summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-16MAINTAINERS: Fix mailSam Protsenko
Sam doesn't work for Linaro anymore, so Linaro mail is not valid. Change it to his home mail instead. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
2020-01-16cmd/blk_common: clarify no partition error messageAlexandre Besnard
When no partition table is found, users should be warned so. Warning that no device is available in this case could be misleading, especially as it is the same error when no device is selected. Signed-off-by: Alexandre Besnard <alexandre.besnard@softathome.com>
2020-01-16arm: mvebu: clearfog: update eMMC documentationBaruch Siach
SPL now automatically selects the correct U-Boot image offset for both eMMC and SD card. No need to tweak CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16arm: mvebu: clearfog: set uboot image SD card offsetBaruch Siach
Armada 38x ROM skips the first SD card offset when loading SPL. This affects the location of the main U-Boot image. SPL MMC code now supports U-Boot image offset based on run-time detection of the boot partition. Use this feature to make the same generated image support both SD card and eMMC boot partition. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16spl: mmc: support uboot image offset on main partitionBaruch Siach
On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC hardware boot partitions. When there are no boot partitions (i.e. SD card) the ROM skips the first sector that usually contains the (logical) partition table. Since the generated .kwb image contains the main U-Boot image in a fixed location (0x140 sectors by default), we end up with the main U-Boot image in offset of 1 sector. The current workaround is to manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to compensate for that. This patch uses the run-time detected boot partition to determine the right offset of the main U-Boot partition. The generated .kwb image is now compatible with both eMMC boot partition, and SD card main data partition. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16configs: clearfog: enable SPL_DM_GPIO to fix boot from SDBaruch Siach
SPL needs DM GPIO to read the SD card-detect signal. This complements the fix in commit 70bae02f71d4 ("arm: mvebu: clearfog: fix boot from SD card"). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16mmc: config help typo fixJoel Johnson
Fix typo in description of MMC_QUIRKS config option. Signed-off-by: Joel Johnson <mrjoel@lixil.net>
2020-01-16mmc: add additional quirk for APP_CMD retryJoel Johnson
It was observed (on ClearFog Base) that sending MMC APP_CMD returned an error on the first attempt. The issue appears to be timing related since even inserting a puts() short debug entry before the execution added sufficient delay to receive success on first attempt. Follow the existing quirks pattern to retry if initial issuance failed so as to not introduce any delay unless needed. Signed-off-by: Joel Johnson <mrjoel@lixil.net>
2020-01-16Drop CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK usageYangbo Lu
The eSDHC reference clocks should be provided by speed.c in arch/. And we do not need CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK option to select which clock to use. Because we can make the driver to select the periperhal clock which is better (provides higher frequency) automatically if its value is provided by speed.c. This patch is to drop this option and make driver to select clock automatically. Also fix peripheral clock calculation issue in fsl_lsch2_speed.c/fsl_lsch3_speed.c. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16configs: ls1028a: use default SDHC clock divider valueYangbo Lu
The SDHC clock divider value for LS1028A should be default 2, not 1. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16Add global variable sdhc_per_clk for arm/powerpcYangbo Lu
The QorIQ eSDHC controller supports two reference clocks. They are platform clock and periperhal clock. The global variable sdhc_clk has already been used for platform clock. This patch is to add another global variable sdhc_per_clk for periperhal clock, which provides higher frequency and is required to be used for SD UHS and eMMC HS200/HS400 speed modes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16powerpc/mpc85xx: drop eSDHC periperhal clock codeYangbo Lu
The below patch added eSDHC periperhal clock code initially. 2d9ca2c mmc: fsl_esdhc: Add peripheral clock support The purpose was to fix up device tree properties "peripheral-frequency" so that linux could get the periperhal clock by it. However the implementation on both u-boot and linux was only for a Freescale SDK release. The linux part implementation had never been upstreamed. These code should not have been exist on u-boot mainline. Let's remove the powerpc part changes but keep the changes in fsl_esdhc driver. The changes in fsl_esdhc driver could be utilized to support SD UHS and eMMC HS200/HS400 speed modes for current Layerscape ARM platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16mmc: fsl_esdhc: drop useless fdt fixupYangbo Lu
The fdt fixup for properties "peripheral-frequency" and "adapter-type" was once for a Freescale SDK release. The properties haven't been existed in linux mainline. Drop these useless code. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16mmc: fsl_esdhc_imx: drop QorIQ eSDHC specific peripheral clock codeYangbo Lu
Drop QorIQ eSDHC specific peripheral clock code. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-15test/py: use valid device tree in test_fit.pyHeinrich Schuchardt
The device tree compiler expects that a node with a unit-address has a reg property. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-15Add dependencies for MALLOC_F and OF_LIBFDTSean Anderson
Some features implicitly depended on MALLOC_F and OF_LIBFDT and would fail at link-time if these features were not enabled. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-15Include missing headers for asm-generic/sections.hSean Anderson
asm-generic/sections.h references ulong but does not include linux/types.h Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-15dma: Add stub of dma_memcpy and dma_get_deviceVignesh Raghavendra
Add stub for dma_memcpy() and dma_get_device when CONFIG_DMA is disabled. This avoids ifdefs in driver code using DMA APIs Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-15Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMAVignesh Raghavendra
Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-15Merge tag 'efi-2020-04-rc1-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc1-2 Bug fixes for the UEFI sub-system are provided: * imply VIDEO_ANSI for correct cursor positioning and colors * fix issues in the UEFI block device driver * add missing documentation
2020-01-15Merge tag 'u-boot-imx-20200115' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx ----------------------------------- - imx8: add capricorn giedi deneb boards - imx6: fixed fow wandboard - imx7: DM_ETHER for pico-imx7d - fsl_esdhc_imx: add broken-cd property - New SOC: IMXRT10xx Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/637126531
2020-01-14Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
- Important bugfix for some Tegra platforms
2020-01-15efi_loader: imply VIDEO_ANSIHeinrich Schuchardt
UEFI programs like GRUB make change terminal colors which requires support for ANSI escape sequences. Let CONFIG_EFI_LOADER=y imply CONFIG_VIDEO_ANSI. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_driver: debug output efi_uc_start, efi_uc_stopHeinrich Schuchardt
Use the correct printf codes for the debug output in efi_uc_start() and efi_uc_stop(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_driver: fix efi_uc_stop()Heinrich Schuchardt
Use the correct protocol in efi_uc_stop() when detaching the driver from the controller. Change the block IO unit test for the block device driver to throw an error instead of a todo if teardown fails. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_selftest: enable CONFIG_CMD_POWEROFFHeinrich Schuchardt
For automating testing we should be able to power off the test system. The implementation of EFI_RESET_SHUTDOWN requires the do_poweroff() function which is only available if CONFIG_CMD_POWEROFF=y. Enable CONFIG_CMD_POWEROFF if PSCI reset is available. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_loader: describe returning of controlHeinrich Schuchardt
Provide a sober description of how control can be returned by a UEFI binary. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_loader: document functions in efi_rng.cHeinrich Schuchardt
Add the missing Sphinx documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-14imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVKGiulio Benetti
This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14imx: Add basic support for the NXP IMXRT10xx SoC familyGiulio Benetti
Add i.IMXRT family basic support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14mmc: fsl_esdhc: add compatible for fsl, imxrt-usdhcGiulio Benetti
Add compatible "fsl,imxrt-usdhc" to make mmc working on i.MXRT platforms with CONFIG_DM_MMC=y. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14mmc: fsl_esdhc: make if(CONFIG_IS_ENABLED(CLK)) an #if statementGiulio Benetti
Not all architectures(i.e. i.MXRT) support mxc_get_clock() and use DM_CLK instead. So building could result in failure due to missing mxc_get_clock(). Make if(CONFIG_IS_ENABLED(CLK)) an #if statement. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14ram: add SDRAM driver for i.MXRT SoCsGiulio Benetti
Add SDRAM driver for i.MXRT SoCs. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14serial_lpuart: add support for i.MXRTGiulio Benetti
Add i.MXRT compatible string and cpu type support to lpuart driver, to use little endian 32 bits configurations. Also according to RM, the Receive RX FIFO Enable (RXFE) field in LPUART FIFO register is bit 3, so this definition should change to 0x08 as done for i.MX8. It needs also to set baudrate the same way as i.MX8 does. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14serial_lpuart: add clock enable if CONFIG_CLK is definedGiulio Benetti
This driver assumes that lpuart clock is already enabled before probing but using DM only lpuart won't be automatically enabled so add clk_enable() when probing if CONFIG_CLK is defined. If clock is not found, because DM is not used, let's emit a warning and proceed, because serial clock could also be already enabled by non DM code. If clock is found but cna't be enabled then return with error. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14ARM: dts: imxrt1050: add dtsi fileGiulio Benetti
Add dtsi file for i.MXRT1050. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14gpio: mxc_gpio: add support for i.MXRT1050Giulio Benetti
Add i.MXRT1050 support, there are 5 GPIO banks. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14pinctrl: add i.MXRT driverGiulio Benetti
Add i.MXRT pinctrl driver. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: add i.IMXRT1050 clk driverGiulio Benetti
Add i.MXRT1050 clk driver support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pfd: add set_rate()Giulio Benetti
Implement set_rate() for pfd. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add support for PLLV3_AV typeGiulio Benetti
Add support for PLLV3 AV type. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pllv3: add PLLV3_SYS supportGiulio Benetti
Add PLLV3_SYS support by adding set/get_rate() for PLLV3_SYS but keeping generic enable()/disable(). Add a different driver because ops are different respect to GENERIC/USB. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add set_rate() supportGiulio Benetti
Add generic set_rate() support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add disable() supportGiulio Benetti
Add disable() support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add enable() supportGiulio Benetti
Before set_rate() pllv3 needs enable() to power the pll up. Add enable() taking into account different power_bit and different powerup_set, because some pll needs its power_bit to be set or reset to be powered on. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pllv3: set div_mask differently if PLLV3 is GENERIC or USBGiulio Benetti
div_mask is different for GENERIC and USB pll, so set it according. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: register PLLV3 GENERIC and USB as 2 different clocksGiulio Benetti
Better to register the 2 clock as 2 different drivers because they work slightly differently depending on power_bit and powerup_set bits coming on next patches. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14armv7m: cache: add mmu_set_region_dcache_behaviour() stub for compatibilityGiulio Benetti
Since some driver requires this function add it as an empty stub when DCACHE is OFF. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14spl: fix entry_point equal to load_addrGiulio Benetti
At the moment entry_point is set to image_get_load(header) that sets it to "load address" instead of "entry point", assuming entry_point is equal to load_addr, but it's not true. Then load_addr is set to "entry_point - header_size", but this is wrong too since load_addr is not an entry point. So use image_get_ep() for entry_point assignment and image_get_load() for load_addr assignment. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14imx: dts: imx8dx: add I2C IPG clock for bus 0 and 2Anatolij Gustschin
IPG clock description is missing for I2C0 and I2C2 busses, add it. Otherwise we see -ENODATA error when trying to get I2C clock for these busses. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
generated by cgit (git 2.34.1) at 2024-12-29 15:10:30 +0000