summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-31configs: am335x_boneblack_vboot_defconfig: Add DM for SPI and Flash devicesSuniel Mahesh
This patch adds SPI and SPI_FLASH DM support for verified boot on TI AM335 chipsets. The following compile warning is removed: ===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH. Please update the board to use CONFIG_SPI_FLASH before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Built and tested on AM335x device (BeagleboneBlack). Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-07-31configs: am335x_boneblack_vboot_defconfig: Fix regression by enabling BLK ↵Suniel Mahesh
and DM support, disable in SPL This patch adds BLK and DM support for verified boot on TI AM335x chipsets. The following compile warnings are removed: ===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== BLK and DM_MMC are enabled by default in SPL as well, which is making the build to break with an overflow(spl image doesn't fit into SRAM because of size constraints). LD spl/drivers/built-in.o LD spl/u-boot-spl arm-linux-ld.bfd: u-boot-spl section .u_boot_list will not fit in region .sram arm-linux-ld.bfd: region .sram overflowed by 116 bytes make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 For the above reason BLK and DM_MMC is disabled in SPL. Built and tested on AM335x device (BeagleboneBlack). Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-07-31configs: j721e_evm_a72: Disable K3_SYSTEM_CONTROLLERSuman Anna
The K3 System Controller driver is used for loading and starting the System Firmware, and is used only on R5 SPL. It need not be enabled and built for the A72 U-Boot and SPL, so disable it from the j721e_evm_a72 defconfig. While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A72 SPL. Signed-off-by: Suman Anna <s-anna@ti.com>
2019-07-31configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLERSuman Anna
The K3 System Controller driver is used for loading and starting the System Firmware, and is used only on R5 SPL. It need not be enabled and built for the A53 U-Boot and SPL, so disable it from both the GP and HS AM65x A53 defconfigs. While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A53 SPL. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-31arm: dts: k3-am654-base-board: Fix cpsw_nuss power-domains propertySuman Anna
The commit 355be915ed08 ("arm: dts: k3-am654: Update power-domains property for each node") has updated the power-domain cells value and updated power-domains property in various existing dts nodes but missed updating the cpsw_nuss node. This results in the following build warning, fix this. arch/arm/dts/k3-am654-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/cpsw_nuss@046000000:power-domains: property size (8) too small for cell size 2 arch/arm/dts/k3-am654-r5-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/cpsw_nuss@046000000:power-domains: property size (8) too small for cell size 2 Fixes: 355be915ed08 ("arm: dts: k3-am654: Update power-domains property for each node") Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-31ARM: da850-evm: Replace CMD_SF with CMD_MTDAdam Ford
This patch enables MTD and CMD_MTD and it works with SPI NOR, so the older CMD_SF can be removed. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-31ARM: da850evm: Split MTDPARTS into SPL and u-bootAdam Ford
The MTDPARTS currently lists just u-boot.ais as 512k in size. This works when loading the ais file via serial port, but if one wanted to update just the u-boot portion, it's not really possible. This patch splits the MTDPARTS into a 32k SPL partiion and a 480k u-boot partition which allows u-boot.img to be burned to the u-boot partition. The remaining partitions are left with the same sizes and offsets to not break backwards compatibility. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-31configs: am57xx_evm_defconfig: Enable 'dtimg' commandSam Protsenko
We are going to implement DTBO partition for BeagleBoard X15 further. To support this, 'dtimg' command must be enabled. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-31configs: am57xx_evm_defconfig: Enable 'bcb' commandSam Protsenko
It is essential to have an access to BCB area of 'misc' partition on Android devices [1]. For BeagleBoard X15 the 'bcb' command will be further used for reboot reason implementation and booting to recovery. It can be also used for debugging reasons, like checking RescueParty messages in BCB area. [1] doc/android/bcb.txt Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-31omap: Correct the fastboot product varSam Protsenko
"fastboot flashall" expects "fastboot getvar product" value to be one of values provided in android-info.txt file (in AOSP), from "require board=" list. Before this patch, "am57xx" is returned for all AM57xx based boards, as it's set in $board env var from SYS_BOARD in board/ti/am57xx/Kconfig file, which is used for default implementation of "fastboot getvar product". In order to fix that inconsistency, let's do next: 1. In U-Boot: override fastboot.product, reusing the value from $board_name 2. In AOSP: provide values for all AM57xx boards we can use to device/ti/beagle_x15/board-info.txt file This way requirements check in "fastboot flashall" will work as expected, verifying that user tries to flash images to the board which those images were built for. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Andrew F. Davis <afd@ti.com>
2019-07-31env: ti: boot: Handle reboot reason from BCBSam Protsenko
In case of Android boot, reboot reason can be written into BCB (usually it's an area in 'misc' partition). U-Boot then can obtain that reboot reason from BCB and handle it accordingly to achieve correct Android boot flow, like it was suggested in [1]: - if it's empty: perform normal Android boot from eMMC - if it contains "bootonce-bootloader": get into fastboot mode - if it contains "boot-recovery": perform recovery boot The latter is not implemented yet, as it depends on some features that are not implemented on TI platforms yet (in AOSP and in U-Boot). [1] https://marc.info/?l=u-boot&m=152508418909737&w=2 Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-31Merge tag 'mmc-7-31' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
A new mmc/sd block test case Bug fixes for sdhci and mv_sdhci
2019-07-31clk: meson: remove duplicate logicHeinrich Schuchardt
First thing we check in meson_clk_set_rate_by_id() is current_rate == rate. There is not need to check it again. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-31board: amlogic: add support for Odroid-N2Neil Armstrong
ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd with the following specifications: - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC - 4GB DDR4 SDRAM - Gigabit Ethernet - HDMI 2.1 4K/60Hz display - 40-pin GPIO header - 4 x USB 3.0 Host, 1 x USB OTG - eMMC, microSD - Infrared receiver The board directory is W400, the name of the Amlogic Reference Design of Amlogic G12B with Gigabit boards, which will be used for similar boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31ARM: meson-g12a: Handle 4GiB DRAM sizeNeil Armstrong
When configured with 4GiB DRAM size, only 3.8GiB is available, the I/O beeing mapped in the last 256MiB of the first 4GiB physical memory/ First fixup the mm_region to handle the first 3.8GiB as memory and the last 256MiB as I/O. Then limit the real memory reported by the firmware to the available physical space, 3.8GiB aligned with the mm_region memory zone size. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31ARM: dts: add support for Odroid-N2Neil Armstrong
Import HardKernel Odroid-N2 DT from Linux 5.3-rc1, commit 5f9e832c1370 ("Linus 5.3-rc1") based on an Amlogic G12B S922X SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1Neil Armstrong
Sync the Amlogic Meson G12A DT and Bindings file with the Linux 5.3-rc1 from the commit 5f9e832c1370 ("Linus 5.3-rc1"). Also remove the meson-g12a-u-boot.dtsi and meson-g12a-u200-u-boot.dtsi, now conflicting with the main DT content. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31mmc: relocate code commentBaruch Siach
The comment about init op being NULL used to be next to the NULL check code. Commit 8ca51e51c182 ("dm: mmc: Add a way to use driver model for MMC operations") separated the comment from the code. Put them back together. Fixes: 8ca51e51c182 ("dm: mmc: Add a way to use driver model for MMC operations") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-31mmc: mtk-sd: add WATCHDOG_RESET() to prevent watchdog timeoutWeijie Gao
When reading large data in once (reading 512MiB is tested on MT7623), a watchdog timeout is triggered due to watchdog not being fed. This patch adds WATCHDOG_RESET() to msdc_start_data() so the watchdog will be fed every 1024 blocks are read/written. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-31mmc: sdhci: fix chip detect gpio property nameBaruch Siach
The standard property name for chip-detect gpio is "cd-gpios". All in-tree DT files use only this name. Fixes: 451931ea700 ("mmc: sdhci: Read cd-gpio from devicetree") Cc: T Karthik Reddy <t.karthik.reddy@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-31mmc: mv_sdhci: fix uninitialized pointer deref on probeBaruch Siach
Since commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Move the mmc field initialization before sdhci_setup_cfg() call to avoid crash on mmc pointer dereference. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-07-31test/py: add MMC/SD block write testJean-Jacques Hiblot
Add a standalone MMC block write test. This allows direct testing of MMC access rather than relying on doing so as a side-effect of e.g. DFU or UMS testing, which may not be enabled on all platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2019-07-31test: dm: clk_ccf: test composite clkPeng Fan
Test composite clk with dm ccf Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: sandbox: add composite clkPeng Fan
Add composite clk to sandbox driver Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31configs: sandbox: Enable composite clkPeng Fan
Enable composite clk for sandbox test Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: gate: support sandboxPeng Fan
Introduce io_gate_val for sandbox clk gate test usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: add composite clk supportPeng Fan
Import clk composite clk support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk-provider: include clk-uclass.hPeng Fan
Because clk-provider use clk_ops, so let's include clk-uclass.h Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31dm: clk: ignore default settings when node not validPeng Fan
When the device not binded with a node, we need ignore the parents and rate settings. Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: imx: gate2 add set ratePeng Fan
Add set rate for imx clk-gate2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: imx: import clk heplersPeng Fan
Import some clk helpers from Linux Kernel for i.MX8MM usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: fixed_rate: export clk_fixed_ratePeng Fan
Export the structure for others to use. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: divider set rate supporrtPeng Fan
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: add clk-gate supportPeng Fan
Import clk-gate support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: export mux/divider opsPeng Fan
Export mux/divider ops and divider_recalc_rate for composite usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: mux: add set parent supportPeng Fan
Add set parent support for clk mux Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: use clk_dev_bindedPeng Fan
Preparing to support composite clk. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: introduce clk_dev_bindedPeng Fan
When support Clock Common Framework, U-Boot use dev for clk tree information, there is no clk->parent. When support composite clk, it contains mux/gate/divider, but the mux/gate/divider is not binded with device. So we could not use dev_get_uclass_priv to get the correct clk_mux/gate/divider. So add clk_dev_binded to let choose the correct method. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31dw_mmc: turn on the IO supplyUrja Rannikko
Fixes the microSD slot on the ASUS C201. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com<mailto:peng.fan@nxp.com>>
2019-07-30Merge tag 'video-for-2019.10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix EDID mode filtering - extend mxc_ipuv3_fb to enable backlight/display - include fb_base in global_data for DM_VIDEO - show frame buffer address via board info as used to be with legacy VIDEO support
2019-07-30Merge tag 'xilinx-for-v2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2019.10 fpga: - Xilinx virtex2 cleanup - Altera cyclon2 cleanup zynq: - Minor Kconfig cleanup - Add psu_init configuration for Z-turn board zynqmp: - Add support for pmufw config passing to PMU - script for psu_init conversion - zcu1275 renaming xilinx: - Add support for UltraZed-EV SoM
2019-07-30Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2019-07-30efi_selftest: sharpen ConvertPointer() testHeinrich Schuchardt
Now that ConvertPointer() is implemented throw an error if the result is incorrect. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: implement ConvertPointer()Heinrich Schuchardt
Implement the ConvertPointer() runtime service. Suggested-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: definition of efi_virtual_address_map()Heinrich Schuchardt
Use efi_uintn_t where the UEFI spec uses UINTN. Use efi_uintn_t also for the result of the division of two efi_uintn_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_selftest: fix SetVirtualAddressMap unit testHeinrich Schuchardt
We read the address map before assigning the memory for the pages that will be mapped to virtual addresses. So these pages will overlap with the entry for EFI_CONVENTIONAL_MEMORY. We have to ensure that every page is described at most once in the map. Remove EFI_CONVENTIONAL_MEMORY from the map that we pass to SetVirtualAddressMap(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30doc: integrate UEFI documentation into Sphinx toctreeHeinrich Schuchardt
Change the UEFI documentation to Sphinx style and integrate it into the rest of the Sphinx generated documentation. Remove the inaccurate TODO list in doc/uefi/uefi.rst. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: efidebug.c function documentationHeinrich Schuchardt
make htmldocs produces a warning: ./cmd/efidebug.c:733: WARNING: Unexpected indentation. Correct the indentation. Remove 'See above for details of sub-commands.' which is not helpful in the Sphinx generated documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: always rebuild efi_crt0.oHeinrich Schuchardt
When changing the architecture without calling 'make clean' a subsequent make fails with lib/efi_loader/efi_crt0.o: file not recognized: File format not recognized Force efi_crt0.o to be always rebuild. Reported-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: re-enable GRUB workaround on 32bit ARMHeinrich Schuchardt
GRUB on ARM 32bit prior to version 2.04 lacks proper handling of caches. In U-Boot v2019.04 a workaround for this was inadvertently removed. The workaround is currently also needed for booting on systems with caches that cannot be managed via CP15 (e.g. with an i.MX6 CPU). Re-enable the workaround and make it customizable. Fixes: f69d63fae281 ("efi_loader: use efi_start_image() for bootefi") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2025-01-04 07:00:36 +0000