summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-20dma: ti: k3-udma: Switch to exposed ring modeVignesh Raghavendra
Exposed ring mode works well with 32 bit and 64 bit cores without need for Proxies for 32 bit cores. Therefore switch to exposed ring mode. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20dma: ti: k3-udma: Fix debug prints during enabling MEM_TO_DEV transfersVignesh Raghavendra
Fix up the debug prints that were dumping state of TCHAN RT registers to use tchan for MEM_TO_DEV transfers. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20dma: ti: k3-udma: Remove coherency check for cache opsVignesh Raghavendra
Remove redundant coherency checks before calling cache ops in UDMA driver. This is now handled in arch specific cache operation implementation based on Kconfig option Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20soc: ti: k3-navss-ringacc: Get SYSFW reference from DT phandleVignesh Raghavendra
Instead of looking getting reference to SYSFW device using name which is not guaranteed to be constant, use phandle supplied in the DT node to get reference to SYSFW Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20soc: ti: k3-navss-ringacc: Flush/invalidate caches on ring push/popVignesh Raghavendra
Flush caches when pushing an element to ring and invalidate caches when popping an element from ring in Exposed Ring mode. Otherwise DMA transfers don't work properly in R5 SPL (with caches enabled) where the core is not in coherency domain. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20dma: ti: k3-udma: Query DMA channels allocated from Resource ManagerVignesh Raghavendra
On K3 SoCs, DMA channels are shared across multiple entities, therefore U-Boot DMA driver needs to query resource range from centralised resource management controller i.e SystemFirmware and use DMA channels allocated for A72 host. Add support for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20lib: Import few bitmap functions from LinuxVignesh Raghavendra
Import few basic bitmap functions (bitmap_{weight,fill,set,clear,or}()) and their dependencies from Linux. These are required for upcoming DMA resource allocation support for TI's K3 SoCs. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: am43xx: remove net platform codeGrygorii Strashko
The TI AM43xx platform has DM_ETH and OF_CONTROL enabled, so remove networking platform code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: dra7-evm: remove net platform codeGrygorii Strashko
The DRA7 has DM_ETH and OF_CONTROL enabled, so remove networking platform code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20ARM: dts: da850-lcdk: Update DTS files for SPL device tree supportAdam Ford
Currently, the da850-lcdk uses SPL_OF_PLATDATA and manually loads the necessary source code instead of using the auto-generated, because the drivers don't properly autogenerate the code. This patch simply enables the various device tree options to mimic the da850-evm which doesn't need or use OF_PLATDATA for device tree support. It does not disable OF_PLATDATA. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20thermal: ti-bandgap: Fix adc value datatypeFaiz Abbas
The CORE_TEMP_SENSOR_MPU register gives a raw adc value which needs to be indexed into a lookup table to get the actual temperature. Fix the naming and datatype of the adc value variable. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm_a72_defconfig: Enable USB related configsVignesh Raghavendra
Enable USB host and device related configs. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: dts: k3-j721e: Add DT nodes for USBVignesh Raghavendra
J721e has two instances of Cadence USB3 controller. Add DT nodes for the same. USB0 is configured to device mode and USB1 is configured to host mode. For now only high speed mode is supported. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20environment: ti: Add DFU environment variables k3_dfu.hVignesh Raghavendra
Setup env variables for updating firmwares on eMMC/OSPI/MMC via DFU Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-17common: Update comment to show progressSimon Glass
This file doesn't include any declarations anymore but it does include other headers. Update the header comment to mention this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Collect all the header files togetherSimon Glass
There are many header files included here. Put them all together since the blank lines are not useful. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move and rename CONFIG_SYS_SUPPORT_64BIT_DATASimon Glass
This is not really a CONFIG since it is not intended to be set by boards. Move it into the compiler header with other similar defines, and rename it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move ROUND() into kernel.hSimon Glass
Move this macro in with all the other rounding macros. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move check_member() to kernel.hSimon Glass
The kernel.h file has a number of useful macros including a few related to structures. Move check_member() there too. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17common: Move testdram() into init.hSimon Glass
This function is called during init so move it to the init header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move RAM-sizing functions to init.hSimon Glass
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Rename and move source()Simon Glass
This function has a very generic name which does not adequately describe its purpose. Rename it and move it to image.h, since it relates to reading a script from an image. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move the image globals into image.hSimon Glass
These three globals relate to image handling. Move them to the image header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17image: Rename load_addr, save_addr, save_sizeSimon Glass
These global variables are quite short and generic. In fact the same name is more often used locally for struct members and function arguments. Add a image_ prefix to make them easier to distinguish. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move reset_cpu() to the CPU headerSimon Glass
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move reset_misc() function to arch headerSimon Glass
This function is only used on ARM devices. Move it out of the common file and to a arch-specific header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move get_tbclk() to time.hSimon Glass
This function related to timer and most of the timer functions are in time.h, so move this function there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move clock functions into a new fileSimon Glass
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move upmconfig() to ppc.hSimon Glass
This file is only used by PowerPC so move it to an arch-specific header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move ll_boot_init() to init.hSimon Glass
This is an init-related function so belongs in that file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: arm: Move s_init() to an ARM-specific headerSimon Glass
This function is only used on ARM devices so does not belong in the global common header file. Move it to an ARM header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move device-tree setup functions to fdt_support.hSimon Glass
These functions relate to setting up the device tree for booting the OS. The fdt_support.h header file supports similar functions, so move these there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move type declarations to linux/types.hSimon Glass
This file already has lots of type declarations so it seems better to put all of them there. Move them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Drop the symbol_lookup() declarationSimon Glass
This function is not called anywhere so we can drop the declaration. If it is needed one day, it should be added in its own header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Drop CONFIG_HAS_POSTSimon Glass
This only exists to control whether the post/ directory is build. It is just as easy to check this in the Makefile. Remove CONFIG_HAS_POST and use an ifdef in the Makefile instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Drop CONFIG_POST_STD/ALT_LISTSimon Glass
These CONFIG options are not used anymore. CONFIG_POST_ALT_LIST just causes CONFIG_POST_STD_LIST to be set and it causes tests.c to be compiled. So just make compiling tests.c unconditional. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move CONFIG_SYS_DEF_EEPROM_ADDR out of common.hSimon Glass
This define seems better suited to the eeprom header file, particularly as it is only used in the eeprom.c file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move reset_phy() to net.hSimon Glass
This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Drop floppy disk supportSimon Glass
This seems pretty old now. It has not been converted to driver model and is not used by any boards. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move jumptable_init() out of common.hSimon Glass
This function is defined in exports.c so move it to its header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-17common: Move relocate_code() to init.hSimon Glass
This is an init function so move it out of the common header. Avoid using the typedef so that we don't have to include the global_data header file. Also tidy up the function style in comments while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move functions for loading from fat/ext2 to fs.hSimon Glass
These are filesystem functions and belong in the filesystem header file. Move them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move do_tftpb() to net.hSimon Glass
This function belongs in the network header file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move embedded fdt location to fdtdec.hSimon Glass
These declarations are only used in fdtdec.c so move them to its header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Drop checkflash() and checkdram()Simon Glass
These functions are not used in U-Boot. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move flash_perror() to flash.hSimon Glass
This function belongs more in flash.h than common.h so move it. Also remove the space before the bracket in some calls. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move main_loop() to init.hSimon Glass
Move this function out of common.h and into a better place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-17common: Drop mdm_init()Simon Glass
This is not used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-17Merge branch '2020-01-17-improve-aes-support'Tom Rini
- Add support and tests for AES192 and AES256