summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-08x86: Move common Intel CPU info code into a functionSimon Glass
Add cpu_intel_get_info() to find out the CPU info on modern Intel CPUs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: add parameter and return value descriptions] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: fsp: Add access to variable MRC dataSimon Glass
With FSP2 the non-volatile storage used by the FSP to init memory can be split into a fixed piece (determined at compile time) and a variable piece (determined at run time). Add support for reading the latter. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: fsp: Add a few more definitions for FSP2Simon Glass
Add definitions for the FSP signature and the FSP init phase. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08efi: Move inline functions to unconditional part of headerSimon Glass
At present these two functions are defined in efi_loader.h but only if CONFIG_EFI_LOADER is enabled. But these are functions that are useful to other code, such as that which deals with Intel Handoff Blocks (HOBs). Move these to the top of the function. Possibly ascii2unicode() should not be an inline function, since this might impact code size. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: fsp: Move common support functions into a common fileSimon Glass
Some of this file can be shared between FSP1 and FSP2. Move it into a shared file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move common fsp functions into a common fileSimon Glass
Some of this file can be shared between FSP1 and FSP2. Move it into a shared file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: fsp: Move common dram functions into a common fileSimon Glass
Most of the DRAM functionality can be shared between FSP1 and FSP2. Move it into a shared file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: rebase the patch against u-boot-x86/next to get it applied cleanly] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: fsp: Tidy up comment style a littleSimon Glass
The comments in the FSP code use a different style from the rest of the x86 code. I am not sure it this is intentional. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix 2 comment style issues] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: fsp: Use if() instead of #ifdefSimon Glass
Update a few #ifdefs to if() to improve build coverage. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: recover the codes that got wrongly deleted in dram_init()] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: fsp: Create a common fsp_support.h headerSimon Glass
Many support functions are common between FSP1 and FSP2. Add a new header to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: remove forward declarations in fsp_support.h] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Rename some FSP functions to have an fsp_ prefixSimon Glass
Given these exported function an fsp_ prefix since they are declared in an fsp.h header. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: sysreset: Allow reset driver to be included in SPL/TPLSimon Glass
At present this driver is always included in SPL and TPL, if U-Boot proper enables it. Update the Makefile to provide full control using the existing Kconfig options. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: make the Kconfig help text a little bit clearer] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08spl: Add a function to determine the U-Boot phaseSimon Glass
U-Boot is built in three phases: TPL, SPL and U-Boot proper. Sometimes it is necessary to use different init code depending on the phase. For example, TPL might do very basic CPU init, SPL might do a little more and U-Boot proper might bring the CPU up to full speed and enable all cores. Add a function which allows easy determination of the current phase being built. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08spl: Set up the bloblist in board_init_r()Simon Glass
At present the bloblist is set up in spl_common_init() which can be called from spl_early_init(), i.e. before SDRAM is ready. This prevents the bloblist from being located in SDRAM, which is useful on some platforms where SRAM is inaccessible after U-Boot relocates (e.g. x86 CAR region). It doesn't serve much purpose to have the bloblist available early, since very little is known about the platform then, and the handoff info is written when SPL is about to jump to U-Boot. Move the code to board_init_r() to avoid any restrictions. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08spl: Add an arch-specific hook for writing to SPL handoffSimon Glass
At present there is an arch-specific area in the SPL handoff area intended for use by arch-specific code, but there is no explicit call to fill in this data. Add a hook for this. Also use the hook to remove the sandbox-specific test code from write_spl_handoff(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08spl: handoff: Correct Kconfig condition for SPL and TPLSimon Glass
At present these options can be enabled when bloblist is not enabled for SPL or TPL. This is incorrect as SPL handoff requires bloblist. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08spl: Avoid checking for Ctrl-C in SPL with print_buffer()Simon Glass
We don't have a console in SPL so it doesn't make sense to check for Ctrl-C when printing a memory dump. Skip this so that print_buffer() can be used in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08serial: ns16550: Allow serial to enabled/disabled in SPLSimon Glass
At present this driver uses the wrong condition for including the code and drivers in SPL/TPL. Update it so that the code is only included if DM_SERIAL is enabled for SPL/TPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08mtd: spi: Add 'struct spi_flash {' to the codeSimon Glass
At present spi_flash is defined to be spi_nor which is confusing since it is not possible to find the 'spi_flash' by normal text search. Add a comment to help with this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08binman: Allow selection of logging verbositySimon Glass
Support a new BINMAN_VERBOSE option to the build, to allow passing the -v flag to binman. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08binman: Pass the toolpath to binman from the main MakefileSimon Glass
Pass in the toolpath in case binman needs to use tools compiled in the U-Boot tools/ directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move fsp_ffs.h include to fsp_arch.hSimon Glass
This include file is only used for FSP v1. Avoid including it from fdt_support.h so we can use the latter with FSP v2. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move fsp_bootmode.h to the generic fsp directorySimon Glass
This header file is the same for FSP v1 and v2, although there may be some additions to come. Move it into the generic fsp directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move fsp_infoheader.h to the generic fsp directorySimon Glass
This header file is the same for FSP v1 and v2. Move it into the general fsp directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: move rename of fsp_infoheader.h from previous patch to this one] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move fsp_hob.h to the generic fsp directorySimon Glass
This header file is the same for FSP v1 and v2. Move it into the general fsp directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: remove inclusion of fsp_hob.h in fsp_support.h] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move fsp_fv.h to the generic fsp directorySimon Glass
This header file is the same for FSP v1 and v2. Move it into the general fsp directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move fsp_types.h to the generic fsp directorySimon Glass
This header file is the same for FSP v1 and v2. Move it into the general fsp directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move fsp_api.h inclusion out of fsp_support.hSimon Glass
This header file is different for each version of FSP. Move it into the fsp_arch.h header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Create a new fsp_arch.h headerSimon Glass
At present fsp_support.h includes fsp_vpd.h which is an FPSv1 concept (VPD means Vital Product Data). For FSPv2 only UPD (Updatable Product Data) is used. To avoid mangling header files, put these two includes in a separate header which we can adjust as necessary for FSPv2. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Move fsp_azalia.h to the generic fsp directorySimon Glass
This header file is the same for FSP v1 and v2. Move it into the general fsp directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: remove forward declarations in fsp_support.h] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08x86: Rename existing FSP code to fsp1Simon Glass
Since there is now a new version of the FSP and it is incompatible with the existing version, move the code into an fsp1 directory. This will allow us to put FSP v2 code into an fsp2 directory. Add a Kconfig which defines which version is in use. Some of the code in this new fsp1/ directory is generic across both FSPv1 and FSPv2. Future patches will address this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-07Prepare v2019.10Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-07NET: DW: fix regression for ARC boardsEugeniy Paltsev
The commit 642b80d256e ("net: designware: drop compatible altr, socfpga-stmmac") breaks designware ethernet for all ARC boards. It removes "altr, socfpga-stmmac" compatible from "drivers/net/designware.c" without changing compatible in the boards which use it. Fix that by adding "snps,arc-dwmac-3.70a" compatible string to "drivers/net/designware.c" and using it in ARC boards device tree. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
2019-10-06Merge branch '2019-10-06-master-imports'Tom Rini
- Regression work-around on SoCFPGA by disabling WDT in some cases. - Fix seg fault on 'host info' in some cases.
2019-10-06cmd: host: fix seg fault at "host info"AKASHI Takahiro
With the patch below applied, host_block_dev structure was switched to be placed in platdata rather than priv. The command "host info" must be aligned with this change. Otherwise, we will see "Segmentation Fault." Fixes: 8f994c860d91 ("sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-06MAINTAINERS: Update my email addressMaxime Ripard
I'm not at bootlin anymore, and my mail address doesn't work any longer. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-06arm: socfpga: disable CONFIG_SPL_WDT for gen5 and a10Simon Goldschmidt
These boards don't have a watchdog enabled in SPL, so make sure CONFIG_SPL_WDT is not enabled. Fixes: commit 6874cb72204f ("watchdog: Split WDT from SPL_WDT") Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-06gitlab-ci: fix typo 'plaforms'Heinrich Schuchardt
%s/plaforms/platforms/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-05Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
2019-10-04Merge branch '2019-10-04-master-imports'Tom Rini
- Assorted TI platform fixes - Revert the change that broke environment flag validation - Assorted typo fixes - Assorted Kconfig dependency fixes - Other minor bug fixes
2019-10-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- dm: core: Correct low cell in ofnode_read_pci_addr() - dm: core: Correct bad cast in ofnode_get_addr_size_index()
2019-10-04Revert "env: solve compilation error in SPL"Tom Rini
This reverts commit 7d4776545b0f8a8827e5d061206faf61c9ba6ea9. The changes here break environment validation and furthermore do not seem to be required. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPLAdam Ford
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup. Fixes: 8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-10-04initcall.h: initcall_run_list(): Improve debug outputOvidiu Panait
Existing debug output is mixed with the function name: initcall_run_list() initcall: 25263initcall_run_list() (relocated to 425263) Turn it to: initcall_run_list() initcall: 25263 (relocated to 425263) Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
2019-10-04Kconfig: fix a typo in the description of bmp command.Andrius Štikonas
Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
2019-10-04Kconfig: Migrate CONFIG_BOOTM_* optionsTom Rini
Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04cmd: part: number: return hexadecimal valueRoman Stratiienko
At this point we are using part number sub-command to retrieve UUID of the partition using it's name. e.g.: part number mmc $mmcdev system_a system_a_index part uuid mmc $mmcdev:${system_a_index} system_a_uuid Since 'part uuid' sub-command expects partition index in hex format and 'part number' returns decimal value, 'part uuid' command will provide wrong UUID or fail. Fixes: be683756f62034 ("cmd: part: Add 'number' sub-command") Cc: Dirk Behme <dirk.behme@de.bosch.com> Reported-by: Pontus Fuchs <pontus.fuchs@se.bosch.com> Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-10-04ARM: keystone2: update the default addresses of the secure monitorJean-Jacques Hiblot
To accommodate the growth of u-boot, we need to shift the location of the secure monitor. Moving it 64kB further. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-04board: ti: am654: Disable TRNG node for HS devicesAndrew F. Davis
On HS devices the access to TRNG is restricted on the non-secure ARM side, disable the node in DT to prevent firewall violations. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-04autoboot: add necessary dependency at AUTOBOOT_MENU_SHOWAKASHI Takahiro
Otherwise, menu_show() will be undefined in bootdelay_process(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
generated by cgit (git 2.34.1) at 2024-12-29 03:43:25 +0000