summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-06-21cpuat91: fix board supportEric Benard
Signed-off-by: Eric Bénard <eric@eukrea.com>
2011-06-21cpu9260/9G20: fix board supportEric Benard
Signed-off-by: Eric Bénard <eric@eukrea.com>
2011-06-21arm926ejs/at91/lowlevel_init.S: fix definesEric Benard
atmel rework changed define names which broke this file Signed-off-by: Eric Bénard <eric@eukrea.com>
2011-06-21ATMEL spi_dataflash driver - fix to build againReinhard Meyer
The rework effort for ATMEL (AT91/AVR32) accidentially broke build of this driver. Fix this to make it build again. However this driver should be reworked as soon as possible! Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-06-21AT91 rework: fix TOP9000 files to build againReinhard Meyer
Fix EMK TOP9000 board to build again: - changes required due to ATMEL rework Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-06-21AT91 rework: fix at91sam(9260/9g20/9xe)ek board port to build again:Reinhard Meyer
Make ATMEL's at91sam9260/9g20/9xe-ek boards build again Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-06-21Add support for Bluewater Systems Snapper 9260/9G20 modulesRyan Mallon
Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20 single board computer modules. Includes NAND flash and Ethernet support. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
2011-06-21update arm/at91rm9200 work with rework rework110202Jens Scharsig
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme * Fix: timer.c compile error io.h not found with arm/at91rm9200 * update arm920t/at91 to ATMEL_xxx name scheme * update arm920t/at91 soc lib * update at91_emac driver Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> Tested-by: Andreas Bießmann <andreas.devel@gmail.com>
2011-06-21mx31pdk: Add DHCP commandFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-06-21mxc_spi.c: typo fixedHelmut Raiger
Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
2011-06-21imx31_phycore: Fix build by using new relocation schemeFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-06-21mx1ads: Fix build by using new relocation schemeFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-06-21MX31: QONG: drop config.mkStefano Babic
Remove obsolete config.mk from QONG board. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-06-21omap730p2: fix build breaksAneesh V
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-06-21omap2420h4: fix build breaksAneesh V
DRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-06-21omap1610inn: fix build breaksAneesh V
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-06-21omap1510inn: fix build breaksAneesh V
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-06-21omap5912osk: fix build breaksAneesh V
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-06-21omap1610h2: fix build breaksAneesh V
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-06-09powerpc/p1022ds: set the clock-frequency prop only if the clock is enabledTimur Tabi
The clock-frequency property in an audio codec's device tree node is set to the input clock frequency for that codec. On the Freescale P1022DS board, the input clock is enabled only if the hwconfig 'audclk' option is set. Therefore, the property should only be set in the device tree if the clock is actually enabled. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-08Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: SMDK6400: fix the compiler error imx27lite: Remove local config.mk mx31ads: Fix environment location on flash imx31_litekit: Remove local config.mk mx31litekit: Fix boot with the new relocation scheme. mx31ads: Use the new relocation scheme
2011-06-08SMDK6400: fix the compiler errorMinkyu Kang
This patch adds _end for fix following compiler error arch/arm/cpu/arm1176/start.o: In function `_end_ofs': arch/arm/cpu/arm1176/start.S:61: undefined reference to `_end' Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-06-07imx27lite: Remove local config.mkFabio Estevam
Local board config.mk should be avoided. Place CONFIG_SYS_TEXT_BASE definition into the board config file instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-06-07mx31ads: Fix environment location on flashFelix Radensky
At the moment u-boot and u-boot environment on flash have overlapping addresses, so each u-boot update erases the environment. Fix this by placing evironment right after u-boot. Also, remove confusing comment about environment location. Signed-off-by: Felix Radensky <felix@embedded-sol.com>
2011-06-07imx31_litekit: Remove local config.mkFabio Estevam
Local board config.mk should be avoided. Place CONFIG_SYS_TEXT_BASE definition into the board config file instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2011-06-06mx31litekit: Fix boot with the new relocation scheme.Fabio Estevam
imx31_litekit has been converted to the new relocation scheme, but it does not boot. Make the boot functional by using board_early_init_f . Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
2011-06-06mx31ads: Use the new relocation schemeFabio Estevam
This fixes the MX31ADS build by using the new relocation scheme. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Felix Radensky <felix@embedded-sol.com>
2011-06-03Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update embedded env settingsHarald Krapfenbauer
The recent commit ea882baf9c1 broke embedding environments in the middle of a sector, so relocate it to the start of the 2nd sector. Signed-off-by: Harald Krapfenbauer <harald.krapfenbauer@bluetechnix.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-03Blackfin: boards: build zlib dir with -O2Mike Frysinger
Now that the zlib code has been relocated to a dedicated subdir, make sure we still build it with -O2 for boards that want speed over size. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-03Blackfin: bf548-ezkit/bf561-ezkit: update env locationMike Frysinger
Relocate the env to one of the small end sectors to avoid issues with embedding it, such as support being broken (by recent commit ea882baf9c1), and for taking a while to save updates. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-03Blackfin: use on-chip reset func with newer partsMike Frysinger
Turns out the documentation is wrong and doing "RAISE 1" does not result in a software reset, only a core reset. So when the on-chip rom has a functioning reset helper, use it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-03Blackfin: use common LDSCRIPT logicMike Frysinger
Now that common code is a bit smarter when it comes to default LDSCRIPT values, rename the default Blackfin file and drop the Blackfin-specific config.mk logic. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-02Prepare v2011.06-rc2Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-06-02Minor coding style cleanupWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-06-01common/cmd_fdt.c: fix wrong data displayed in fdt printHaojian Zhuang
All data in dtb is big endian. Some ARM devices are little-endian. In print_data(), it displays data with big-endian format. For ARM device, data should be converted to little-endian first. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Gerald Van Baren <vanbaren@cideas.com>
2011-06-01sntp: avoid use of uninitialized variableLuuk Paulussen
When we use the ntpserverip environment variable argv[1] may not be set. Printing the error message using the NetNtpServerIP variable ensures the correct output in both cases. Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Ben Warren <biggerbadderben@gmail.com> Acked-by: Detlev Zundel <dzu@denx.de>
2011-06-01sf: kick watchdog when pollingPatrick Sestier
The status polling can take a while, so make sure we kick the watchdog after each successful poll. Signed-off-by: Patrick Sestier <psestier@mircom.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-01net/net.c: Update ipaddr if the environment has changedEnric Balletbo i Serra
At least on ARM the ipaddr is only set in board_init_r function. The problem is if ipaddr is not defined in environment importing another environment defined don't update the ipaddr value. For example, suppose we've a default environment without net variables defined and we want to import an uEnv.txt environment from SD-card like this: ipaddr=192.168.2.240 netmask=255.255.255.0 gatewayip=192.168.2.1 serverip=192.168.2.114 Then if you try boot from NFS results in: Importing environment from mmc ... Running uenvcmd ... smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC ac:de:48:00:00:00 *** ERROR: `ipaddr' not set The ipaddr at this point is NULL beacause is only set at board_init_r function. This patch updates the ipaddr value if the environment has changed. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-06-01Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
* 'master' of /home/wd/git/u-boot/custodians: sh: sh7785lcr: Update BSC of USB area
2011-06-01Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk
* 'master' of git://git.denx.de/u-boot-sh: sh: sh7785lcr: Update BSC of USB area
2011-06-01Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
* 'master' of /home/wd/git/u-boot/custodians: SMDKV310: Fix incorrect conditional compilation for MIU linear mapping SMDKV310: CPU fequency and mmc_pre_ratio modified armv7: Add support for ST-Ericsson U8500 href platform I2C: Add driver for ST-Ericsson U8500 i2c armv7: Add ST-Ericsson u8500 arch Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT ARMV7: Vexpress: Add missing MMC header arm/km: update mgcoge3un board support mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE arm/km: rename mgcoge2un to mgcoge3un arm/km: add second serial interface for kirkwood arm/km: disable ls (through jffs2 support) arm/km: introduce bootcount env variable and clean km_arm arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h ARMV7: MMC SPL Boot support for SMDKV310 board ARMV7: Add support for Samsung SMDKV310 Board S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1) S5P: add set_mmc_clk for external clock control S5PC2XX: Support the cpu revision S5P:SROM config code moved to s5p-common directory Add _end for the end of u-boot image for SMDK6400 MMC S5P: Fix typo S5P: GPIO Macro Values Corrected. SMDK2410: various cleanup/code style fixes SMDK2410: use the CFI driver (and remove the old one) SMDK2410: remove unneeded config.mk SMDK2410: activate ARM relocation feature BeagleBoard: fixed typo in typecast mvsata: issue hard reset on initialization VCMA9: use ARM relocation feature to fix build error MX31: drop warnings due to missing prototype for mxc_watchdog_reset() MX5: drop config.mk from efikamx board MX31: Make get_reset_cause() static and drop unreachable code MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files. MX53: Handle silicon revision 2.1 case mx5: board: code clean up for checkboard code MX51: vision2: Fix build for vision2 board. MX51: vision: Let video mode struct be independant of watchdog. MX53: Add initial support for MX53SMD board. MX53: support for freescale MX53LOCO board mx5: Fix CONFIG_OF_LIBFDT redefined warning mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition mx31pdk: Clean up mx31pdk.h file
2011-06-01Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: SMDKV310: Fix incorrect conditional compilation for MIU linear mapping SMDKV310: CPU fequency and mmc_pre_ratio modified armv7: Add support for ST-Ericsson U8500 href platform I2C: Add driver for ST-Ericsson U8500 i2c armv7: Add ST-Ericsson u8500 arch Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT ARMV7: Vexpress: Add missing MMC header arm/km: update mgcoge3un board support mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE arm/km: rename mgcoge2un to mgcoge3un arm/km: add second serial interface for kirkwood arm/km: disable ls (through jffs2 support) arm/km: introduce bootcount env variable and clean km_arm arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h ARMV7: MMC SPL Boot support for SMDKV310 board ARMV7: Add support for Samsung SMDKV310 Board S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1) S5P: add set_mmc_clk for external clock control S5PC2XX: Support the cpu revision S5P:SROM config code moved to s5p-common directory Add _end for the end of u-boot image for SMDK6400 MMC S5P: Fix typo S5P: GPIO Macro Values Corrected. SMDK2410: various cleanup/code style fixes SMDK2410: use the CFI driver (and remove the old one) SMDK2410: remove unneeded config.mk SMDK2410: activate ARM relocation feature BeagleBoard: fixed typo in typecast mvsata: issue hard reset on initialization VCMA9: use ARM relocation feature to fix build error MX31: drop warnings due to missing prototype for mxc_watchdog_reset() MX5: drop config.mk from efikamx board MX31: Make get_reset_cause() static and drop unreachable code MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files. MX53: Handle silicon revision 2.1 case mx5: board: code clean up for checkboard code MX51: vision2: Fix build for vision2 board. MX51: vision: Let video mode struct be independant of watchdog. MX53: Add initial support for MX53SMD board. MX53: support for freescale MX53LOCO board mx5: Fix CONFIG_OF_LIBFDT redefined warning mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition mx31pdk: Clean up mx31pdk.h file
2011-06-01Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
* 'master' of /home/wd/git/u-boot/custodians: powerpc/fsl_pci: Fix device tree fixups for newer platforms
2011-06-01Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
* 'master' of git://git.denx.de/u-boot-mpc85xx: powerpc/fsl_pci: Fix device tree fixups for newer platforms
2011-06-01Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
* 'master' of /home/wd/git/u-boot/custodians: cmd_nand: fix help of nand erase subcommand env_nand: zero-initialize variable nand_erase_options
2011-06-01Move wepep250,delta,xsengine to scrapyardMarek Vasut
Drop wepep250 board from MAINTAINERS and add all these three boards to doc/README.scrapyard Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-06-01SMDKV310: Fix incorrect conditional compilation for MIU linear mappingThomas Abraham
Fix the incorrect macro check for MIU linear mapping conditional compilation. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2011-06-01SMDKV310: CPU fequency and mmc_pre_ratio modifiedChander Kashyap
Modifies CPU Frequency to 1GHz and removes hard coding of mmc_pre_ratio for MMC Channel2 in FSYS2 register. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2011-06-01armv7: Add support for ST-Ericsson U8500 href platformJohn Rigby
Minimal platform support to boot linux from SD. Supported devices/hw limited to external MMC/SD slot, GPIO, I2C and minimal PRCMU. Signed-off-by: John Rigby <john.rigby@linaro.org> CC: Albert Aribaud <albert.aribaud@free.fr>
2011-06-01I2C: Add driver for ST-Ericsson U8500 i2cMichael Brandt
Signed-off-by: John Rigby <john.rigby@linaro.org> CC: Heiko Schocher <hs@denx.de>
generated by cgit (git 2.34.1) at 2024-12-29 07:08:05 +0000