summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-22test/py: efi_secboot: remove unused functionAKASHI Takahiro
'tool_is_in_path' function is no longer used anywhere after Heinrich has removed 'sudo' version of fixture setup. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22efi_loader: use logging for block device messagesHeinrich Schuchardt
Use logging instead of printf() for messages occurring when scanning block devices during the initialization of the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22efi_loader: use logging for bootefi commandHeinrich Schuchardt
Log messages of the bootefi command instead of simply printing them to the console. Do not show "## Application terminated" message when the UEFI binary completed successfully. Adjust the python tests testing for '## Application terminated'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22efi_loader: returning from UEFI FIT imagesHeinrich Schuchardt
Do not reset the board when returning from an UEFI FIT image. For failed UEFI binary we already print the return status in efi_run_image. Remove duplicate output. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22efi_loader: document efi_save_gd(), efi_restore_gd()Heinrich Schuchardt
Provide function descriptions for efi_save_gd() and efi_restore_gd(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22efi_loader: loosen buffer parameter check in efi_file_readStefan Sørensen
When reading a directory, EFI_BUFFER_TOO_SMALL should be returned when the supplied buffer is too small, so a use-case is to call efi_file_read with *buffer_size=0 and buffer=NULL to obtain the needed size before doing the actual read. So move the buffer!=NULL check to after the buffer size has been checked. This fix allows the Redhat shim fallback to run and e.g. Fedora 32 now boots out of the box. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22efi_loader: Check for the native OP-TEE result on mm_communicate callsIlias Apalodimas
Currently we only check for the return value of tee_invoke_func(). Although OP-TEE and StMM will correctly set param[1].u.value.a and we'll eventually return an error, the correct thing to do is check for the OP_TEE return code as well. So let's check for that and move tee_shm_free() and tee_close_session() before exiting with an error to make sure we always clear the registered memory. Fixes: f042e47e8fb43 ("efi_loader: Implement EFI variable handling via OP-TEE") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Use EFI_DEVICE_ERROR for TEE communication problems. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22efi_loader: Rename and correct values for ARM_SMC_MM_*Ilias Apalodimas
Instead of adding the definition for the specific MM SVC used in StandAloneMM we added the one used in the standard SMC calls. So change the value from -4 to -5 to match the correct one defined in EDK2 and rename them to avoid future confusion Fixes 23a397d2e2fb: ("efi_loader: Add headers for EDK2 StandAloneMM communication") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22efi_loader: don't use memmove() in efi_var_mem_del()Heinrich Schuchardt
efi_var_mem_del() is in __efi_runtime because it would be needed for a runtime implementation of SetVariable(). memmove() is not in __efi_runtime. So we should not use it in efi_var_mem_del(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22efi_loader: efi_current_var after SetVirtualAddressMapHeinrich Schuchardt
Variable efi_current_var is a pointer to a physical memory address that becomes invalid after SetVirtualAddressMap(). Instead of converting it via ConvertPointer() simply set it to NULL. Fixes: b02a707152dc ("efi_loader: enable UEFI variables at runtime") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-21Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- add new series Micron SPI NAND devices (Shivamurthy)
2020-07-20mtd: spinand: micron: Add new Micron SPI NAND devices with multiple diesShivamurthy Shastri
Add device table for new Micron SPI NAND devices, which have multiple dies. Also, enable support to select the dies. Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-20mtd: spinand: micron: Add M70A series Micron SPI NAND devicesShivamurthy Shastri
Add device table for M70A series Micron SPI NAND devices. Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-20mtd: spinand: micron: identify SPI NAND device with Continuous Read modeShivamurthy Shastri
Add SPINAND_HAS_CR_FEAT_BIT flag to identify the SPI NAND device with the Continuous Read mode. Some of the Micron SPI NAND devices have the "Continuous Read" feature enabled by default, which does not fit the subsystem needs. In this mode, the READ CACHE command doesn't require the starting column address. The device always output the data starting from the first column of the cache register, and once the end of the cache register reached, the data output continues through the next page. With the continuous read mode, it is possible to read out the entire block using a single READ command, and once the end of the block reached, the output pins become High-Z state. However, during this mode the read command doesn't output the OOB area. Hence, we disable the feature at probe time. Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-20mtd: spinand: micron: Add new Micron SPI NAND devicesShivamurthy Shastri
Add device table for M79A and M78A series Micron SPI NAND devices. Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-20mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGDShivamurthy Shastri
Add the SPI NAND device MT29F2G01ABAGD series number, size and voltage details as a comment. Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-20mtd: spinand: micron: Generalize the OOB layout structure and function namesShivamurthy Shastri
In order to add new Micron SPI NAND devices, we generalized the OOB layout structure and function names. Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- dm: core: Don't show an ACPI warning if there is no ordering - x86: Enhance MTRR functionality to support multiple CPUs
2020-07-20x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPUSimon Glass
Update this command so it can list the MTRRs on a selected CPU. If '-c all' is used, then all CPUs are listed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mp: Add more comments to the moduleSimon Glass
Add a description of how this module works and also some missing function comments. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPUSimon Glass
Add a -c option to mtrr to allow any CPU to be updated with this command. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mtrr: Restructure so command execution is in one placeSimon Glass
At present do_mtrr() does the 'list' subcommand at the top and the rest below. Update it to do them all in the same place so we can (in a later patch) add parsing of the CPU number for all subcommands. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mtrr: Update the command to use the new mtrr callsSimon Glass
Use the multi-CPU calls to set the MTRR values. This still supports only the boot CPU for now. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mtrr: Add support for writing to MTRRs on any CPUSimon Glass
To enable support for the 'mtrr' command, add a way to perform MTRR operations on selected CPUs. This works by setting up a little 'operation' structure and sending it around the CPUs for action. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-20x86: mtrr: Update MTRRs on all CPUsSimon Glass
When the boot CPU MTRRs are updated, perform the same update on all other CPUs so they are kept in sync. This avoids kernel warnings about mismatched MTRRs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: coral: Update the memory mapSimon Glass
This currently excludes the temporary memory used to start up the APs. Add it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-20x86: Don't enable SMP in SPLSimon Glass
SMP should be set up in U-Boot where possible, not SPL. Disable it in SPL. For 64-bit U-Boot we should find a way to allow SMP operations in U-Boot, but this is somewhat more complicated. For now that is disabled too. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-20x86: mtrr: Use MP calls to list the MTRRsSimon Glass
Update the mtrr command to use mp_run_on_cpus() to obtain its information. Since the selected CPU is the boot CPU this does not change the result, but it sets the stage for supporting other CPUs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mp: Add iterators for CPUsSimon Glass
It is convenient to iterate through the CPUs performing work on each one and processing the result. Add a few iterator functions which handle this. These can be used by any client code. It can call mp_run_on_cpus() on each CPU that is returned, handling them one at a time. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mp: Park CPUs before running the OSSimon Glass
With the new MP features the CPUs are no-longer parked when the OS is run. Fix this by calling a special function to park them, just before the OS is started. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mp: Allow running functions on multiple CPUsSimon Glass
Add a way to run a function on a selection of CPUs. This supports either a single CPU, all CPUs, just the main CPU or just the 'APs', in Intel terminology. It works by writing into a mailbox and then waiting for the CPUs to notice it, take action and indicate they are done. When SMP is not yet enabled, this just calls the function on the main CPU. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: Set the SMP flag when MP init is completeSimon Glass
Set this flag so we can track when it is safe to use CPUs other than the main one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20global_data: Add a generic global_data flag for SMP stateSimon Glass
Allow keeping track of whether all CPUs have been enabled yet. This allows us to know whether other CPUs need to be considered when updating CPU-specific settings such as MTRRs on x86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mp: Support APs waiting for instructionsSimon Glass
At present the APs (non-boot CPUs) are inited once and then parked ready for the OS to use them. However in some cases we want to send new requests through, such as to change MTRRs and keep them consistent across CPUs. Change the last state of the flight plan to go into a wait loop, accepting instructions from the main CPU. Drop cpu_map since it is not used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: cpu: Remove unnecessary #ifdefsSimon Glass
Drop some #ifdefs that are not needed or can be converted to compile-time checks. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mp_init: Adjust bsp_init() to return more informationSimon Glass
This function is misnamed since it does not actually init the BSP. Also it is convenient to adjust it to return a little more information. Rename and update the function, to allow it to return the BSP CPU device and number, as well as the total number of CPUs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mp_init: Set up the CPU numbers at the startSimon Glass
At present each CPU is given a number when it starts itself up. While this saves a tiny amount of time by doing the device-tree read in parallel, it is confusing that the numbering happens on the fly. Move this code into mp_init() and do it at the start. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mtrr: Fix 'ensable' typoSimon Glass
Fix a typo in the command help. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mp_init: Drop the num_cpus static variableSimon Glass
This does not need to be global across all functions in this file. Pass a parameter instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mp_init: Switch parameter names in start_aps()Simon Glass
These parameters are named differently from elsewhere in this file. Switch them to avoid confusion. Also add comments to this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-20x86: mp_init: Avoid declarations in header filesSimon Glass
The functions used by the flight plan are declared in the header file but are not used in any other file. Move the flight plan steps down to just above where it is used so that we can make these function static. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: Move MP code into mp_initSimon Glass
At present the 'flight plan' for CPUs is passed into mp_init. But it is always the same. Move it into the mp_init file so everything is in one place. Also drop the SMI function since it does nothing. If we implement SMIs, more refactoring will be needed anyway. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: mp_init: Switch to livetreeSimon Glass
Update this code to use livetree calls instead of flat-tree. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20dm: core: Don't show an ACPI warning if there is no orderingSimon Glass
Some boards don't care about the ordering of ACPI code fragments. Change the warning to a debug message. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-18Merge tag 'mips-pull-2020-07-18' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - MIPS: refactor cache init and setup in start.S - MIPS: sync asm header files with Linux 5.7 - MIPS: add initial support for Marvell Octeon MIPS64
2020-07-18mips: octeon: Add minimal Octeon 3 EBB7304 EVK supportStefan Roese
This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18mips: octeon: use mips_mach_early_init() to copy to L2 cacheStefan Roese
This patch adds the code to copy itself from bootrom location to a different location (TEXT_BASE) to the Octeon platform. Its used in this case to copy the complete U-Boot image into L2 cache, which greatly improves the bootup time - especially in regard to the very long and complex DDR4 init code. The Kconfig symbol CONFIG_MIPS_MACH_EARLY_INIT is enabled with this patch for Octeon. Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18mips: octeon: dts: Add Octeon 3 cn73xx base dtsi fileStefan Roese
This patch adds the base dtsi file for the Octeon 3 cn73xx SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18mips: octeon: Initial minimal support for the Marvell Octeon SoCAaron Williams
This patch adds very basic support for the Octeon III SoCs. Only CFI parallel NOR flash and UART is supported for now. Please note that the basic Octeon port does not include the DDR3/4 initialization yet. This will be added in some follow-up patches later. To still use U-Boot on with this port, the L2 cache (4MiB on Octeon III CN73xx) is used as RAM. This way, U-Boot can boot to the prompt on such boards. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18sysreset: Add Octeon sysreset driverStefan Roese
This patch adds a UCLASS_SYSRESET sysreset driver for the Octeon SoC family. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-23 15:13:01 +0000