SRAM and SPI Flash memory * Real-Time Clock (RTC) * Bluetooth module with worldwide regulatory compliance (FCC, IC, CE, ETSI, TELEC) * On-board 9-axis sensor (gyro, accelerometer and compass) Extensible with Arduino, Pmod, mikroBUS connectors and a 2x18 extension header. One of the most interesting features for developers is built-in Digilent USB JTAG probe so only micro-USB cable is needed! [1] https://www.synopsys.com/dw/ipdir.php?ds=arc_iot_development_kit [2] https://www.synopsys.com/dw/doc.php/ds/cc/iot_dev_kit.pdf Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Enable DISPLAY_CPUINFO & DISPLAY_BOARDINFOAlexey Brodkin
With implemented print_cpuinfo() and model property in .dts we're ready to print nice info about ARC cores and boards on boot. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Implement print_cpuinfo()Alexey Brodkin
Once we enable DISPLAY_CPUINFO for ARC we'll see ARC core family and version printed on boot. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Add model property to boards .dtsAlexey Brodkin
1. This way we sync with Linux kernel where we have model set for all ARC boards for quite some time, see [1] 2. Once we enable DISPLAY_BOARDINFO for ARC this info will be printed on boot givin some extra data-point about the board [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=618a9cd06dd471ac232f5b27325b24d26eba5571 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Don't pre-define CROSS_COMPILEAlexey Brodkin
Even though arc-linux- prefix is used in ARC prebuilt tools and in Buildroot there're other options like Linux distro cross-tools etc where prefix is different so let's not rely on this default. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-04rockchip: Fix rkimage format for SPL boot over USBDaniel Gröber
The 'rkimage' format used for booting rockchip boards over USB seems to have been broken since commit 7bf274b9caab ("rockchip: mkimage: use imagename to select spl hdr & spl size"). That commit adds an offset of RK_SPL_HDR_START(=2048) to the location the 'RKxx' header is written at. However the bootrom expects this header to be the first four bytes of the image, not at offset 2048. This appears to have been a copy paste error since the 'rksd' and 'rkspi' image types do require this offset. Furthermore commit 111bcc4fb6cb ("rockchip: mkimage: pad the header to 8-bytes (using a 'nop') for RK3399"), commit 3d54eabcafec9 ("rockchip: spl: RK3399: use boot0 hook to create space for SPL magic") and commit 308277569229 ("rockchip: mkimage: update rkimage to support pre-padded payloads") changed the way the space for the 'RKxx' header is allocated and written to the image without adjusting 'rkimage'. This commit fixes those mistakes and makes it possible to load u-boot SPL over USB once more. (Tested on RK3399) Signed-off-by: Daniel Gröber <daniel@dps.uibk.ac.at> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04rockchip: make_fit_atf.py depends on u-bootAndreas Färber
u-boot.itb depends on u-boot-nodtb.bin, which in turn depends on u-boot. u-boot.its from Rockchip make_fit_atf.py (used by {evb,firefly}-rk3399) wants to read u-boot but is lacking this dependency, so that u-boot.itb cannot be built in one go. Detect its use and add the missing dependency. Reported-by: Yousaf Kaukab <yousaf.kaukab@suse.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04net: gmac_rockchip: Add handling for RGMII_ID/RXID/TXIDJanine Hagemann
Using PHY internal delays in combination with the phy-mode rgmii-id/rxid/txid was not possible. Only rgmii was supported. Now we can disable rockchip's gmac delay lines and also use rgmii-id/rxid/txid. Based on commit eaf70ad14cbb ("net: stmmac: dwmac-rk: Add handling for RGMII_ID/RXID/TXID") for mainline linux kernel. Signed-off-by: Janine Hagemann <j.hagemann@phytec.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04net: gmac_rockchip: Fix a register write in rk3328_gmac_set_to_rgmiiJanine Hagemann
We have to use RK3328_RXCLK_DLY_ENA_GMAC_ENABLE instead of RK3328_RXCLK_DLY_ENA_GMAC_MASK in rk3328_gmac_set_to_rgmii() to enable the RX delay. The MASK was used in a wrong way. Signed-off-by: Janine Hagemann <j.hagemann@phytec.de> Reviewed-by: Philipp Tomisch <philipp.tomisch@theobroma-systems.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-04rockchip: make_fit_atf: make python3 compatibleMian Yousaf Kaukab
Make script python3 compatible. No functional changes intended. Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04rockchip: make_fit_atf: use elf entry pointMian Yousaf Kaukab
make_fit_atf.py uses physical address of first segment as the entry point to bl31. It is incorrect and causes following abort when bl31_entry() is called: U-Boot SPL board initTrying to boot from MMC1 "Synchronous Abort" handler, esr 0x02000000 elr: 0000000000000000 lr : 00000000ff8c7e8c x 0: 00000000ff8e0000 x 1: 0000000000000000 x 2: 0000000000000000 x 3: 00000000ff8e0180 x 4: 0000000000000000 x 5: 0000000000000000 x 6: 0000000000000030 x 7: 00000000ff8e0188 x 8: 00000000000001e0 x 9: 0000000000000000 x10: 000000000007fcdc x11: 00000000002881b8 x12: 00000000000001a2 x13: 0000000000000198 x14: 000000000007fdcc x15: 00000000002881b8 x16: 00000000003c0724 x17: 00000000003c0718 x18: 000000000007fe80 x19: 00000000ff8e0000 x20: 0000000000200000 x21: 00000000ff8e0000 x22: 0000000000000000 x23: 000000000007fe30 x24: 00000000ff8d1c3c x25: 00000000ff8d5000 x26: 00000000deadbeef x27: 00000000000004a0 x28: 000000000000009c x29: 000000000007fd90 Fix it by using the entry point from the elf header. Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04rockchip: add fit source file for pack itb with op-teeKever Yang
We package U-Boot and OP-TEE into one itb file for SPL, so that we can support OP-TEE in SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04spl: add support to booting with OP-TEEKever Yang
OP-TEE is an open source trusted OS, in armv7, its loading and running are like this: loading: - SPL load both OP-TEE and U-Boot running: - SPL run into OP-TEE in secure mode; - OP-TEE run into U-Boot in non-secure mode; To make code simple, it would be fine to use IH_OS_TEE for the os tyle in TPL(just like IH_OS_LINUX is using both in SPL and U-Boot). Here is the diagram for SPL loading OP-TEE, IH_OS_TEE:(make u-boot.itb for SPL) Non-Secure Secure BootROM | v SPL | v --------- OP-TEE | v U-Boot | V Linux For other two king of OP-TEE loading/booting, see commit message: 45b55712d4 image: Add IH_OS_TEE for TEE chain-load boot More detail: https://github.com/OP-TEE/optee_os and search for 'boot arguments' for detail entry parameter in: core/arch/arm/kernel/generic_entry_a32.S Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04rockchip: make_fit_atf: fix warning unit_address_vs_regKever Yang
Patch fix warning: /builddir/BUILD/u-boot-2018.05-rc2/"arch/arm/mach-rockchip/make_fit_atf.py" \ arch/arm/dts/rk3399-firefly.dtb > u-boot.its ./tools/mkimage -f u-boot.its -E u-boot.itb >/dev/null && cat /dev/null u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf@2 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf@3 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /configurations/config@1 has a unit name, but no reg property make[1]: Leaving directory '/builddir/BUILD/u-boot-2018.05-rc2/builds/firefly-rk3399' Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2018-10-04spi: Add SPI driver for MT76xx SoCsStefan Roese
This patch adds the SPI driver for the MediaTek MT7688 SoC (and derivates). Its been tested on the LinkIt Smart 7688 and the Gardena Smart Gateway with and SPI NOR on CS0 and on the Gardena Smart Gateway additionally with an SPI NAND on CS1. Note that the SPI controller only supports a max transfer size of 32 bytes. This driver implementes a workaround to enable bigger xfer sizes to speed up the transfer especially for the SPI NAND support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Jagan Teki <jagan@openedev.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Piotr Dymacz <pepe2k@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-10-04mtd: nand: spi: Add Gigadevice SPI NAND supportStefan Roese
This patch adds support for Gigadevices SPI NAND device to the new SPI NAND infrastructure in U-Boot. Currently only the 128MiB GD5F1GQ4UC device is supported. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Jagan Teki <jagan@openedev.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-10-04sf: Add XMC xm25qh64a and xm25qh128a entriesStefan Roese
This patch adds support for 2 new XMC (Wuhan Xinxin Semiconductor Manufacturing Corp) SPI NOR chips. This support can be enabled by selecting the SPI_FLASH_XMC Kconfig option. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-10-03Merge tag 'rockchip-for-v2018.11' of git://git.denx.de/u-boot-rockchipTom Rini
Rockchip changes for 2018.11
2018-10-03Merge git://git.denx.de/u-boot-riscvTom Rini
- QEMU support
2018-10-03Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini
Add support for the Arm's Versatile Express I2C controller.
2018-10-03arm: socfpga: stratix10: add sgmii in phymode setupOoi, Joyce
Additional sgmii phymode is added in socfpga_phymode_setup() along with a minor fix for maximum number of GMACs. Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
2018-10-03arm: socfpga: Remove unused function socfpga_emac_manage_reset()Ley Foon Tan
Remove code from the reset manager that is never called. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-10-03tools: socfpga: fix sfp_verify_headerAtsushi Nemoto
Fix sfp_verify_header to return correct version number. This fixes "Not a sane SOCFPGA preloader" error message with v1 header. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
2018-10-03gpio: dwapb_gpio: Change to use devm_kcalloc()Ley Foon Tan
Change to use managed resource function devm_kcalloc(), so it will auto free memory when driver is removed. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
generated by cgit (git 2.34.1) at 2024-12-26 04:11:09 +0000