summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-04efi_loader: variable: support non-volatile attributeAKASHI Takahiro
The attribute, EFI_VARIABLE_NON_VOLATILE, should be encoded as "nv" flag in U-Boot variable if specified. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04efi_loader: notify memory map changesHeinrich Schuchardt
When the memory map is changed signal events of the EFI_EVENT_GROUP_MEMORY_MAP_CHANGE event group. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04cmd: env: print a message when setting UEFI variable failedAKASHI Takahiro
Error message will alert a user that setting/deleting a variable failed. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04efi_loader: bootmgr: print a message when loading from BootNext failedAKASHI Takahiro
If a user defines BootNext but not BootOrder and loading from BootNext fails, you will see only a message like this: BootOrder not defined This may confuse a user. Adding an error message will be helpful. An example output looks like this: => efidebug boot add 0001 label1 scsi 0:1 "\path1\file1.efi" "--option foo" => efidebug boot add 0002 label2 scsi 0:1 "\path2\file2.efi" "--option bar" => efidebug boot add 0003 label3 scsi 0:1 "\path3\file3.efi" "--option no" => efidebug boot order 0001 0002 => efidebug boot next 0003 => bootefi bootmgr Loading from Boot0003 'label3' failed Loading from BootNext failed, falling back to BootOrder Loading from Boot0001 'label1' failed Loading from Boot0002 'label2' failed EFI boot manager: Cannot load any image Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Adjust messages. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04efi_loader: close protocols in UnloadImage()Heinrich Schuchardt
When UnloadImage() is called all protocols opened by the image have to be closed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04efi_loader: fix EnableCursor()Heinrich Schuchardt
The EnableCursor() service of the simple text output protocol must update the the CursorVisible field of the output mode. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04efi_loader: check timer events in Stall()Heinrich Schuchardt
During a call to Stall() we should periodically check for timer events. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04lib: time: export usec_to_tick()Heinrich Schuchardt
In the UEFI Stall() boottime service we need access to usec_to_tick(). Export the function. Remove redundant implementation in arch/arm/mach-rockchip/rk_timer.c. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04efi_loader: DisconnectController() with no driverHeinrich Schuchardt
If DisconnectController() is called and no driver is managing ControllerHandle, return EFI_SUCCESS. UEFI SCT II 2017, 3.3.12 DisconnectController(), 5.1.3.12.4 - 5.1.3.12.6 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-31Merge tag 'rockchip-for-v2019.07-rc3' of git://git.denx.de/u-boot-rockchipTom Rini
- some fix for rk3399-puma; - rockchip script make_fit_atf.py cleanup - Enable TPL for rk3399 orangepi and nanopi4; - add support for rk3399 boards: Nanopi NEO4, Rockpro64, Rock PI 4;
2019-05-31Merge tag 'u-boot-amlogic-20190531' of git://git.denx.de/u-boot-amlogicTom Rini
- Sync DT with Linux 5.2-rc1 for G12A - Add USB clock support that was introduced in 5.2-rc1 bindings - Add currently in-review for Linux eMMC & USB DT for G12A in -u-boot.dtsi - Fix PHY routing to external PHY when chainloading from a misconfigred bootloader - Remove useless PHY GPIO reset from q200 board file - Enable USB support for Amlogic U200 reference board
2019-05-31configs: u200: enable support for USB Host & GadgetNeil Armstrong
Now the Amlogic G12A DT and drivers are present, enable full USB on the U200 Reference Design board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-31boards: amlogic-g200: remove phy resetNeil Armstrong
The PHY reset is now handled by the MAC driver, remove this leftover. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-31ARM: meson-gx: Reset GXL/GXM to external PHY when not using internal PHYNeil Armstrong
When using External PHY, reset the mux to use the external PHY in case U-Boot was chainloaded from a misconfigured bootloader. Fixes: 33e3378091 ("ARM: meson: rework soc arch file to prepare for new SoC") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-31ARM: dts: Add missing DT for Meson G12A supportNeil Armstrong
The following DT nodes in the process on review for Linux 5.3, until Linux 5.3 is tagged, add the missing DT nodes in u-boot specific DTSI files that will be dropped when the v5.3-rc1 DT is synced again. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-31clk: meson-g12a: Add PCIE PLL supportNeil Armstrong
The G12A PCIE PLL clock was introduced in Linux 5.2-rc1, and is needed for USB to operate, add basic support for it and associated gates. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-31ARM: dts: sync Amlogic G12A DT with Linux 5.2-rc1Neil Armstrong
Sync from Linux commit a188339ca5a3 ("Linux 5.2-rc1") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-30doc: rockchip: Add doc for rk3399 TPL build/flashJagan Teki
This patch add documentation for TPL build and flashing steps for rk3399 boards. Add full boot log for future reference. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-30rk3399: nanopi4: Enable TPLJagan Teki
Enable TPL for NanoPC T4, NanoPI M4 boards. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-30rk3399: orangepi: Enable TPLJagan Teki
Enable TPL for OrangePI rk3399 board. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-30rockchip: rk3399: Add Rock PI 4 supportJagan Teki
Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: rk3399: Add Rockpro64 board supportJagan Teki
Add initial support for Rockpro64 board. Specification - Rockchip RK3399 - 2/4GB Dual-Channel LPDDR3 - SD card slot - eMMC socket - 128Mb SPI Flash - Gigabit ethernet - PCIe 4X slot - WiFI/BT module socket - HDMI In/Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 12V/2A Commit details of rk3399-rockpro64.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: rockpro64 dts add usb regulator" (sha1: 6db644c79c8d45d73b56bc389aebd85fc3679beb) 'Akash' has sent an initial patch before, so I keep him as board maintainer and I'm co-maintainer based on our conversation. Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: rk3399: Add Nanopi NEO4 board supportJagan Teki
Add initial support for Nanopi NEO4 board. Specification - Rockchip RK3399 - 1GB DDR3-1866 - SD card slot - eMMC Socket - RTL8211E 1Gbps - AP6212 WiFI/BT - HDMI In/Out, DP, MIPI CSI - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 5V/3A Commit details of rk3399-nanopi-neo4.dts sync from Linux: "arm64: dts: rockchip: Add Nanopi NEO4 initial support" (sha1: 092470b537f19788d957aed12d835a179b606014) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: Cleanup of make_fit_atf.py.Christoph Muellner
This patch cleans up make_fit_atf.py in the following way: * Fix all issues reported by pylint * Move copyright notice from file-to-generate to script * Fix of-by-one bugs in loadables property * Remove commented-out (dead) code. Besides the bugfix no intended changes. Tested on RK3399-Q7 with TF-A v2.1 as BL31. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: clk: rk3399: allow requests for all UART clocksChristoph Muellner
This patch adds the rate for UART1 and UART3 the same way as already implemented for UART0 and UART2. This is required for boards, which have their console output on these UARTs. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: rk3399: Add option to print on UART3.Christoph Muellner
The RK3399 SPL does not use a pinctrl driver to setup the UART pins. Instead it works based on config macros, which set the base address of the actual UART block. Currently the RK3399 SPL support UART0 and UART2. This patch adds UART3 in the same way as UART0. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: pinctrl: rk3399: Add support for UART3.Christoph Muellner
This patch adds the missing GRF bit definitions for UART3 on the RK3399. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30rockchip: rk3399-puma: Move ENV_OFFSET to end of SPI NOR.Christoph Muellner
Puma SoMs have a 4 MB SPI NOR flash. Therefore we can move the environment to the end of the flash (4 MiB - 16 kiB) in order to not overlap with SPL. Reported-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-29Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
- Audio support
2019-05-29Merge branch '2019-05-28-master-imports'Tom Rini
- Remove various dead code from DaVinci - FAT fixes
2019-05-28Kconfig: Fix SPL_LOAD_FIT descriptionMarek Vasut
Both the SPL_LOAD_FIT and SPL_LOAD_FIT_FULL have the same description. Adjust the description to make it clear which one is which. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2019-05-28fs: fat: allocate a new cluster for root directory of fat32AKASHI Takahiro
Contrary to fat12/16, fat32 can have root directory at any location and its size can be expanded. Without this patch, root directory won't grow properly and so we will eventually fail to add files under root directory. Please note that this can happen even if you delete many files as deleted directory entries are not reclaimed but just marked as "deleted" under the current implementation. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28fs: fat: flush a directory cluster properlyAKASHI Takahiro
When a long name directory entry is created, multiple directory entries may be occupied across a directory cluster boundary. Since only one directory cluster is cached in a directory iterator, a first cluster must be written back to device before switching over a second cluster. Without this patch, some added files may be lost even if you don't see any failures on write operation. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28fs: fat: write to non-cluster-aligned root directoryAKASHI Takahiro
With the commit below, fat now correctly handles a file read under a non-cluster-aligned root directory of fat12/16. Write operation should be fixed in the same manner. Fixes: commit 9b18358dc05d ("fs: fat: fix reading non-cluster-aligned root directory") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Anssi Hannula <anssi.hannula@bitwise.fi> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-28cmd: remove unused `display` commandHeinrich Schuchardt
Compiling the display command leads to an error undefined reference to `display_set' No implementation of display_set() exists in U-Boot. Eliminate the `display` command as well as the accompanying files. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-28dm: arm: bcmstb: Enable driver model MMC supportThomas Fitzsimmons
For bcm7445 and bcm7260, this patch enables CONFIG_DM_MMC and updates the bcmstb SDHCI driver to use the new driver model. This allows removal of SDHCI configuration handling from bcmstb.c, and eliminates a board removal compile warning. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Reviewed-by: Stefan Roese <sr@denx.de>
2019-05-28mcx: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-28twister: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-05-28mt_ventoux: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-05-28cm_t3517: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-28ipam390: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-05-28eco5pk: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-28ea20: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-05-28calimain: remove boardBartosz Golaszewski
This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-28board/BuR: invalidate ${dtbaddr} before cfgscrHannes Schmelzer
The first memory location of ${dtbaddr} may be still valid after a warm restart of the machine and 'fdt addr ${dtbaddr}' doesn't recognize that the cfgscript didn't run properly and fallback mechanism with copying the internal fdt ${fdtcontroladdr} to ${dtbaddr} doesn't catch this. To get sure that we have proper failsafe behaviour we simply zero the first memory location of ${dtbaddr} for getting sure that the fdt is invalid if cfgscript didn't run. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2019-05-28fs: fat: Fix possible double free of fatbufAndrew F. Davis
fat_itr_root() allocates fatbuf so we free it on the exit path, if the function fails we should not free it, check the return value and skip freeing if the function fails. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-05-28fs: fat: correct file name normalizationHeinrich Schuchardt
File names may not contain control characters (< 0x20). Simplify the coding. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-27Prepare v2019.07-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-27Merge branch 'master' of git://git.denx.de/u-boot-marvellTom Rini
- defconfig updates to remove the DM-move build warnings for helios4 and controlcenterdc (Mario & Stefan)
2019-05-27arm: mvebu: controlcenterdc: Update configMario Six
Several drivers used by the ControlCenterDC board were converted to DM upstream. But the board had not been using these drivers yet. Update the board's config file to reflect these changes and use the DM version of these drivers. No further device tree updates are necessary, since the devices in question are already present in the device tree. This especially fixes the three compile warnings about CONFIG_DM_MMC, CONFIG_DM_USB, and CONFIG_AHCI for the ControlCenterDC board. Signed-off-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2024-12-26 19:46:32 +0000